Fujitsu Fi6130 Operators Manual
Here you can view all the pages of manual Fujitsu Fi6130 Operators Manual. The Fujitsu manuals for Scanner are available online for free. You can easily download all the documents as PDF.
Page 61
All Rights Reserved. Copyright 2007 © PFU LIMITED
Page 62
![Page 62
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
Chapter 3 SCANNING VARIOUS TYPES OF DOCUMENTS
This chapter describes how to scan various types of documents, using the\
combination of ScandAll PRO and FUJITSU TWAIN 32
Scanner Driver as an example.
In this chapter, Windows XP screenshots are used as examples.
The screens and operations provided herein may be different from actual \
ones if the operating system you are using is not
Windows XP.
Please...](http://img.usermanuals.tech/thumb/26/59946/w300_fujitsu-fi6130-operators-manual-1488462901_d-61.png "Page 62
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
Chapter 3 SCANNING VARIOUS TYPES OF DOCUMENTS
This chapter describes how to scan various types of documents, using the\
combination of ScandAll PRO and FUJITSU TWAIN 32
Scanner Driver as an example.
In this chapter, Windows XP screenshots are used as examples.
The screens and operations provided herein may be different from actual \
ones if the operating system you are using is not
Windows XP.
Please...")
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP Chapter 3 SCANNING VARIOUS TYPES OF DOCUMENTS This chapter describes how to scan various types of documents, using the\ combination of ScandAll PRO and FUJITSU TWAIN 32 Scanner Driver as an example. In this chapter, Windows XP screenshots are used as examples. The screens and operations provided herein may be different from actual \ ones if the operating system you are using is not Windows XP. Please...
Page 63
![Page 63
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.1 Scanning Both Sides of Documents
1. Place the document on the ADF paper chute.
For details on how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning.
2. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented.
Then, ScandAll PRO starts up.
3. From ScandAll PRO, display the setup...](http://img.usermanuals.tech/thumb/26/59946/w300_fujitsu-fi6130-operators-manual-1488462901_d-62.png "Page 63
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.1 Scanning Both Sides of Documents
1. Place the document on the ADF paper chute.
For details on how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning.
2. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented.
Then, ScandAll PRO starts up.
3. From ScandAll PRO, display the setup...")
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 3.1 Scanning Both Sides of Documents 1. Place the document on the ADF paper chute. For details on how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning. 2. Launch ScandAll PRO. From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented. Then, ScandAll PRO starts up. 3. From ScandAll PRO, display the setup...
Page 64
Scanned document images are displayed in the ScandAll PRO window. All Rights Reserved. Copyright 2007 © PFU LIMITED
Page 65
![Page 65
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.2 Scanning Books [fi-6230 only]
CAUTION
Never look into the light source directly during scanning.
1. Open the document cover.
2. Remove the document cover as shown in the figure below.
3. Read the document on the document bed face down.
4. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented.
Then,...](http://img.usermanuals.tech/thumb/26/59946/w300_fujitsu-fi6130-operators-manual-1488462901_d-64.png "Page 65
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.2 Scanning Books [fi-6230 only]
CAUTION
Never look into the light source directly during scanning.
1. Open the document cover.
2. Remove the document cover as shown in the figure below.
3. Read the document on the document bed face down.
4. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented.
Then,...")
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 3.2 Scanning Books [fi-6230 only] CAUTION Never look into the light source directly during scanning. 1. Open the document cover. 2. Remove the document cover as shown in the figure below. 3. Read the document on the document bed face down. 4. Launch ScandAll PRO. From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented. Then,...
Page 66
![Page 66
For information about how to display the scanner driver’s setup dialo\
g box, see Section 2.6 How to Use ScandAll PRO.
6. Select [Flat Bed] under [Scan Type].
7. Click the [OK] button.
Changes made on this dialog box are saved and the setup dialog box of F\
UJITSU TWAIN 32 closes.
8. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO.
ATTENTION Do not move the document during scanning.
Scanned document images...](http://img.usermanuals.tech/thumb/26/59946/w300_fujitsu-fi6130-operators-manual-1488462901_d-65.png "Page 66
For information about how to display the scanner driver’s setup dialo\
g box, see Section 2.6 How to Use ScandAll PRO.
6. Select [Flat Bed] under [Scan Type].
7. Click the [OK] button.
Changes made on this dialog box are saved and the setup dialog box of F\
UJITSU TWAIN 32 closes.
8. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO.
ATTENTION Do not move the document during scanning.
Scanned document images...")
For information about how to display the scanner driver’s setup dialo\ g box, see Section 2.6 How to Use ScandAll PRO. 6. Select [Flat Bed] under [Scan Type]. 7. Click the [OK] button. Changes made on this dialog box are saved and the setup dialog box of F\ UJITSU TWAIN 32 closes. 8. From the ScandAll PRO window, perform a scan. For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO. ATTENTION Do not move the document during scanning. Scanned document images...
