Home > Ford > Automobile > Ford F150 2017 Manual

Ford F150 2017 Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Ford F150 2017 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 41 Ford manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 599
    							For additional cabin air filter information,
    or to replace the filter, see an authorized
    dealer.
    REMOTE START (If Equipped)
    You can switch this feature on or off and
    adjust the settings using the information
    display.
    The system adjusts the interior
    temperature depending on your chosen
    settings during remote start.
    You cannot adjust the climate control
    setting during remote start operation.
    When you switch the ignition on, the
    climate control system will return to the
    previous settings.  You can now make
    adjustments.
    You can switch on certain
    vehicle-dependent features when needed,
    such as:
    • Heated seats.
    • Cooled seats.
    • Heated steering wheel.
    • Heated mirrors.
    • Heated rear window.
    Automatic Settings
    In hot weather, the system is set to 
    72°F
    (22°C). The cooled seats are set to high
    (if available, and selected to AUTO in the
    information display).
    In moderate weather, the system either
    heats or cools (based on previous
    settings). The rear defroster, heated
    mirrors and heated or cooled seats do not
    automatically turn on.
    In cold weather, the system is set to 
    72°F
    (22°C). The heated seats are set to high
    (if available, and selected to AUTO in the
    information display). The heated rear
    window and heated mirrors automatically
    turn on.
    148
    F-150 (TFC) Canada/United States of America, enUSA, First Printing Climate Control  
    						
    							SITTING IN THE CORRECT
    POSITION
    WARNINGS
    Sitting improperly, out of position or
    with the seatback reclined too far
    can take weight off the seat cushion
    and affect the decision of the passenger
    sensing system, resulting in serious injury
    or death in the event of a crash. Always sit
    upright against your seat back, with your
    feet on the floor. Do not recline the seatback as this
    can cause the occupant to slide
    under the safety belt, resulting in
    serious injury in the event of a crash. Do not place objects higher than the
    seatback to reduce the risk of serious
    injury in the event of a crash or during
    heavy braking. When you use them properly, the seat,
    head restraint, safety belt and airbags will
    provide optimum protection in the event
    of a crash. We recommend that you follow these
    guidelines:
    •
    Sit in an upright position with the base
    of your spine as far back as possible.
    • Do not recline the seatback more than
    30 degrees.
    • Adjust the head restraint so that the
    top of it is level with the top of your
    head and as far forward as possible.
    Make sure that you remain
    comfortable.
    • Keep sufficient distance between
    yourself and the steering wheel. We
    recommend a minimum of 10 in
    (25 cm) between your breastbone and
    the airbag cover.
    • Hold the steering wheel with your arms
    slightly bent.
    • Bend your legs slightly so that you can
    press the pedals fully.
    • Position the shoulder strap of the
    safety belt over the center of your
    shoulder and position the lap strap
    tightly across your hips.
    Make sure that your driving position is
    comfortable and that you can maintain full
    control of your vehicle.
    HEAD RESTRAINTS WARNINGS
    Fully adjust the head restraint before
    you operate your vehicle. This will
    help minimize the risk of neck injury
    in the event of a crash. Do not adjust the
    head restraint when your vehicle is moving. The head restraint is a safety device.
    Whenever possible it should be
    installed and properly adjusted when
    the seat is occupied. An improperly
    adjusted head restraint may not
    adequately protect an occupant during an
    impact from the rear.
    149
    F-150 (TFC) Canada/United States of America, enUSA, First Printing SeatsE68595   
    						
    							WARNINGS
    Install the head restraint properly to
    help minimize the risk of neck injury
    in the event of a crash.
    Note:
    Adjust the seatback to an upright
    driving position before adjusting the head
    restraint. Adjust the head restraint so that
    the top of it is level with the top of your head
    and as far forward as possible. Make sure
    that you remain comfortable. If you are
    extremely tall, adjust the head restraint to
    its highest position.
    Front Seat Head Restraint Rear Seat Outboard Head Restraints Rear Seat Center Head Restraint
    The head restraints consist of:
    An energy absorbing head
    restraint.
    A
    Two steel stems.
    B
    Guide sleeve adjust and release
    button.
    C
    Guide sleeve unlock and remove
    button.
    D
    Fold button (rear seat outboard
    only).
    E
    Adjusting the Head Restraint
    Raising the Head Restraint
    Pull the head restraint up.
    Lowering the Head Restraint
    1. Press and hold button C.
    2. Push the head restraint down.
    Removing the Head Restraint
    1. Pull up the head restraint until it reaches the highest adjustment
    position.
    2. Press and hold buttons C and D.
    3. Pull up the head restraint.
    150
    F-150 (TFC) Canada/United States of America, enUSA, First Printing SeatsE138642 E166700
    E
    D
    C
    B
    A E166701
    A
    DC
    B   
    						
