GTE Omni Scbs Installation And Maintenance Manual

Programming Toll and Multi-Digit/ 
Restriction Assignment 
1 DESCRIPTION 1 
. RESTRICTS CONNECTION TO CO (INCLUDING FX OR WATS) AND TIE TRUNK LINES. 
. 16 COR LEVELS MAY BE ASSIGNED WITH COR LEVEL 1 BEING LEAST RESTRICTIVE AND COR LEVEL 16 BEING MOST 
RESTRICTIVE. 
. COR DESIGNATION MAY BE MADE SEPARATELY FOR INCOMING OR OUTGOING CONNECTIONS. 
. DEFAULT DATA BASE ASSIGNS ALL STATIONS AND TRUNK GROUPS TO COR LEVEL 1 WHICH ALLOWS ACCESS AND 
CONNECTION TO ALL AVAILABLE TRUNK GROUPS. 
REVIEW DEFAULT COR...

ogrammi 
striction 
stricti B and Multi-Digit/ 
nd Office Code 
ts 
@ DEFINES AREA CODE AND OFFICE CODE RESTRICTIONS FOR OUTGOING TRUNK GROUPS TO 
CONTROL TOLL EXPENSES AND PREVENT TELEPHONE ABUSE. 
* RESTRICTED AREA CODES AND OFFICE CODES MUST BE DETERMINED AND ASSIGNED TO AREA 
CODE, OFFICE CODE, AND AREA/OFFICE CODE TABLE. THESE TABLES ARE ASSIGNED TO CLASS OF 
RESTRICTION ON AN ALLOWED OR DENIED BASIS. 
Q SYSTEM BLOCKS ANY CALLS PLACED TO RESTRICTED AREA CODES OR OFFICE CODES. 
@ SYSTEM CAPACITY IS...

Programming Toll and Multi-Digit 
Restriction/ Area/Office Co’de 
estriction Assignment 
1-1 (Continued) 
3. 
USE CMC-412 TO DEFINE OFFICE CODES TO BE INCLUDED IN RESTRICTION TABLE: 
. RESTRICTION GROUP NUMBER (Pi) 
. CLASS OF RESTRICTION (P2) 
CMC=412 
. CALLS ALLOWED/DENIED FLAG (P3)* Pl: 1 P4: 279 
. OFFICE CODE (P4) 
cl P2: 3 
P3: 1 
NOTE: REPEAT ABOVE STEPS TO ADD OTHER OFFICE CODES. 
4. 
USE CMC-414 TO DEFINE COMBINED OFFICE AND AREA CODES TO BE INCLUDED IN RESTRICTION 
TABLE: 
. RESTRICTION GROUP...

. CMC-400 ASSIGNS DIALING GROUP AND RESTRICTION GROUP NUMBERS TO DESIGNATED TRUNK GROUP NUMBERS. 
. CMC-401 IDENTIFIES CUSTOMER TOLL PREFIX CODES AND OPERATOR TOLL PREFIX CODES WITH TRUNK DIAL 
GROUP NUMBERS. DEFAULT SETTING FOR CUSTOMER TOLL PREFIX IS l+. DEFAULT SETTING FOR OPERATOR TOLL 
PREFIX IS O+. 
. CMC-402 PROVIDES ASSIGNMENT FOR THOSE AREAS WHICH REQUIRE A PROGRAMMED NO/lx OFFICE CODE DUE TO 
CONFLICTING OFFICE AND AREA CODES (E.G., LOS ANGELES, CHICAGO, NEW YORK, ETC.) 
[PROCEDURES 
1. USE...

