GE Logiq P5 User Manual

Monitor Display
LOGIQ 5 Basic User Manual 3-51
Direction 2300002-100 Rev. 24.  GE Symbol: Probe Orientation 
Marker. Coincides with a probe 
orientation marking on the probe.15. TGC.
5.  Image Preview. 16.  Body Pattern.
6. Gray/Color Bar. 17. Depth Scale.
7.  Cine Gauge. 18.  Image Management Menu: Menu, 
Delete, and Image Manager.
8.  Measurement Summary Window.  To 
display the Worksheet, move the 
Trackball to “Worksheet” and press 
Set. The Worksheet is displayed. To 
hide the Measurement Summary...

Preparing the System for Use
3-52 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2 

LOGIQ 5 Basic User Manual 4-1
Direction 2300002-100 Rev. 2
Chapter 4
Preparing for an Exam
Describes how to begin an exam. 

Preparing for an Exam
4-2 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Beginning an Exam
Introduction
Begin an exam by entering new patient information.
The operator should enter as much information as possible, 
such as:
• Exam category
• Patient name
• Patient ID
• Exam Information
The patients name and ID number is retained with each 
patients image and transferred with each image during 
archiving or hard copy printing. 
CAUTIONTo avoid patient identification errors, always verify the...

Beginning an Exam
LOGIQ 5 Basic User Manual 4-3
Direction 2300002-100 Rev. 2
Beginning a New Patient 
Pressing the Patient Touch Panel key displays the Patient 
Screen on the monitor. This screen is also accessible from the 
Patient key on the control panel.
 Figure 4-1. Patient Touch Panel
New Patient should be selected at the beginning of each new 
patient exam. Pressing New Patient automatically erases all 
patient data, annotations, measurements, calculations and 
worksheets of the last exam. Images...

Preparing for an Exam
4-4 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Patient Screen
 Figure 4-2. Patient Screen (Category: OB)
3 2 16
5
7
8
4 

Beginning an Exam
LOGIQ 5 Basic User Manual 4-5
Direction 2300002-100 Rev. 2
Patient Screen (continued)
Enter Patient Data with the alphanumeric keyboard.
To navigate through the Patient Entry menu, use the Ta b key or 
Trackball and Set to move and fix the cursor.
Figure 4-2 shows the location of these windows on the Patient 
Screen. The Patient Screen details are:
1. Image Management
•  Patient–New Patient screen (currently selected)
•  Exam History–Exam History screen. 
•  Image History–Image History...

Preparing for an Exam
4-6 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Patient Screen (continued)
5. Patient Information
•  Patient ID Number
•  Patient Name–Last, First and Middle
• Birthdate
•  Age (automatically calculated when birthdate is input)
• Sex
6. Patient Detail
• Patient’s Address
• Telephone Number
• Comments
 Figure 4-3. Detail Window
CAUTIONTo avoid patient identification errors, always verify the 
identification with the patient.  Make sure the correct 
patient identification...

Beginning an Exam
LOGIQ 5 Basic User Manual 4-7
Direction 2300002-100 Rev. 2
Patient Screen (continued)
7. Exam Information
•  Shows the Current/Active Exam information. 
Information pertinent to the selected exam category 
appears in the window. All possible information needs to 
be entered.
•  Detail–Select the Detail box to activate/deactivate the 
exam details. Exam details include Indications, 
Comments, Admission Number, Perf. Physician’s 
Telephone Number, Ref. Physician’s Telephone Number 
and...

Preparing for an Exam
4-8 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Changing Patient Information or an Exam
If patient information needs to be edited, pressing Patient on 
either the Touch Panel or control panel enables the Patient 
Screen for modifying information.
If the exam category needs to be changed, pressing New Exam 
allows modification of the Patient Screen without erasing 
accumulated patient images, measurements, annotations, 
calculations and worksheets.
1.  Display the Patient...