Page 67
![Page 67
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.3 Scanning Large Documents with Flatbed [fi-6230 only]
1. Open the document cover.
2. Remove the document cover as shown in the figure below.
3. Load the document on the document bed face down.
4. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented.
Then, ScandAll PRO starts up.
5. From ScandAll...](http://img.usermanuals.tech/thumb/26/59946/w300_fujitsu-fi6130-operators-manual-1488462901_d-66.png "Page 67
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.3 Scanning Large Documents with Flatbed [fi-6230 only]
1. Open the document cover.
2. Remove the document cover as shown in the figure below.
3. Load the document on the document bed face down.
4. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented.
Then, ScandAll PRO starts up.
5. From ScandAll...")
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 3.3 Scanning Large Documents with Flatbed [fi-6230 only] 1. Open the document cover. 2. Remove the document cover as shown in the figure below. 3. Load the document on the document bed face down. 4. Launch ScandAll PRO. From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented. Then, ScandAll PRO starts up. 5. From ScandAll...
Page 68
![Page 68
6. Select [Flat Bed] under [Scan Type].
7. Click the [OK] button.
Changes made on this dialog box are saved and the setup dialog box of F\
UJITSU TWAIN 32 closes.
8. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO.
ATTENTION Do not move the document during scanning.
Scanned document images are displayed in the ScandAll PRO window.
9. When scanning ends, re-attach and gently close the document...](http://img.usermanuals.tech/thumb/26/59946/w300_fujitsu-fi6130-operators-manual-1488462901_d-67.png "Page 68
6. Select [Flat Bed] under [Scan Type].
7. Click the [OK] button.
Changes made on this dialog box are saved and the setup dialog box of F\
UJITSU TWAIN 32 closes.
8. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO.
ATTENTION Do not move the document during scanning.
Scanned document images are displayed in the ScandAll PRO window.
9. When scanning ends, re-attach and gently close the document...")
6. Select [Flat Bed] under [Scan Type]. 7. Click the [OK] button. Changes made on this dialog box are saved and the setup dialog box of F\ UJITSU TWAIN 32 closes. 8. From the ScandAll PRO window, perform a scan. For information about how to scan documents, see Section 2.6 How to Use ScandAll PRO. ATTENTION Do not move the document during scanning. Scanned document images are displayed in the ScandAll PRO window. 9. When scanning ends, re-attach and gently close the document...
Page 69
![Page 69
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.4 Scanning Documents of Different Widths
When you scan documents of different widths at one time from the ADF, so\
me documents that are small in paper size may
be skewed or may not be fed into the scanner. It is recommended that onl\
y documents of the same width be scanned at one
time.
In the case where you have to scan documents of different widths togethe\
r, scan them, following the procedure...](http://img.usermanuals.tech/thumb/26/59946/w300_fujitsu-fi6130-operators-manual-1488462901_d-68.png "Page 69
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.4 Scanning Documents of Different Widths
When you scan documents of different widths at one time from the ADF, so\
me documents that are small in paper size may
be skewed or may not be fed into the scanner. It is recommended that onl\
y documents of the same width be scanned at one
time.
In the case where you have to scan documents of different widths togethe\
r, scan them, following the procedure...")
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 3.4 Scanning Documents of Different Widths When you scan documents of different widths at one time from the ADF, so\ me documents that are small in paper size may be skewed or may not be fed into the scanner. It is recommended that onl\ y documents of the same width be scanned at one time. In the case where you have to scan documents of different widths togethe\ r, scan them, following the procedure...
Page 70
![Page 70
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.5 Scanning Documents Longer Than A4/Letter Size
1. Load the documents on the ADF paper chute.
For details on loading documents, see Section 2.2 Loading Documents on the ADF for Scanning.
2. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented.
Then, ScandAll PRO starts up.
3. From ScandAll PRO, display the...](http://img.usermanuals.tech/thumb/26/59946/w300_fujitsu-fi6130-operators-manual-1488462901_d-69.png "Page 70
fi-6130 / fi-6230 Image Scanner Operators Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.5 Scanning Documents Longer Than A4/Letter Size
1. Load the documents on the ADF paper chute.
For details on loading documents, see Section 2.2 Loading Documents on the ADF for Scanning.
2. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented.
Then, ScandAll PRO starts up.
3. From ScandAll PRO, display the...")
fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 3.5 Scanning Documents Longer Than A4/Letter Size 1. Load the documents on the ADF paper chute. For details on loading documents, see Section 2.2 Loading Documents on the ADF for Scanning. 2. Launch ScandAll PRO. From the [Start] menu, select [All Programs] Õ [Fujitsu ScandAll PRO] Õ [Fujitsu ScandAll PRO] in the order presented. Then, ScandAll PRO starts up. 3. From ScandAll PRO, display the...
All Fujitsu manuals