-- 
Programming Toll and Multi-Digit 
Restriction/,SCC Restriction Assignment 
GTE 0M.U SBCS 
(DESCRIPTION 1 
e DEFINES SCC ACCESS CODE RESTRICTION TABLE AND ASSIGNS TABLE 
TO RESTRICTION GROUPS BASED ON CLASS OF RESTRICTION. 
. UP TO 10 CARRIER ACCESS CODES MAY BE ASSIGNED TO EACH COR. 
1 PROCEDURE 1 
1. IF APPLICABLE USE CMC-415 TO ASSIGN/REMOVE: 
CMC=415 
. RESTRICTION GROUP NUMBER (PI) Pl: 2 
. CLASS OF RESTRICTION (P2) 
L-J P2: 3 
P3: 10288 
a CARRIER ACCESS CODE (P3) 
2.170  

Programming Toll and Multi-Digit 
Restriction/CMC Command Summarv 
0 
0 
0 
0 
0 
0 
l 
0 
0 
0 
0 
CATEGORY CMC TABLE 
TRUNK RESTRICTION CMC 105 
STATION CLASS OF 
RESTRICTION CMC 202 
TRUNK CLASS OF 
RESTRICTION CMC 252 ASSIGNS COR TO TRUNKS FOR DAY/NIGHT MODE 
TRUNK DIALING GROUP/ 
RESTRICTION GROUP 
ASSIGNMENT 
TOLL PREFIX AND 
OPERATOR ACCESS 
CODE ASSIGNMENT 
NO/lx OFFICE CODE 
ASSIGNMENT 
TOLL AND OPERATOR 
CALL RESTRICTION 
ASSIGNMENT 
OFFICE CODE 
RESTRICTION 
AREA CODE 
RESTRICTION 
AREA/OFFICE...

PROGRAMMING UPON COMPLETION OF THIS LABORATORY SETTING. 
. 
Laboratory Activity - Multi-Digit 
Restriction Programming (Continued) 
GE OMNU SBCS 
PERFORM THE FOLLOWING PROGRAMMING TASKS IN THE SEQUENCE OUTLINED BELOW USING 
THE SAMPLE WORK ORDERS AND IN ACCORDANCE WITH THE GTE OMNI SBCS GTEP MANUAL. 
COMPLETE THE REVIEW EXERCISE QUESTIONS PERTAINING TO MULTI-DIGIT RESTRICTION 
WORK ORDER #2.9 
COMPANY NAME: NU SYSTEM CO. PHONE #: (703) 5551212 
LOCATION: 
RESTON, VIRGINIA WORK ORDER #2.9 (TASK #l)...

Laboratory Activity - Multi-Digit 
Restriction Progra 
ing (Co tinued) 
GE OMNU SBCS 
WORK ORDER #2.9 
ZOMPANY NAME: NU SYSTEM CG: 
.OCATION: RESTON, VIRGINIA 
IR.lGINATOR: TELECOMMUNICATIONS MANAGER 
;ASKS: PHONE #: (703) 555-1212 
WORK ORDER 2.9 (TASK #2) 
0 Assign station directory numbers to Class of Restriction with CMC-202. 
‘ARAMETERS: INSTRUCTIONS: 
(1) Assign the following stations to the’following (1) Perform programming changes for Multi-digit 
designated COR levels: 
Restriction....

Laboratory 
estriction Iti-IBisit 
WORK ORDER #2.9 
COMPANY NAME: NU SYSTEM CO. PHONE #: (703) 555-1212 
-0CATION: RESTON, VIRGINIA WORK ORDER 2.9 (TASK #3) 
3RIGINATOR: TELECOMMUNICATIONS MANAGER 
TASKS: 
e Assign trunk group numbers to dial groups and restriction groups with CMC-400. 
e Assign customer toll prefix and operator access codes to dial groups with CMC-401. 
(1) Assign TGN 13 to dialing group number 1 and (1) Perform programming changes for Multi-digit 
restriction group number 1 using...

Laboratory Activity - Multi-Digit 
Restriction Programming (Continued 
WORK ORDER #2.9 
COMPANY NAME: NU SYSTEM CO. PHONE #: (703) 5551212 
-0CATION: 
RESTON, VIRGINIA WORK ORDER 2.9 (TASK #4) 
3RIGINATOR: TELECOMMUNICATIONS MANAGER 
TASKS: 
l Assign toll restrictions to a restriction group and assign the restriction groups to a Class 
of Restriction with CMC-411. 
PARAMETERS: 
INSTRUCTIONS: 
(1) Assign the following toll restrictions and COR (1) Perform programming changes for Multi-Digit 
levels to the...