GTE Omni Scbs Installation And Maintenance Manual

Laboratory Activity - System-Wide 
Programming Changes (Continued) 
WORK ORDER #2.7 
COMPANY NAME: NU SYSTEM CO. PHONE #: (703) 5551212 
LOCATION: RESTON, VIRGINIA WORK ORDER #2.7 (TASK #4) 
DRlGlNATOR: TELECOMMUNICATIONS MANAGER 
TASKS: 
l Modify a system timing parameter with CMC-103. 
(1) Change the timing value for “call park recall” (1) Perform programming change for system-wide 
to l/2 minute. (Note: current multiplier is set at 
61, yielding a default timing value of 62.464. A 
multiplier of 88...

Laboratory Activity - Systizm-Wide 
Programming Changes (Continued) 
GTE OMNn SBCS 
WORK ORDER #2.7 
ZOMPANY NAME: NU SYSTEM CO. 
PHONE #: (703) 555-1212 
-0CATION: RESTON, VIRGINIA WORK ORDER #2.7 (TASK #5) 
IRlGlNATOR: TELECOMMUNICATIONS MANAGER 
TASKS: 
l Modify the default network PAD circuit values with CMC-106. 
‘ARAMETERS: 
INSTRUCTIONS: 
(1) Reduce the PAD value for outgoing station dial 
(1) 
tone with the following parameters: Perform programming change for system-wide 
function. 
Incoming...

_- 
2.148  

Review Exercise - System-Wide 
Programming Changes (2.7) 
INSTRUCTIONS: THE FOLLOWING EXERCISE CONSISTS OF MULTIPLE CHOICE, TRUE/FALSE, FILL 
IN THE BLANK, OR MATCHING TYPE QUESTIONS. ALL AVAILABLE RESOURCES (I.E., STUDENT 
WORKBOOK, NOTES, AND GTEP MANUAL) MAY BE USED AS REFERENCES. SUBMIT EXERCISE TO 
INSTRUCTOR FOR GRADING WHEN LAST QUESTION HAS BEEN COMPLETED. 
1. THE DEFAULT FEATURE NUMBER (FNO) FOR GROUP PICKUP IS 
AND DEFAULT 
FEATURE ACCESS CODE IS . 
2. FEATURE ACCESS CODES MAY BE COMPOSED OF A...

Review Exercise - System-Wide 
Programming Changes 
(2,7) (Continued) 
8. HOW IS TIMING CALCULATED FOR SYSTEM TIMING VALUES? 
9. WHAT MULTIPLIER VALUE WOULD YOU USE TO CHANGE THE CALL ANNOUNCE WARNING 
BURST TO ONE SECOND? 
IO. WHAT MULTIPLIER VALUE WOULD YOU USE TO CHANGE THE DSS CAMP-ON RECALL TIMING 
TO 1% MINUTES? 
11. WHEN MIGHT IT BE NECESSARY TO CHANGE THE DEFAULT PAD CIRCUIT VALUES? 
12. STATION USERS HAVE COMPLAINED THAT THE BUSY TONE IS TOO LOUD. WHAT 
PARAMETERS NEED CHANGING WITH CMC-106 TO...

Student Notes 
2.151  

DATA BASE ADMINISTRATION 
Programming Station Message 
Detail Recorder 
2.152  

2.8 Emablinq Obiective 
GIVEN: . 
l 
l 
0 
0 
0 
ACTION: . 
0 
CRITERIA: @ 
l 
GTE OMNI SBCS 
GTE OMNI SBCS Peripherals 
PORTABLE MAINTENANCE PANEL 
GTE OMNI SBCS COURSE AND SITE DOCUMENTATION PACKAGE 
LABORATORY ACTIVITY - PROGRAMMING STATION MESSAGE 
DETAIL RECORDER 
REVIEW EXERCISE 
USE OMNI SBCS PROGRAMMING TOOLS AND EQUIPMENT TO: 
- INSTALL STATION MESSAGE DETAIL RECORDER AND ASSIGN 
CALL SCREENING OPTIONS. 
COMPLETE REVIEW EXERCISE. 
DEMONSTRATION OF ABOVE TASKS IN ACCORDANCE WITH PRO- 
CEDURES...

- 
Programming Station Message Detail 
Recorder/SM 
creening 
GTE OMN~ SBCS 
1 DESCRIPTION 1 
l PROVIDES LOCAL PRINTOUT OF SYSTEM CALL INFORMATION. 
. 
IF SMDR OPTION IS INSTALLED THE FOLLOWING INFORMATION IS RECORDED FOR EVERY CALL: 
- TIME OF CALL ORIGINATION 
- CALL DURATION RECORDED IN HOURS, MINUTES, AND SECONDS 
- ORIGINATING STATION NUMBER 
- TRUNK NUMBER WITH IDENTIFICATION 
- CALLING PARTY IDENTIFICATION 
- TRUNK ACCESS CODE 
- DIRECTORY NUMBER DIALED AND PERSONAL ACCOUNTING CODE (SVR 1.5.X.X)...

1 PROCEDURE * 1 
1. USE CMC-500 TO ASSIGN SMDR OUTPUT OPTIONS ON OUTGOING CONNECTION: 
. CO OUTGOING CONNECTION (PI) 
CMC=500 
. TIE LINE OUTGOING CONNECTION (P2) 
n 
PI: 1 P4: 1 
. ACCOUNT FLAG (P3) 
P2: 0 
. TOLL CALL FLAG (P4) P3: 0 
2. USE CMC-501 TO ASSIGN TRUNK GROUPS FOR SMDR OUTPUT: 
CMC=501 
I I  Pl: 13 
. TRUNK GROUP NUMBER (PI)** 
P2: 1 
. OUTPUT IDENTIFICATION FLAG (P2) 
3. USE CMC-502 TO ASSIGN COR FOR StiDR OUTPUT: 
. CLASS OF RESTRICTION (PI) 
. OUTPUT IDENTIFICATION FLAG (P2) 
4. USE...