GTE Omni Scbs Installation And Maintenance Manual

Service Functions/ 
St&o 
DESCRIPTION 
@ NlGHT ANSWER ASSIGNMENT ALLOWS BNCOMING CALLS TO BE DlRECTED TO A SPEClFlC NIGHT ANSWER 
STATlON OR TO ACTIVATE A NIGHT BELL WHICH ALLOWS A PICK-UP BY ANY INTERNAL STATION. 
@ SYSTEM DEFAULT CAPACITY IS 16 NIGHT ANSWER GROUPS* WITH UP TO 8 MEMBERS IN EACH GROUP. 
o DEFAULT ACCESS CODE TO ANSWER NIGHT RINGING CALL IS #31 (ALL TENANT) OR #30 (SELF TENANT). 
NOTE: ACCESS CODE MAY BE CHANGED WITH CMC-100. 
Q, AT LEAST ONE TRUNK AND ONE STATION MUST BE ASSIGNED TO...

Programming Service 
Functions/ 
CMC Command Summary 
e 
e 
e 
e 
0 
0 
0 
CATEGORY 
CM6 TABLE 
FUNCTION 
SYSTEM SPEED CALLING 
300 ADDS, REMOVES, OR CHANGES SYSTEM 
DIRECTORY 
SPEED CALLING DIRECTORY NUMBERS. 
STATION HUNT GROUP 
ASSIGNMENT 
301 ASSIGNS, REMOVES, OR CHANGES VOICE 
OR DATA FROM ONE OF THREE TYPES OF 
HUNT GROUPS: CIRCULAR, TERMINATING 
OR PILOT. 
PICKUP GROUP 
ASSIGNMENT 
302 ASSIGNS, REMOVES OR CHANGES 
STATIONS FROM PICK-UP GROUPS. 
EKT SYSTEM PAGING GROUP 303 
ASSIGNS, REMOVES OR...

DESCRIPTION 
@ NlGHT ANSWER ASSIGNMENT ALLOWS lNCOMlNG CALLS TO BE DIRECTED TO A SPEClFlC NlGHT ANSWER 
STATION OR TO ACTlVATE A NIGHT BELL WHICH ALLOWS A PICK-UP BY ANY lNTERNAL STATION. 
@ SYSTEM DEFAULT CAPACITY IS 16 NIGHT ANSWER GROUPS* WITH UP TO 8 MEMBERS IN EACH GROUP. 
8 DEFAULT ACCESS CODE TO ANSWER NIGHT RINGING CALL IS #3l (ALL TENANT) OR #30 (SELF TENANT). 
NOTE: ACCESS CODE MAY BE CHANGED WITH CMC-100. 
@ AT LEAST ONE TRUNK AND ONE STATION MUST BE ASSIGNED TO INITIALIZE NIGHT ANSWER...

Programming rvice Cunctions/ 
C Comma Summary 
CATEGORY 
CM6 TABLE 
FUNCTION 
@ SYSTEM SPEED CALLING 
300 ADDS, REMOVES, OR CHANGES SYSTEM 
DIRECTORY 
SPEED CALLlNG DIRECTORY NUMBERS. 
@ STATION HUNT GROUP 
ASSIGNMENT 301 ASSIGNS, REMOVES, OR CHANGES VOICE 
OR DATA FROM ONE OF THREE TYPES OF 
HUNT GROUPS: CIRCULAR, TERMINATING 
OR PILOT. 
@ PICKUP GROUP 
302 ASSIGNS, REMOVES OR CHANGES 
ASSIGNMENT 
STATIONS FROM PICK-UP GROUPS. 
@ EKT SYSTEM PAGING GROUP 303 
ASSIGNS, REMOVES OR CHANGES EKT 
ASSIGNMENT...

