Home > GE > Medical Equipment > GE Logiq P5 Service Manual

GE Logiq P5 Service Manual

Here you can view all the pages of manual GE Logiq P5 Service Manual. The GE manuals for Medical Equipment are available online for free. You can easily download all the documents as PDF.

Page 171

GE HEALTHCARE
DIRECTION 5394141, REVISION 1LOGIQ™ P5 SERVICE MANUAL
Section 5-4 - Main Board Detail 5 - 29
5-5-2-2 LCDMON control button function
LCDMON assy has four control bu ttons; Lamp Power button, Left button, Menu button, Right button.
Push “Menu” button to select the mode between C ontrast, Brightness, and Dim Brightness mode. Then 
hold down “Left” and “Right” button until the value yo u want is set. The default values are 80% for the 
contrast, 80% for the Brightness, and 50% for the...

Page 172

GE HEALTHCARE
DIRECTION 5394141, REVISION 1LOGIQ™ P5 SERVICE MANUAL
5 - 30Section 5-4 - Main Board Detail
Section 5-6
ARP (Rear Panel)
The LOGIQ™ P5 and LOGIQ™ A5/A5Pro system has the  I/O interfaces for peripherals in rear panel. 
ARP (Arirang Rear Panel) assy has  connectors for peripheral. Composite in/out and S-VHS in/out is for 
the analog video interface for recording and playback  of the VCR or DVD recorder. Audio in/out is for 
audio interface for audio recording and audio playback of the VCR or...

Page 173

GE HEALTHCARE
DIRECTION 5394141, REVISION 1LOGIQ™ P5 SERVICE MANUAL
Section 5-4 - Main Board Detail 5 - 31
5-6-1 Input/Output Signals for peripheral
Table 5-3    Input and Output signals for peripherals
Signal Name Description
Connection from/via/to
Ethernet Standard TCP/IP Ethernet
Syscon -> ARP -> 7P LAN Connector
External VGA VGA signal output for external VGA monitor Syscon -> ARP -> LG Connector -> 15P DSUB 
Connector
Foot Switch Foot Switch is mechanical switch that 
connect a signal to ground Foot...

Page 174

GE HEALTHCARE
DIRECTION 5394141, REVISION 1LOGIQ™ P5 SERVICE MANUAL
5 - 32Section 5-4 - Main Board Detail
Section 5-7
Power Diagrams
5-7-1 Overview
The AC Power assys main tasks are to supply powers the various internal subsystems and to isolate 
electrically the scanner from the on site Mains Power System. The voltage to peripherals can be 
confederated to either 110 VAC or 220 VAC. Internal circuit for AC power have the free voltage 
capability basically but, we should  separate the group using of low...

Page 175

GE HEALTHCARE
DIRECTION 5394141, REVISION 1LOGIQ™ P5 SERVICE MANUAL
Section 5-4 - Main Board Detail 5 - 33
5-7-3 APS/APS Pro (LV Power & HV Power)
NOTE: HVL+ and HVL- are  not available for APS PRO.
DC Powers are supplied by APS and sour ce of all assys in nest and nest fan, etc. To turn on the APS, 
the live power is needed as a  standby power. This live power is  generated from APS when the APS 
receive the AC input from the TRANSBOX. When the  LP(live power) is supplied to the L1SYSCON and 
system...

Page 176

GE HEALTHCARE
DIRECTION 5394141, REVISION 1LOGIQ™ P5 SERVICE MANUAL
5 - 34Section 5-4 - Main Board Detail
5-7-4 AC Power Outlet for Peripheral
The ARP CONN ASSY and ARP CONN 220V ASSY are  the ARP assemblies which interconnect 
external signal and power with the LOGIQ™ P5 s ystem. Both of the assemblies are the same except 
the circuit breakers current ratings depending on vo ltage of the system power source (See Safety 
described below).
5-7-4-1 Safety • Circuit Breaker
• Electrical Isolation
The ARPs...

Page 177

GE HEALTHCARE
DIRECTION 5394141, REVISION 1LOGIQ™ P5 SERVICE MANUAL
Section 5-4 - Main Board Detail 5 - 35
Section 5-8
Cable Connection
5-8-1 Overview
The cable connection can be separated to two group, internal harness and external cable connection 
for peripheral equipment.
5-8-2 Internal Cable 
The black box with white character is the label of  the connector and the adjacent same label connector 
means that the two connectors should be connected each other. The dotted line means optional 
connection...

Page 178

GE HEALTHCARE
DIRECTION 5394141, REVISION 1LOGIQ™ P5 SERVICE MANUAL
5 - 36Section 5-4 - Main Board Detail
5-8-3 Peripherals and Cable connection
A DVD recorder, a Black & White Video Printer and a Color Printer may be installed onboard the 
scanner. These devices are connected to the External I/O (Rear Panel) or Front Panel in the case of B/
W Printer. LOGIQ™ P5 do not support analog printer but digital printer. 
5-8-3-1 Cable Connection - BW printer  Connect the Power cable and USB cable as shown in...

Page 179

GE HEALTHCARE
DIRECTION 5394141, REVISION 1LOGIQ™ P5 SERVICE MANUAL
Section 5-4 - Main Board Detail 5 - 37
5-8-3-2 Cable Connection - Color Printer 
Connect USB cable listed below between the compatible Color Printer like SONY UP-D21MD and the 
console.
Figure 5-35   Cable Connection - Digital Color Printer 

Page 180

GE HEALTHCARE
DIRECTION 5394141, REVISION 1LOGIQ™ P5 SERVICE MANUAL
5 - 38Section 5-4 - Main Board Detail
5-8-3-3 Cable Connection - DVD Recorder 
Connect the cable listed below between  the SONY DVDR and the console.
Figure 5-36   Cable Connection - DVD Recorder
Audio cable with RCA Jack S-Video Cable
S-Video Cable
Audio cable with RCA Jack 
Start reading GE Logiq P5 Service Manual

Related Manuals for GE Logiq P5 Service Manual

All GE manuals