GTE Omni Scbs Installation And Maintenance Manual

Programming Station Message 
etail Recorder/SMDR 
a?wt F 
@ TIME MESSAGE IS PRINTED WITH SMDR REPORT TO SEPARATE EACH SMDR MESSAGE. TIME INCRE- 
MENTS BY HOUR. 
09:27 02107186 
(1) (2) 
Time Date 
. SAMPLE OUTPUT: 
08:15 00.00.36 ST 0201 Cl234 1600 07035344789 123456780123 00 00 
(1) 
(2) (3) (4) (5) (6) (7) (8) (0% (10) 
(I) = Time of call origination 
(2) = Duration of call 
(3) = Calling party identification: 
ST = Station 
AT = Attendant 
TI = TIE trunk 
(4) = Originating Station number 
(5) = Trunk...

Programming Station Message 
Detail Recorder/CMC 
Command Summary 
CATEGORY 
l OUTGOING MDR 
l MDR TRUNK SCREEN 
. CLASS OF RESTRICTION 
. TENANT 
. CALL DURATION 
CMC TABLE 
FUNCTION 
CMC-500 SELECTS CO, TIE, ACCOUNT AND TOLL 
FOR SMDR OUTPUT 
CMC-501 SELECTS TRUNK GROUPS FOR MDR 
OUTPUT 
CMC-502 
SELECTS COR GROUPS FOR MDR OUTPUT 
CMC-503 SELECTS TENANTS FOR SMDR OUTPUT 
CMC-504 
SETS MINIMUM CALL DURATION FOR MDR 
REGISTRATION 
NOTE: REFER TO MODULE Ill FOR SMDR MAINTENANCE COMMANDS 
(CMC-705) AND...

- 
,, 
Laboratory Activity - Station Message 
etail 
Recsr rogramming 
GTE OMNU SBCS 
PERFORM THE FOLLOWING PROGRAMMING TASKS IN THE SEQUENCE 
OUTLlNED BELOW USING THE SAMPLE WORK ORDERS AND IN ACCOR- 
DANCE WITH THE GTE OMNI SBCS GTEP MANUAL. COMPLETE THE REVIEW 
EXERCISE QUESTIONS PERTAINING TO STATION MESSAGE DETAIL RE- 
CORDER PROGRAMMING UPON COMPLETION OF THIS LABORATORY 
ACTIVITY. 
WORK ORDER #2.8 
ZOMPANY NAME: NU SYSTEM CO. PHONE #: (703) 5551212 
-0CATION: RESTON, VIRGINIA WORK ORDER 
#2.8...

Laboratory Activity - Station 
Message Detail Recorder 
Programming (Continued) 
WORK ORDER #2.8 
COMPANY NAME: NU SYSTEM CO. 
LOCATION: RESTON, VIRGINIA 
ORIGINATOR: TELECOMMUNICTIONS MANAGER 
TASKS: PHONE #: (703) 5551212 
WORK ORDER #2.8 (TASK #2) 
l Establish minimum call duration for SMDR with CMC-504. 
PARAMETERS: 
INSTRUCTIONS: 
(1) Specify 45 seconds for “minimum call duration” (1) Perform programming changes for Station 
to receive SMDR output. Message Detail Recorder. 
(2) Check/test the...

oratory wity - Station Message 
tail .Reco mming (Continued) 
WORK ORDER #2.8 
:OMPANY NAME: NU SYSTEM CO. PHONE #: (703) 555-1212 
.OCATION: RESTON, VIRGINIA WORK ORDER #2.8 (TASK #3) 
)RfCfNATCR. TELECOMMUNICATIONS MANAGER 
-ASKS: 
e Assign SMDR output for COR with CMC-502. 
‘ARAMETERS. 
(1) Change COR 3 and 4 to indicate “no SMDR 
OUTPUT”. INSTRUCTIONS: 
(1) Perform programming changes for Station 
Message Detail Recorder. 
(2) Check/test the operation of changes after 
completion of this portion of...

Student Notes 
P 
2.161  

Review Exercise - Station Message Detail 
Recorder (2.8) 
GTE OMNU SBCS 
INSTRUCTIONS: THE FOLLOWING EXERCISE CONSISTS OF MULTIPLE CHOICE, TRUE/FALSE, FILL 
IN THE BLANK, OR MATCHING TYPE QUESTIONS. ALL AVAILABLE RESOURCES (I.E. STUDENT 
WORKBOOK, NOTES, AND GTEP MANUAL) MAY BE USED AS REFERENCES. SUBMIT EXERCISE TO 
INSTRUCTOR FOR GRADING WHEN LAST QUESTION HAS BEEN COMPLETED. 
1. 
2. 
3. 
4. 
5. THE FOLLOWING INFORMATION IS RECORDED FOR EVERY CALL IF SMDR OUTPUT IS 
SELECTED: ~ 
A. TIME OF CALL...

Review Exercise 
- Station Message 
Detail Recorder 
(2.8) 
GUE c&MN/ SBCS 
6. WHAT CMC COMMAND, PARAMETERS, AND SETTlNG WOULD BE REQUIRED TO PROVIDE SMDR 
OUTPUT FOR COR LEVELS 6 AND 16? 
7. IS IT NECESSARY FOR ALL FIVE TENANTS TO RECEIVE SMDR OUTPUT? 
PLEASE EXPLAIN 
8. MATCH EACH OF THE FOLLOWING CMC COMMANDS WITH ITS CORRECT DEFINITION: 
CMC-500 
A. SMDR COR SCREENING ASSIGNMENT 
CMC-501 
B. SMDR CALL DURATION SCREENING ASSIGNMENT 
CMC-502 
C. SMDR OUTGOING CONNECTION SCREENING ASSIGNMENT 
CMC-503 D....

DATA BASE ADMINISTRATION 
Programming Toll and 
Multi-Digit Restriction 
2.164  

abling Objective 
GIVEN: 
@ GTE OMNI SBCS 
. GTE OMNI SBCS PERIPHERALS 
@ PORTABLE MAINTENANCE PANEL 
@ GTE OMNI SBCS COURSE AND SITE DOCUMENTATION PACKAGE 
0 LABORATORY ACTIVITY 
- PROGRAMMING TOLL AND MULTI-DIGIT 
RESTRICTION PROGRAMMING 
@ REVIEW EXERCISE 
ACTION: 
. USE OMNI SBCS PROGRAMMING TOOLS AND EQUIPMENT TO: 
- ASSIGN TOLL AND TRUNK GROUP RESTRICTIONS TO CLASS 
OF RESTRICTION TABLE. 
- CREATE AREA CODE, OFFICE CODE, AND COMBINED AREA/ 
OFFICE CODE MULTI-DIGIT RESTRICTION TABLES. 
- ESTABLISH...