- Programming 
PERFORM THE FOLLOWING PROGRAMMlNG TASKS IN THE SEQUENCE OUTLlNED BELOW USING THE 
SAMPLE WORK ORDERS AND IN ACCORDANCE WITH THE GTE OMNl SBCS GTEP MANUAL. COMPLETE 
THE REVlEW EXERCISE QUESTIONS PERTAINING TO PROGRAMMING SERVICE FUNCTIONS UPON 
COMPLETION OF THIS 
LABORATORY ACTIVITY. 
WORK ORDER #2.5 
ZOMPANY NAME: NU SYSTEM CO. 
PHONE #: (703) 555-1212 
-0CATION: RESTON, VlRGlNfA WORK ORDER #2.5 (TASK #1) 
)RfGfNATOR: TELECOMMUNICATIONS MANAGER 
TASKS: 
l 
Establish a system speed...

Laboratory Activity - Programming 
PBS (Continued) 
ml ah%mw SBCS 
1 
WORK ORDER # 2.5 
-I 
:OMPANY NAME: NU SYSTEM CO. PHONE #: (703) 555-1212 
-0CATION: RESTON, VIRGINIA WORK ORDER # 2.5 (TASK #2) 
)RlGlNATOR: TELECOMMUNICATIONS MANAGER 
-ASKS: 
l Assign stations to a hunt group with CMC-301. 
‘ARAMETERS: INSTRUCTIONS: 
(1) Assign stations to a terminating type hunt (1) Perform programming change for service 
group using the following parameters: function. 
TERMINATING (2) Check/test the operation of...

WORK ORDER #2.5 
COMPANY NAME: NU SYSTEM CO. PHONE #: (703) 5551212 
LOCATION: 
RESTON, VfRGlNlA WORK ORDER # 2.5 (TASK #3) 
DRIGINATOR: TELECOMMUNICATIONS MANAGER 
TASKS: 
e Assign stations to a pickup group with CMC-302. 
(1) Assign the following stations to designated 
pickup groups. 
PICKUP GROUP 
1 
1 
1 
2 
2 
2 STATION DN (2) Check/test the operation of changes after 
completion of this portion of the laboratory 
(3) Proceed to next work order task. 
2.112  

Laboratory Activity - Programming Service 
ens (Continue 
WORK ORDER # 2.5 
:OMPANY NAME: NU SYSTEM CO. PHONE #: (703) 555-1212 
.OCATION: RESTON, VIRGINIA WORK ORDER #2.5 (TASK #4) 
IRIGINATOR: TELECOMMUNICATIONS MANAGER 
-ASKS: 
l Create a hot line service with CMC-304. 
‘ARAMETERS: INSTRUCTIONS: 
(1) Assign hot line service using the following 
(1) Perform programming change for service 
parameters: function. 
Hot line number = 1 (2) Check/test the operation of changes after 
Originating station = 216...

WORK ORDER # 2.5 
IOMPANY NAME: NU SYSTEM CO. 
PHONE #: (703) 5551212 
-0CATION: RESTON, VIRGINIA WORK ORDER #2.5 (TASK #5) 
)RtGlNATOR: TELECOMMUNICATIONS MANAGER 
-ASKS: 
e Remove hot line service with CMC-304. 
e Create an internal paging group with CMC-303. 
(1) Remove previously assigned hot line service (1) Perform programming changes for service 
from station directory numbers 216 and 225. functions. 
(2) Assign all CS-20 and CS-10 EKT instruments to (2) Check/test the operation of changes after...

Laboratory 
hnctio Programming Service 
COMPLETE MUSIC-ON-HOLD SERVICE FUNCTION TASK IF TIME PERMITS OR IF INSTRUCTOR 
DIRECTS YOU TO DO SO. 
WORK ORDER # 2.5 
COMPANY NAME: NU SYSTEM CO. 
LOCATION: 
RESTON, VIRGINIA 
3RIGINATOR: TELECOMMUNICATIONS MANAGER 
TASKS: 
PHONE #: (703) 5551212 
WORK ORDER #2.5 (TASK #6) 
l 
Assign music-on-hold with CMC-305. 
PARAMETERS: 
INSTRUCTIONS: 
(1) Verify that the music-on-hold service has been (1) Perform programming change for service 
physically connected to...