GE Logiq P5 Service Manual

GE HEALTHCARE
DIRECTION 5394141, REVISION  1LOGIQ™ P5 SERVICE MANUAL 
Section 8-3 - Software Loading Procedure 8 - 195
8-7-12               Printer VCR DVD fixture  Top installation - CP900 Printer (cont’d)
4.) Screw 2 screws(2159633, BH M4x8 WHT) on each  sides to fix the color printer with base bracket 
to the color prin ter top bracket.
5.) Connect the USB from the color printer as shown in the figure below.
6.) Connect the cable from the color printer to the system.
 
Figure 8-294   Printer VCR DVD...

GE HEALTHCARE
DIRECTION 5394141, REVISION  1 LOGIQ™ P5 SERVICE MANUAL  
8 - 196 Section 8-3 - Software Loading Procedure
8-7-12               Printer VCR DVD fixture  Top installation - CP900 Printer (cont’d)
7.) Install hide bracket by screwing 3 screws(2159633, BH M4x8 WHT).
8.) Tie the cable properly using the tie wrap. Figure 8-297   Printer VCR DVD Fixture Top installation 

GE HEALTHCARE
DIRECTION 5394141, REVISION  1LOGIQ™ P5 SERVICE MANUAL 
Section 8-3 - Software Loading Procedure 8 - 197
8-7-13 Printer VCR DVD Fixture Top Installation (MD-3000)
8-7-13-1 VCR Remote Port Configuration 1.) LOGIQ™ P5 control the Mitsubishi MD-3000 VCR through USB. Hence the VCR remote control port must be configured as USB
2.) Open the remote control module in the VCR.
3.) Unscrew 2 screws on the VCR remote control po rt panel and out the remote control module from 
VCR. Unscrew 1 screw on...

GE HEALTHCARE
DIRECTION 5394141, REVISION  1 LOGIQ™ P5 SERVICE MANUAL  
8 - 198 Section 8-3 - Software Loading Procedure
8-7-13-1               VCR Remote Port Configuration  (cont’d)
4.) Set the DIP switch on the VCR remote control pane l. The SW 7 in DIP switch should be set to “ON” 
position for the USB remote control.
5.) Insert the remote control module into the VC R and connect the USB cable between the “Remote” 
USB on the console rear panel and USB port of VCR.
6.) Plug the service dongle and...

GE HEALTHCARE
DIRECTION 5394141, REVISION  1LOGIQ™ P5 SERVICE MANUAL 
Section 8-3 - Software Loading Procedure 8 - 199
8-7-13-2 Bracket Installation 1.) Unscrew 2 existing screws from the top cover.
2.) Install Fixture Top bracket on the top cover by screwing 2 screws(2306565, BH M4x16 WHT).
3.) Install VCR recorder to the base bracket  by screwing 4 screws(2159634, BH M4x10 WHT).
 
Figure 8-302   Printer VCR DVD Fixture Top installation
Figure 8-303   Printer VCR DVD Fixture Top installation
 
Figure...

GE HEALTHCARE
DIRECTION 5394141, REVISION  1 LOGIQ™ P5 SERVICE MANUAL  
8 - 200 Section 8-3 - Software Loading Procedure
8-7-13-2              Bracket Installation  (cont’d)
4.) Screw 2 screws(2159633, BH M4x8 WHT) on each  side of the system to fix the VCR recorder with 
base bracket to the VCR top bracket.
5.) Connect the cables (Power Cable, USB cable,  S-VHS Cable, and Sound cables) from the VCR to 
the system. 
6.) Connect the cables to the system on the rear panel.
 
Figure 8-305   Printer VCR DVD...

GE HEALTHCARE
DIRECTION 5394141, REVISION  1LOGIQ™ P5 SERVICE MANUAL 
Section 8-3 - Software Loading Procedure 8 - 201
8-7-13-2              Bracket Installation  (cont’d)
7.) Connect the cables (Power Cable, USB cable,  S-VHS Cable, and Sound cables) from the VCR to 
the system. 
8.) Connect the cables to the system on the rear panel.
9.) Install VCR hide bracket by screwing 3 screws(2159633, BH M4x8 WHT).
 
Figure 8-308   Printer VCR DVD Fixture Top installation
Figure 8-309   Printer VCR DVD Fixture...

GE HEALTHCARE
DIRECTION 5394141, REVISION  1 LOGIQ™ P5 SERVICE MANUAL  
8 - 202 Section 8-3 - Software Loading Procedure
8-7-14 Printer VCR DVD Fixture Top Installation (MD-800)
1.) Unscrew 2 existing screws from the top cover.
2.) Install Fixture DVD bot bracket on the top cover by screwing 2 screws(2327592, FH M4x14 YEL).
3.) Install Fixture Top bracket on the top cover by screwing 4 screws(2373565, FH M4x20).
 
Figure 8-311   Printer VCR DVD Fixture Top installation (LQ MD800) Figure 8-312   Printer...

GE HEALTHCARE
DIRECTION 5394141, REVISION  1LOGIQ™ P5 SERVICE MANUAL 
Section 8-3 - Software Loading Procedure 8 - 203
8-7-14               Printer VCR DVD Fixt ure Top Installation (MD-800) (cont’d)
4.) Install DVD recorder to the base bracket by  screwing 2 screws(2159633, BH M4x8 WHT) on each 
side.
5.) Connect the USB cable and power cable from the DVD to the system.
6.) Connect the cables to the system on the rear panel.
 
Figure 8-314   Printer VCR DVD Fixture Top installation (LQ MD800)
Figure...

GE HEALTHCARE
DIRECTION 5394141, REVISION  1 LOGIQ™ P5 SERVICE MANUAL  
8 - 204 Section 8-3 - Software Loading Procedure
8-7-14               Printer VCR DVD Fixt ure Top Installation (MD-800) (cont’d)
7.) Install DVD hide bracket by screwing 2 screws(2159633, BH M4x8).
Figure 8-317   Printer VCR DVD Fi xture Top installation (LQ MD800)