GTE Omni Scbs Installation And Maintenance Manual

-*, SC’-.> , .,--.. 
GTE OMNi SLXS 
INSTRUCTIONS: THE FOLLOWING EXERCISE CONSISTS OF MULTIPLE CHOICE, TRUE/FALSE, FILL 
IN THE BLANK, OR MATCHING TYPE QUESTlONS. ALL AVAILABLE RESOURCES (I.E. STUDENT 
WORKBOOK, NOTES, AND GTEP MANUAL) MAY BE USED AS REFERENCES. SUBMIT EXERCISE TO 
INSTRUCTOR FOR GRADING WHEN LAST QUESTION HAS BEEN COMPLETED. 
1. THE DEFAULT STANDARD TERMINATING TRUNK GROUP NUMBER FOR CO TRUNKS IS ~ . 
2. EKT INSTRUMENTS CAN HAVE ~ 
TERMINATING TRUNK GROUP NUMBERS ASSIGNED TO 
EACH...

eview Exercise 
- Programming Trunk 
Termination 
(2.4) (Continued) 
8. 
9. 
10. 
11. 
12. 
13. 
14. 
15. 
IF A CUSTOMER DESIRES ONE OR MORE EKT STATIONS TO HAVE ACCESS TO THE SAME TRUNK 
LINE THROUGH EKT BUTTONS, A 
TRUNK TERMINATION 
SHOULD BE PROGRAMMED. 
THE SYSTEM WILL ALLOW A MAXIMUM DIRECT IN-LINES PER TRUNK GROUP. 
A DIRECT IN-LINE CAN BE ASSIGNED TO BOTH 
OR 
TYPES OF STATION 
INSTRUMENTS. 
CMC- 
IS USED TO ASSIGN OR REMOVE A DIRECT-IN LINE FROM A SPECIFIC STATION. 
A MAXIMUM OF 
POOLED INCOMING...

DATA BASE ADMINISTRATION 
Programming Service 
Functions 
2.100  

2.5 Enabling bjective 
GIVEN: 
. GTE OMNI SBCS 
. GTE OMNI SBCS PERIPHERALS 
. PORTABLE MAINTENANCE PANEL 
e GTE OMNI SBCS COURSE AND SITE DOCUMENTATION PACKAGE 
. LABORATORY ACTIVITY 
- PROGRAMMING SERVICE FUNCTIONS 
0 REVIEW EXERCISE 
ACTION: 
l USE OMNI SBCS PROGRAMMING TOOLS AND EQUIPMENT 
TO: 
- ESTABLISH A SYSTEM SPEED CALLING DIRECTORY. 
- ASSIGN STATIONS TO HUNT AND PICKUP GROUPS. 
- INSTALL AND ASSIGN SYSTEM MUSIC-ON-HOLD FEATURE. 
- CREATE HOT LINE SERVICE. 
- ASSIGN INTERNAL SPEAKER PAGING...

. A MAXIMUM OF 100 DIRECTORY NUMBERS CAN BE PLACED IN A 
SYSTEM SPEED CALLING DIRECTORY. STATION USER DIALS AN ENTRY 
CODE TO ACCESS NUMBER ON SPEED CALLING LIST. 
. DEFAULT STANDARD ACCESS CODE FOR SYSTEM SPEED CALLING 
NUMBER IS ##. 
(PROCEDURE1 
CMC=300 
P3: 9361111 
1. USE CMC-300 TO ASSIGN, CHANGE OR DELETE: 
@ SYSTEM SPEED CALLING USER ENTRY CODE (PI) 
@ ACCESS CODE (SYSTEM ACCESS CODES FOR CO, FX, WATS, TIE 
LINE, SCC OR LCR) (P2) 
0 SEND NUMBER (P3) 
2. USE CM6400 TO CHANGE ACCESS CODE NUMBERING...