    							Note:
    For rear seat outboard seats, you can
    fold the head restraint forward for easier
    removal.
    Installing the Head Restraint
    Align the steel stems into the guide sleeves
    and push the head restraint down until it
    locks.
    Folding the Head Restraint
    Note: The rear seat outboard head
    restraints may fold forward for improved
    visibility.
    1. Press and hold button E.
    2. Pull it back up to reset.
    Front Seat Center Head Restraint
    Your vehicle may be equipped with a front
    row center head restraint that you cannot
    adjust or remove.
    Tilting Head Restraints (If Equipped)
    The front head restraints tilt for extra
    comfort. To tilt the head restraint, do the
    following: 1. Adjust the seatback to an upright
    driving or riding position. 2.
    Pivot the head restraint forward toward
    your head to the desired position.
    After the head restraint reaches the
    forward-most tilt position, pivot it forward
    again to release it to the rearward, untilted
    position.
    Note: Do not attempt to force the head
    restraint backward after it is tilted. Instead,
    continue tilting it forward until the head
    restraint releases to the upright position.
    MANUAL SEATS (If Equipped) WARNING
    Do not adjust the driver's seat or
    seatback when your vehicle is
    moving.
    Moving the Seat Backward and
    Forward
    151
    F-150 (TFC) Canada/United States of America, enUSA, First Printing SeatsE144727 E175314   
    						
    							Recline Adjustment
    Manual Lumbar  (If Equipped) The lumbar support control is located on
    the outboard side of the seat. Turn the
    control to adjust your support.
    POWER SEATS
     (If Equipped)
    WARNINGS
    Do not adjust the driver seat or seat
    backrest when your vehicle is
    moving. This may result in sudden
    seat movement, causing the loss of control
    of your vehicle. Do not place cargo or any objects
    behind the seatback before returning
    it to the original position.
    152
    F-150 (TFC) Canada/United States of America, enUSA, First Printing SeatsE175315 E166702   
    						
    							Power Lumbar (If Equipped)
    Multi-Contour Front Seats With
    Active Motion 
     (If Equipped)
    Note: The massage system turns off after
    20 minutes. Note:
    The engine must be running or the
    vehicle must be in accessory mode to
    activate the seats.
    Note: Allow a few seconds for any selection
    to activate. When the seatback and cushion
    are both active, the massage will alternate
    between zones 153
    F-150 (TFC) Canada/United States of America, enUSA, First Printing SeatsE176038 E176039 E156301   
    						
    							Lumbar and bolster mode
    Massage mode
    Upper lumbar
    Back massage intensity
    adjustment
    A
    Lumbar decrease
    Massage intensity decrease
    and off*
    B
    Lower lumbar**
    Cushion massage intensity
    adjustment
    C
    Lumbar increase
    Massage intensity increase
    D
    -
    On and off
    E
    * The massage feature defaults to an
    alternating massage mode with back
    massage intensity adjustment. The lumbar
    and bolster feature defaults to the middle
    lumbar mode.
    ** Press C a second time to adjust the back
    bolster. Press C a third time to adjust the
    cushion bolster.
    You can also adjust this feature through
    the touchscreen. When switched on, the
    system displays directions for you to adjust
    the lumbar settings in your seat or to set
    the massage function. To access and make
    adjustments to the lumbar setting:
    1. Press the Menu Settings icon > Vehicle
    > Multi-contour Seat.
    2. Choose the desired seat to adjust.
    3. Press the + or - to adjust the lumbar intensity.
    To access and make adjustments to the
    massage setting:
    1. Press the Menu Settings icon > Vehicle
    >Multi-contour Seat.
    2. Choose the desired seat to adjust.
    3. Press Off, Low or High. MEMORY FUNCTION (If Equipped) WARNINGS
    Before activating the seat memory,
    make sure that the area immediately
    surrounding the seat is clear of
    obstructions and that all occupants are
    clear of moving parts. Do not use the memory function
    when your vehicle is moving.
    This function automatically recalls the
    position of these features:
    •
    Driver seat.
    • Power mirrors.
    • Optional power steering column.
    • Optional power adjustable pedals.
    The memory control is on the driver door.
    154
    F-150 (TFC) Canada/United States of America, enUSA, First Printing Seats  
    						
