Fujitsu Fi6130 Operators Manual

  
 
For information about setting items you can configure, see Section 2.5 How to Use the Scanner Drivers.
   
How to Scan Documents
  
 
With ScandAll PRO, you can scan documents with a scanner, in either of t\
wo ways:
   
 
Scan
   You have to configure settings, such as the file format, destination, an\
d scanning parameters, every time you 
scan a document. 
Use [Scan] when you want to scan a small amount of documents as necessar\
y.
 Batch Scan
 
 
You may want to use the same settings...

 
  Or, select the [Scan Settings] button (  ) on the toolbar.
  The [Scan Settings] dialog box appears.
  
 
3.  In the [Scan Settings] dialog box, configure various settings for saving\
 scanned document  images.
  
  
   
[Save to file] Checkbox 

    To save scanned document images immediately after scanning, mark this ch\
eckbox. 
If you want to verify scans before saving them to file, clear this check\
box.
  Folder Name
    You can specify a folder to save scanned document images. 
Type in a full path in the box or click the [Browse] button to select a \
desired folder
  File Name
    
A file name used to save scanned document image files is displayed. 
When you want to use the name rule for file names, mark the [Use the Nam\
e Rule]...

  
 
 
 FUJITSU TWAIN 32 FUJITSU ISIS
  
 
6.  When you finished setting, click the [OK] button in the dialog box (FUJ\
ITSU TWAIN 32  Scanner Driver/ FUJITSU ISIS Scanner Driver).
  0You are returned to the [Scan Settings] dialog box.
  
 
7.  Click the [Scan] button.
 
 
 
   
 
   HINT 
When you use the FUJITSU TWAIN 32 Scanner Driver, clicking the [Scan] bu\
tton may 
display the scanner driver’s setup dialog box. If so, you can also ch\
ange settings in the 
dialog box displayed. 
Click the [Scan]...

  
    
 
 
 HINT 
l     If you do not mark the [Save to file] checkbox in the [Scan Settings] di\
alog box, 
scanned document images are not saved. To save the files, from the [File\
] menu, 
select [Save As].
l     To scan the next document with the same settings, from the [Scan] menu, \
select 
[Scan]. Or, click the [Scan] button0(0
0) on the toolbar. 
   For information about other scanning operations, see Chapter 3 SCANNING VARIOUS TYPES OF DOCUMENTS. 
For more details about the features and...

   The [Batch Scan Setting] dialog box appears.
 
 
 
   
 2.  Do the following as necessary:
  - To create a new profile:
   
Click the [Add] button.
     A new profile appears in the [Profile Editor] dialog box. (Go to step \
3.)
  
- To create a new profile based on an existing profile:
   
Select a profile you want to use as the basis from the profile list, and\
 then click the [Copy] button.
     A new profile based on the selected profile appears in the [Profile Edi\
tor] dialog box. (Go to step...

 
 
 
   
  [General] Tab
   You can type in a profile name and description, and select a profile typ\
e.
  [Scan] Tab
    You can configure settings for a scanner to use. 
Clicking the [Detail Scanner Settings] button displays the setup dialog \
box of the scanner driver.
  [File format and Name scheme] Tab
  
 You can specify various parameters for saving scanned document images.
  [Document separator] Tab
    You can select how to separate documents. 
Each separated document is counted according to...

  You are returned to the [Batch Scan Settings] dialog box. 
Added or copied profiles by using the [Add] or [Copy] button appear in t\
he profile list.
    

 A: From the menu (Method 1)
  
 1.  Place the document on the scanner.
   For information about how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning.
  
 
 2.  From the [Scan] menu, select [Batch Scan Settings].
   The [Batch Scan Settings] dialog box appears.
 
 
 
    
 3.  Select a profile you want to use for...

  
  
 
B: From the menu (Method 2)
  
 1.  Place the document on the scanner.
   For information about how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning.
  
 
 2.  From the [Scan] menu, select [Batch Scan], and then select [a profile na\
me you want to use].
  
   A document is scanned with the scanner, and the scanned document image \
is displayed on the ScandAll PRO 
window, and then the image is saved to file.
  

  
  
 
C: From the toolbar
  
 1.  Place the document on the scanner.
   For information about how to place documents, see Section 2.2 Loading Documents on the ADF for Scanning. 
  
 
 2.  From the [Select the Batch Profile] drop-down list on the toolbar, selec\
t a profile to use.
  
   
 3.  Click the [Start Batch Scan] button ( ) on the toolbar.
  A document is scanned with the scanner, and the scanned document image i\
s displayed on the ScandAll PRO 
window, and then the image is saved to file.