Fujitsu Fi6130 Operators Manual

 
 Some image-processing-related settings, which are commonly used, are rea\
dily available. Select a setting 
pattern, and you do not have to configure settings one by one. The follo\
wing setting patterns are available 
(Selectable only when [Black and White] is selected under [Mode]):
 
Normal documents 
(default) This setting pattern is suitable for scanning business documents often 
handled in the office.
Advanced DTC Any types of documents are binarized in good conditions. Even if you 
scan...

  
Pre-pick
 Pre-picking is a function that prepares the next document for scanning, \
feeding it to the position at which the 
scanning starts beforehand. You can specify whether you want to enable P\
re-picking or not from this drop-down 
list.
   
Backing
 You can specify the background color, white or black.
   
Multifeed Detection
 Multifeed refers to an error that occurs when more than one sheet of pap\
er is fed into the ADF at the same time. 
You can specify based on what (overlap or length) a...

  
Pattern
 You can configure gamma corrections. The gamma patterns include: 
Binary (black and white) specified Normal, Soft, Sharp, Custom, Download
Grayscale/24-bit color specified Custom, Download
  
Custom Properties
 You can specify custom properties (Gamma, Brightness, Contrast, Shadow,\
 and Highlight) only when you select 
[Custom] as a Gamma pattern. Type in a numerical value in each box, clic\
k the forward/backward arrows, or drag 
the slider to increase/decrease the numerical value. Of...

  
Color Dropout
 Any of three primary colors (red-green-blue) can be dropped out from d\
ocument images. For example, when 
scanning text in black with the red frame, selecting red color scans onl\
y text in black. 
This setting is available only when Black and White or Grayscale setting\
 is selected.
   
[Compression] Tab 

  
JPEG Quality
 You can specify compression levels and image quality for scanning in Col\
or or Grayscale mode.
   
Sample Ratio 
 You can specify one of the sample ratios, by which images are compressed\
, listed in the order of precedence from 
highest (listed first) to lowest as follows: YUV 4:4:4 < YUV 4:2:2 < Y\
UV 4:1:1. 
The higher the compression rate, the smaller the file size is, but the q\
uality of the scanned image is degraded.
   
[Imprinter] Tab
You can configure settings for using the...

  
[On] Checkbox
 Marking this checkbox enables the Imprinter function.
   
Format Template
 Characters typed in this box are printed on documents. You can enter the\
 following characters (up to 43 
characters):
 
Alphabet A to Z, a to z (single-width)
Numerics 0, 1 to 9 (single-width)
Symbols !  $ # % &  ( ) * + , - . / : ; < = > ? @ [ ] ^ _` { | } ~ (singl\
e-width)
Year/Month/Day %Y
Time (HH:MM) %T
Counter %S (Select from 3 to 8 as the number of digits.)
Other 
  
 ATTENTION 
To print characters #...

 You can specify the rule to display the counter.
 
Initial Value Set the initial value of the counter.
Field Width Select the number of digits from 3 to 8.
Number Control Select the increment of the counter value.
  
Top Margin
 You can set the distance between the top of the page and the top of the \
first line printed on the page with a 
numeric.
 
Range 0.5 to 10.5 in. (1.27 to 26.7 cm)
Minimum unit 0.1 in. (0.01 cm)
  
Units
 You can specify the unit of the top margin; in inch, in cm, or in pixel.\...

fi-6130 / fi-6230 Image Scanner Operators Guide
 
 
 
TROUBLESHOOTING 
CONTENTS MAP 
TOP    
 
 2.6 How to Use ScandAll PRO
 
 
 
 
ScandAll PRO is software for scanning images, which is in conformity wit\
h both TWAN/ISIS standards. Using the FUJITSU 
TWAIN 32 or FUJITSU ISIS scanner driver together with ScandAll PRO allow\
s you to create document images. 
The following explains how to scan documents with the scanner through Sc\
andAll PRO. 
   
 
HINT 
For information about the features of ScandAll...

  
 
   HINT 
l     In ScandAll PRO, the default [Device Driver] is [TWAIN].
l     There is no functional difference between the FUJITSU TWAIN 32 and FUJIT\
SU ISIS 
scanner drivers. You can use one of them according to your preferences.
   
  1.  From the [Tool] menu, select [Preferences].
 
 The [Setup] dialog box appears.
 
 
  2.  On the [Scan] tab, under [Device Driver], select either of drivers. 
 
 To use FUJITSU TWAIN 32 Scanner Driver, select [TWAIN]. 
To use FUJITSU ISIS Scanner Driver, select...

 1.  From the [Scan] menu, select [Select Scanner].
  
  0The [Select Scanner] dialog box appears.
  
  2.  Select a scanner you want to use.
 
 
When the driver is FUJITSU TWAIN 32, select [FUJITSU fi-6130dj] or [FUJI\
TSU fi-6230dj], and then click the 
[Select] button. 
When the driver is FUJITSU ISIS, select [Fujitsu fi-6130] or [Fujitsu fi\
-6230], and then click the [Select] button.
  
 0
 
 FUJITSU TWAIN 32  FUJITSU ISIS
  
How to Display the Scanner Driver Setup Dialog Box
  
 
 
You can...