    							Saving a PreSet Position
    1. Switch the ignition on.
    2.
    Adjust the seat, exterior mirrors, power
    adjustable pedals and power steering
    column to your desired position.
    3. Press and hold the desired preset button until you hear a single tone.
    Note: A confirmation that you saved a
    memory preset appears in the information
    display.
    You can save up to three preset memory
    positions. You can save a memory preset
    at any time.
    Recalling a PreSet Position
    Press and release the preset button
    associated with your desired driving
    position. The seat, mirrors, pedals and
    steering column move to the position
    stored for that preset.
    Note: You can only recall a preset memory
    position when the ignition is off, or when you
    place the transmission in park (P) or neutral
    (N) if the ignition is on.
    Note: Press any seat or mirror adjustment
    switch (or any memory button) during a
    memory recall to cancel the operation. You can also recall a preset memory
    position by:
    •
    Pressing the unlock button on your
    intelligent access key fob if you linked
    it to a preset position.
    • Unlocking the intelligent driver door
    handle if a linked key fob is present.
    • Entering a personal entry code on the
    Securicode keypad.  See Keyless
    Entry (page 66).
    Note: Using a linked key fob to recall your
    memory position when the ignition is off will
    move the seat and steering column to the
    Easy Entry position.
    Linking a PreSet Position to your
    Remote Control or Intelligent
    Access Key
    Your vehicle can save the preset memory
    positions for up to three remote controls
    or intelligent access (IA) keys.
    1. With the ignition on, move the memory
    features to the position you desire.
    2. Press and hold the desired preset button for about five seconds. A tone
    sounds after about two seconds.
    Continue holding until you hear a
    second tone.
    3. Within three seconds, press the lock button on the remote control you are
    linking.
    To unlink a remote control, follow the
    same procedure – except in Step 3, press
    the unlock button on the remote control.
    Easy Entry and Exit Feature
    If you enable the easy entry and exit
    feature, it automatically moves the driver
    seat position rearward up to two inches
    (five centimeters) when you switch the
    ignition off. The driver seat returns to the
    previous position when you switch the
    ignition on.
    155
    F-150 (TFC) Canada/United States of America, enUSA, First Printing SeatsE142554   
    						
    							You can enable or disable this feature in
    the information display.  See Information
    Displays (page 110).
    REAR SEATS
    Folding Up the Rear Seat Cushion
    The rear seat has a split 60/40 cushion.
    You can flip each seat cushion up into a
    vertical storage position. Rotate the seat cushion up until it locks
    into the vertical storage position.
    Returning the Seat to the Seating
    Position
    WARNING
    Make sure that cargo or any objects
    are not trapped underneath the seat
    cushion before returning the seat
    cushion to its original position, and that the
    seat cushion returns to the full down
    position. Failure to do so may prevent the
    seat from operating properly in the event
    of a crash, which could increase the risk of
    serious injury. Pull the control on the bottom of the seat
    cushion to release the seat cushion from
    the storage position.
    HEATED SEATS
     (If Equipped)
    WARNING
    People who are unable to feel pain
    to their skin because of advanced
    age, chronic illness, diabetes, spinal
    cord injury, medication, alcohol use,
    exhaustion or other physical conditions,
    must exercise care when using the heated
    seat. The heated seat may cause burns
    even at low temperatures, especially if
    used for long periods of time. Do not place
    anything on the seat that insulates against
    heat, such as a blanket or cushion. This
    may cause the heated seat to overheat.
    Do not puncture the seat with pins, needles
    or other pointed objects. This may damage
    the heating element which may cause the
    heated seat to overheat. An overheated
    seat may cause serious personal injury. Do not do the following:
    •
    Place heavy objects on the seat.
    • Operate the heated seat if water or any
    other liquid spills on the seat. Allow the
    seat to dry thoroughly.
    Note: The engine must be running to use
    this feature.
    156
    F-150 (TFC) Canada/United States of America, enUSA, First Printing SeatsE181250 E166704   
    						
    							Press the heated seat symbol to cycle
    through the various heat settings and off.
    More indicator lights indicate warmer
    settings.
    Note:
    The heated seats may remain on
    after you remote start your vehicle, based
    on your remote start settings. The heated
    seats may also turn on when you start your
    vehicle if they were on when you switched
    your vehicle off.
    Rear Heated Seats (If Equipped) WARNING
    People who are unable to feel pain
    to their skin because of advanced
    age, chronic illness, diabetes, spinal
    cord injury, medication, alcohol use,
    exhaustion or other physical conditions,
    must exercise care when using the heated
    seat. The heated seat may cause burns
    even at low temperatures, especially if
    used for long periods of time. Do not place
    anything on the seat that insulates against
    heat, such as a blanket or cushion. This
    may cause the heated seat to overheat.
    Do not puncture the seat with pins, needles
    or other pointed objects. This may damage
    the heating element which may cause the
    heated seat to overheat. An overheated
    seat may cause serious personal injury. Do not do the following:
    •
    Place heavy objects on the seat.
    • Operate the heated seat if water or any
    other liquid spills on the seat. Allow the
    seat to dry thoroughly.
    Note: The engine must be running to use
    this feature.
    The rear seat heat controls are on the rear
    of the center console. Press the heated seat symbol to cycle
    through the various heat settings and off.
    More indicator lights indicate warmer
    settings.
    The heated seat module resets at every
    ignition run cycle. While the ignition is in
    the on position, press the heated seat
    switch to enable heating mode. When
    activated, they turn off automatically when
    you switch off the engine.
    CLIMATE CONTROLLED SEATS
    (If Equipped)
    Heated Seats
    157
    F-150 (TFC) Canada/United States of America, enUSA, First Printing SeatsE146322 E146322   
    						
    All Ford manuals Comments (0)

    Related Manuals for Ford F150 2017 Manual