Programming Service Functions/ 
Station Hunt Group Assignment 
. STATION DIRECTORY NUMBER MAY BE ASSIGNED TO ONE OF THREE TYPES OF HUNT GROUPS: 
- CIRCULAR - IF CALLED DIRECTORY NUMBER IS BUSY, ALL STATIONS WITHIN GROUP ARE TRIED 
IN TURN UNTIL AN IDLE STATION IS FOUND. IF CALLED DIRECTORY NUMBER IS NOT REACHED 
AFTER CIRCULAR HUNTING, CALLING PARTY IS CONNECTED TO BUSY TONE. 
- TERMINATING - DIRECTORY NUMBERS WITHIN GROUP ARE ASSIGNED A PRIORITY. WHEN 
CALLED STATION IS BUSY, IDLE STATION IS HUNTED IN...

DESCRIPTION 1 
e SYSTEM DEFAULT CAPACITY ALLOWS FOR MAXlMUM OF 10 PICKUP 
GROUPS WITH UP TO 32 DIRECTORY NUMBER MEMBERS IN EACH 
PICKUP GROUP. * 
pii6ziq 
1. USE CMC-362 TO ADD CHANGE OR DELETE: 
0 PICKUP GROUP NUMBER (PI) 
@ DIRECTORY NUMBER OF PICKUP GROUP MEMBER (P2) 
NOTE: EXISTING ENTRIES MUST BE DELETED BEFORE CHANGING PICKUP 
GROUP DIRECTORY NUMBERS. CHANGE (CHG) PROGRAM 
FUNCTION IS USED TO ASSIGN NEW ENTRY. 
* PACKAGE C ALLOWS 26 PICKUP GROUPS. 
2.1Q4  

amming Service Functions/ 
ine Station Assignment 
DESCRIPTION 1 
@ HOT LINE FEATURE ALLOWS FOR SINGLE-LINE STATIONS TO BE PROGRAMMED TO 
AUTOMATICALLY SIGNAL A TERMINATING INTERNAL STATION WHENEVER IT GOES 
OFF-HOOK. 
@ DESIGNATED HOT LINE STATIONS CAN ACCEPT TERMINATING CALLS AND USE 
CONSULTATION HOLD, TRANSFER, AND OTHER SERVICES. 
0 SYSTEM DEFAULT CAPACITY ALLOWS FOR A MAXIMUM OF 10 SYSTEM HOT LINES 
FOR VOICE (PACKAGES A AND B) AND 40 FOR DATA (PACKAGE B). 
p&Giiq 
1. USE CMC-304 TO ASSIGN OR...

) DESCRIPTION 
0 INTERNAL PAGlNG IS ACCOMPLISt-lED BY UTILIZING SPEAKERS ON EKT 
INSTRUMENTS. 
6 PROXIMITY OF EKT INSTRUMENTS TO USERS SERVED WITHIN EACH 
GEOGRAPHIC PAGING ZONE MUST BE CONSIDERED WMEN ESTABLISHING 
PAGING ZONES. 
@ SYSTEM DEFAULT CAPACITY ALLOWS FOR MAXIMUM OF NINE PAGING ZONES 
(GROUPS) WITH UP TO FOUR EKT DIRECTORY MEMBERS ASSIGNED TO EACH 
ZONE. 
1. USE CMC-303 TO ADD OR REMOVE: 
CMC=303 
@ PAGING GROUP (PI) 
@ DIRECTORY NUMBER OF A PAGING GROUP MEMBER (P2) 
I- P1:2 
P2:346 
NOTES:...

1 DESCRIPTION 1 
@ MUSIC-ON-HOLD SERVICE REQUIRES CUSTOMER PROVIDED 600 OHM IMPEDANCE 
MUSIC SERVICE 
PROCEDURE * 
1. USE CMC-250 TO ASSIGN TYPE OF TRUNK. 
2. 
USE CMC-305 TO ASSIGN: 
. EQUIPMENT NUMBER FOR MUSIC SOURCE (PI) 
CMC=305 
P1:182 
L-J 
* ASSUMES TRUNK CARD (4BWC) HAS BEEN SEATED IN APPROPRIATE SLOT AND 
CUSTOMER PROVIDED MUSIC SOURCE HAS BEEN PHYSICALLY CONNECTED TO 
DESIRED SLOT AND CIRCUIT. 
2.107