Fujitsu Fi6130 Operators Manual

  HINT 
When a double-sided document is scanned in Duplex mode, the scanned docu\
ment image is 
output according to the [Flip Side Rotation] setting in the order presen\
ted below:
l     Book: Upper half Õ Lower half
l     Fanfold: Lower half Õ Upper half
 
  ATTENTION 
If one of the following settings is set, this function is not available.\
l     Multi Image Output
l     Color/Monochrome Auto Detection
l     The resolution is set to 1200dpi
 
7.  Click the [OK] button.
  You are returned to the...

fi-6130 / fi-6230 Image Scanner Operators Guide
 
 
 
TROUBLESHOOTING 
CONTENTS MAP 
TOP    
 
 3.14 Removing Punch Holes from Images
 
 
You can remove (obscure) punch holes (black dots) from scanned docum\
ent images when scanning punched documents. 
Configure the Hole Punch Removal settings using the scanner driver.  
 
                        Original000000000                Created image
 
The following shows the procedure to change settings in the setup dialog\
 box of the FUJITSU TWAIN 32 Scanner...

  The [Option] dialog box appears.
  
5.  Select the [Rotation] tab.
6.  Select [Automatic Page Size Detection] or [Black Background] from the [A\
utomatic Size and Skew 
detection] drop-down list.
 If you select a setting other than [Automatic Page Size Detection] or [B\
lack Background], [Hole punch removal] is not 
available.
  

 
7.  Select [Fill with white] or [Background color] from the [Hole punch remo\
val] drop-down list.
 Fill with white:Punch hole marks are filled with white
Background color : Punch hole marks are filled with a color most used around the holes.
 When scanning a color document, select [Background color]. If you select\
 [Fill with white], punch holes will be filled 
with white.
 
8.  Click the [OK] button.
 You are returned to the [TWAIN Driver] dialog box.
 
9.  In the [TWAIN Driver] dialog box, click...

fi-6130 / fi-6230 Image Scanner Operators Guide
 
 
 
TROUBLESHOOTING 
CONTENTS MAP 
TOP    
 
 3.15 Scanning by Pressing the Scan Button on the Scanner
 
 
With ScandAll PRO, you can perform batch scan at a press of the button, \
by assigning a Batch Scan profile to the [Scan] or 
[Send to] button. For details of assigning applications to the [Scan] an\
d [Send to] buttons, see 
Appendix 1 Before Using the 
[Scan] and [Send to] buttons.
The following shows the procedure to do so.
 
1.  From the [Start]...

 
The following events can be selected:
l     Scan Button (Press the [Scan] button)
l     Send to 1 to 9 (With a number from 1 to 9 displayed on the Function Num\
ber Display, press the [Send to] 
button)
6.  Select [ScandAll PRO] as the application to launch when an event occurs.\
 
 In Windows XP, select [Start this program] under [Actions], and select a\
n application from the drop-down list on the 
right.
 
  
7.  Click the [OK] button.
  HINT 
To link another button, perform steps 3 to 7 again....

 
  The [Setup] dialog box appears.
 
10.  Select the [Event] tab.
11.  
Click the action of the Event you selected in step 5, and then select a \
profile from the list you want 
to use for scanning.
 
  
 
   HINT 
You have to create profiles beforehand. 
For information about how to create profiles, refer to 
Batch Scan in Section 2.6 How to 
Use ScandAll PRO. 
   
12.  Click the [OK] button.
13.  Exit ScandAll PRO.
 When you press the linked button, ScandAll PRO starts up, and batch scan\
 is...

 
  HINT 
Use the [Send to] button, following the procedure below: 
1.  Press the [Function] button, and change a number displayed on the Functi\
on Number Display.
2.  When the displayed number and the event number you have selected in step\
 5  (Send to 1 - 9) matches, stop pressing the [Function] button.
3.  Press the [Send to] button.   
 
 
 Function Number Display  
 [Function] Button  
 [Send to] Button  
 [Scan] Button  
 
All Rights Reserved. Copyright 2007 © PFU LIMITED 

fi-6130 / fi-6230 Image Scanner Operators Guide
 
 
 
TROUBLESHOOTING 
CONTENTS MAP 
TOP    
 
 3.16 Splitting Documents by Patch Code
 
 
 
ScandAll PRO supports a job separation function with patch code sheets. \
The patchcode-based job separation function can divide 
multiple pages of scanned images into pre-determined unit and save them \
to different folder separetely without interruption. A 
PDF or TIFF (multipage) file can be separated and stored as multiple f\
iles in pre-determined document...

 
  HINT 
l     To suppress scanning the patch code sheet images, check the [Remove sepa\
ration 
sheet] checkbox.
l     In duplex scan mode, you can disable scanning of the rear side of the pa\
tch code 
sheet by selecting the [Remove the next page of a separation sheet] chec\
kbox. 
 
5.  Insert patch code sheets to wherever you want the file/folder to separat\
e.
 
 
6.  Specify the created batch profile, and then perform the batch scan.
  For how to perform the batch scan, see Batch Scan in Section...