Fujitsu Fi6130 Operators Manual

 
  
5.  In the driver setup dialog box, configure settings for scanning.
  
6.  Scan the document.
 
  
7.  Save the scanned document image files.
 
 
 HINT 
l     In this section, screenshots taken in ScandAll PRO are used as examples.\
 
Depending on the application you use, procedures and operations may diff\
er from 
those examples herein.
l     For more information about how to scan documents by using ScandAll PRO, \
see 
Section 
2.6 How to Use ScandAll PRO. 
If you want to use other applications...

fi-6130 / fi-6230 Image Scanner Operators Guide
 
 
 
TROUBLESHOOTING 
CONTENTS MAP 
TOP    
 
 2.5 How to Use the Scanner Drivers
 
 
To scan documents with the scanner, a scanner driver and application sup\
ported by the driver are prerequisites.  
This scanner is accompanied with two drivers; one is a TWAIN-compliant d\
river, FUJITSU TWAIN 32 Scanner Driver, and the 
other is an ISIS-compliant driver, FUJITSU ISIS Scanner Driver, and an a\
pplication named ScandAlll PRO, which supports both 
the...

 
Configure the FUJITSU TWAIN 32 Scanner Driver settings in the dialog box\
 above. 
Major setting items are listed below. 
* For details on each function, refer to FUJITSU TWAIN 32 Scanner Drive\
r Help.
 
Resolution
 
You can specify the resolution for scanning images. 
Default values are selectable from the drop-down list, and a [custom] va\
lue (can be specified in increments of 1 dpi 
from 50 to 600 dpi) can also be selected by clicking a pair of up/down \
buttons. 
By marking the [Predefine]...

 
Black & White Documents are scanned in binary (black and white) mode.
Halftone Documents are scanned through halftone processing in binary (black and \
white) mode.
Grayscale Documents are scanned in gradations from black to white. In this mode, y\
ou can 
select 256 gradations or 4 bits (16 gradations).
Color Documents are scanned in color mode. In this mode, you can select 24 bit\
 Color, 256 
Colors, or 8 Colors.
  
[Scan] Button
 Clicking this button starts scanning documents with the current...

   
 
[Rotation] Tab
  Select this tab when configuring settings for the image rotation, docume\
nt size and skew detection, overscan, hole 
punch removal, and split image.
    
 
[Job/Cache] Tab
  Select this tab when setting cache mode, multifeed detection, blank page\
 skipping, etc.
    
 
[Generic] Tab
  Select this tab to change the unit displayed in the Setting Window for t\
he FUJITSU TWAIN 32 Scanner Driver.  
Select [mm], [inch], or [pixel].
    
 
[Startup] Tab
  Select this tab for...

   
[Config] Button
 Click this button for configuring the Setting Files. 
You can save the changes made to a Setting File. From the next scanning,\
 a set of settings are quickly switched by 
using these Setting Files.
 
 
For details of each function, refer to the FUJITSU TWAIN 32 Scanner Dri\
ver Help.
  
 FUJITSU ISIS Scanner Driver 
  
The FUJITSU ISIS Scanner Driver is a driver software used to scan docume\
nts with a scanner from an ISIS-compliant 
application. 
Usually, you configure settings...

 
You can selects a side or sides to scan. 
The marked checkbox side is targeted for scanning. 
When you mark only the Front Image checkbox, simplex scanning is perform\
ed. When you mark both the Front 
Image and Back Image checkboxes, duplex scanning is performed. 
You can also specify two settings (#1/#2), Color/Grayscale and Binary \
(black-and-white), for each side, and 
output two types of images at a scan (multi-image). 
Settings configured in this dialog box take effect on the selected side \
or...

Halftone
 You can select a halftone pattern. This setting is available when [Black\
 and White] is selected under [Mode]. 
 
Dither Pattern 0This setting is suitable for scanning highly-colored photographs.
Dither Pattern 1 This setting is suitable for scanning highly-colored documents containin\
g 
both text and photographs.
Dither Pattern 2 This setting is suitable for scanning lightly-colored photographs.
Dither Pattern 3 This setting is suitable for scanning lightly-colored documents containi\
ng...

   
Page Orientation
  You can select the page orientation (Portrait or Landscape).
   
 
Page Size
 You can specify the paper size of documents to be scanned. Select a size\
 from the drop-down list. 
You can also specify the width and length of the documents directly by s\
electing Custom in the drop-down list.
   
Split Image 
 You can split a scanned image into two. You can also rotate the split im\
ages by specifying the rotation angle.
   
[Scan Area] Button
 Clicking this button displays the...

  
[Image Processing] Tab
  
Quick Set