Epson Tmj 7100 Manual

							TM-J7000/J7100
User’s Manual / Bedienungsanleitung 
Gebruikershandleiding / Manuel d’utilisation  
Manual do utilizador / Manual del usuario  
Manuale dell’utente
402532400 
						

							 
2
43 1A
TM-J7000 TM-J7100
B5
7 8 9 11 12656
7 8 9 11 12 10
C 
						

							D
E
F 
						

							G
H
I
TM-J7000 TM-J7100 
						

							J
K
TM-J7000 TM-J7100
L 
						

							DIP Switch Tables
TM-J7000/J7100 Specifications
Serial
SW Function On Off
1 Reserved — Fixed to 
Off
2 Interface condition 
selectionBy the DIP 
switchBy the 
memory 
switch
3 Handshaking XON/XOFF DTR/DSR
4 Word length 7 bits 8 bits
5 Parity check Yes No
6 Parity selection Even Odd
7
8Transmission speed selection (See Serial 
transmission speed table.)
Serial transmission speed
1-7 1-8 Transmission speed
On On 9600 bps
Off On 19200 bps
On Off 38400 bps
Off Off 115200 bps
Parallel
SW Function On Off
1-8 Reserved Fixed to Off.
Receipt Slip Endorsement
Print method
Serial inkjet Dot Matrix Method
Print density
180 × 180 dpi 
Print font  Font (standard)
Font A: 12 × 24, Font B: 9 × 17
Column capacity 
(columns)82.5 mm: 42/56
76 mm: 40/53
69.5 mm: 36/48
57.5 mm: 30/4048/64 46/61
Character size (W 
× H) 
(standard)1.41 × 3.384 mm/0.987 × 2.397 mm (not including 
horizontal spacing)
Character set
95 Alphanumeric, 37 International,128 × 11 Graphic
Characters per inch 
(standard)Font A (12 × 24): 15 cpi, Font B (9 × 17): 20 cpi
Paper Dimensions (mm)
57.5 ± 0.5, 69.5 ± 0.5,
76 ± 0.5, 82.5 ± 0.568~230 (W) ×
68~297 (L)
(min. 68 ×152)68~101.6 (W) ×
150~223 (L)
Thickness (mm)
0.06~0.09 0.09~0.2 0.09~0.13
Print speed
(Paper width 76 mm) 
(Economy, High 
speed mode)Character
14.3 lps
Graphic
43 mm/s
Bar code
UPC-A, UPC-E, JAN13(EAN), JAN8(EAN), CODE39, 
CODE93, CODE128, ITF, CODABAR(NW7), PDF417
Interface
RS-232 or Bidirectional parallel
Cash Drawer & Customer Display port
(EPSON DM-D series)
Dealer option: RS-485, USB, 10Base-T I/F 
						

							dpi: dots per 25.4 mm (dots per inch) 
lps: lines per second
lpi: lines per 25.4 mm (lines per inch)Data buffer Receive buffer
4 KB
User defined buffer
12 KB
User NV memory
384 KB (Max.)
Ink cartridge Color
Single color: Black SJIC8(K) (for TM-J7000 only)
Two color: Black SJIC6(K), Red SJIC7(R), 
Blue SJIC7(B), Green SJIC7(G)
Life
Single color: Approx. 20 million characters
Two color: Approx. 15 million characters 
Power
24 VDC ± 10%
Power consumption Printing
Approx. 1 A
Stand-by
Approx. 50 mA
D.K.D. function
2drives
Reliability MTBF
180,000 hours
MCBF
50,000,000 lines
Temperature/
humidityPrinting
10~35°C {50~95°F} 20~80% RH 
Must be no condensation
Operating
5~40°C {41~104°F} 20~80% RH 
Must be no condensation
Storage
Ink installed: –20~40°C {–4~104°F} 20~85% RH 
Ink not installed: –20~60°C {–4~140°F} 5~85% RH 
Must be no condensation
Overall dimensions (mm)
195 × 237 × 188 (W × D × H)
Mass (approx.)
4.4 kg Receipt Slip Endorsement 
						

							English
TM-J7000/J7100
User’s Manual
DIP Switches and SpecificationsThe technical specifications and the information about the DIP switches are at the beginning of this 
manual.
IllustrationsAll of the illustrations are at the beginning of this manual. They are identified by letters (A, B, C . . .). 
In the text the illustrations are referred to by these letters. (“See illustration A,” for example.) Some of 
these illustrations have numbered arrows or lines pointing to parts of the illustration. See the list 
below for the meaning of the numbers.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or 
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or 
otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is 
assumed with respect to the use of the information contained herein. While every precaution has been 
taken in the preparation of this book, Seiko Epson Corporation assumes no responsibility for errors or 
omissions. Neither is any liability assumed for damages resulting from the use of the information 
contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or 
third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result 
of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to 
this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s 
operating and maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of 
any options or any consumable products other than those designated as Original EPSON Products or 
EPSON Approved Products by Seiko Epson Corporation.
EPSON and ESC/POS are registered trademarks of Seiko Epson Corporation.
NOTICE: The contents of this manual are subject to change without notice.
Copyright © 2002 by Seiko Epson Corporation, Nagano, Japan.
Illustration A Illustration B
1.
Roll paper cover5.
PAPER FEED9.
INK OUT (Black) 
2.
Ink cartridge cover6.
CLEANING10.
INK OUT (Color) 
3.
Control panel7.
PAPER OUT11.
ERROR 
4.
Power supply switch8.
CUT SHEET12.
POWER 
						

							2   TM-J7000/J7100 User’s Manual
English
EMC and Safety Standards Applied
Product Name:  TM-J7000/TM-J7100
Model Name:   M184A
The following standards are applied only to the 
printers that are so labeled. (EMC is tested using 
the EPSON power supplies.) 
Europe: CE marking
Safety: TÜV (EN 60950)
North America: EMI:  FCC/ICES-003 Class A
Safety:  UL 60950/CSA C22.2 
No. 60950
Japan: EMI: VCCI Class A
Oceania:  EMC:  AS/NZS 3548 Class B
WARNINGThe connection of a non-shielded printer 
interface cable to this printer will invalidate the 
EMC standards of this device.
You are cautioned that changes or modifications 
not expressly approved by Seiko Epson 
Corporation could void your authority to 
operate the equipment.
CE MarkingThe printer conforms to the following Directives 
and Norms:
Directive 89/336/EEC EN 55022 Class B
EN 55024 
IEC 61000-4-2 
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
FCC Compliance Statement 
For American Users
This equipment has been tested and found to 
comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable 
protection against harmful interference when 
the equipment is operated in a commercial 
environment.
This equipment generates, uses, and can radiate 
radio frequency energy and, if not installed and 
used in accordance with the instruction manual, 
may cause harmful interference to radio 
communications. 
Operation of this equipment in a residential area 
is likely to cause harmful interference, in which 
case the user will be required to correct the 
interference at his own expense.
FOR CANADIAN USERSThis Class A digital apparatus complies with 
Canadian ICES-003.
Important Safety Information
This section presents important information intended to ensure 
safe and effective use of this product. Read this section carefully 
and store it in an accessible location.
Key to Symbols
The symbols in this manual are identified by their level of 
importance, as defined below. Read the following carefully before 
handling the product.
WARNING:
Warnings must be followed carefully to avoid serious bodily injury.