Digital Projection Titan Sx+-500 User Manual

Rev B          02/2007        page 4.39
Digital Projection TITAN sx+-500 User Manual 4. Controlling the projector
Notes
Setup Menu
Communication
When fresh batteries are
inserted in the remote control, it
will default to address 00.
Remote control 00 is a master
control,  able to control all
projectors.
If two or more projectors are set
to the same address, they can
be controlled from one remote
control, provided they are
connected by cable or in range
of the infra red.
Communication
•Press  and   to...

Rev B          02/2007         page 4.40
4. Controlling the projectorDigital Projection TITAN sx+-500 User Manual
Notes
Setup Menu
Network
Some items may be greyed out
or not editable, due to the effect
of other settings made in the
Network submenu.
For example, if a Wired
Connection is selected:
Wifi, Channel and SSID will be
unavailable.
Setup menu continued
Network
•Press  and   to select Network.
Press 
 to open the Network submenu.
LAN MAC Address
•Projector’s unique ID  - for information only -...

Rev B          02/2007        page 4.41
Digital Projection TITAN sx+-500 User Manual 4. Controlling the projector
Notes
LAN IP  Address cannot be
changed if DHCP is set to ON.
DHCP will set the the address,
which will be displayed for
information only.
Setup menu, Network continued
DHCP
•Press  and   to select DHCP
Press 
 to open the DHCP control box.
Press 
 and   to select from:
On
Off
Press  
 to apply the new DHCP setting.
LAN IP Address
•Press  and   to select LAN IP Address
Press 
 to open the LAN...

Rev B          02/2007         page 4.42
4. Controlling the projectorDigital Projection TITAN sx+-500 User Manual
Notes
LAN IP Subnet cannot be
changed if DHCP is set to ON.
DHCP will set the the subnet
mask, which will be displayed
for information only.
LAN Subnet Mask
•Press  and   to select LAN Subnet
Press 
 to open the LAN Subnet control box.
Press 
 and   to select from:
Automatic
or one of the following:
Class C Masks
255.255.255.254
255.255.255.252
255.255.255.248
255.255.255.240
255.255.255.224...

Rev B          02/2007        page 4.43
Digital Projection TITAN sx+-500 User Manual 4. Controlling the projector
LAN Gateway Mask
•Press  and   to select LAN Gateway
Press 
 to open the LAN IP Address control box.
Use 
 and   to select each number in turn.
Use 
 and   to adjust the number
then move to the next number.
Use 
 and   to select from
Apply
Cancel
Press  
 to apply the new LAN Gateway Mask, or to exit without making the
change.
Setup menu, Network continuedNotes
LAN IP Gateway cannot be...

Rev B          02/2007         page 4.44
4. Controlling the projectorDigital Projection TITAN sx+-500 User Manual
Channel
•Press  and   to select Channel.
Press 
 to open the Channel control box.
Press 
 and   to select the channel number.
Use 
 and   to adjust the channel number from:
0 to 14
Use 
 and   to select from
Apply
Press  
 to apply the new Channel number.
or Cancel
Press 
  or  to exit without making the change.
SSID
•Projector’s ID  - for information only.
Setup menu, Network continuedNotes...

Rev B          02/2007        page 4.45
Digital Projection TITAN sx+-500 User Manual 4. Controlling the projector
Notes
Restore Defaults will restore
all settings to factory
defaults.
If you are not sure this is
what you want to do, then
either:
make a record of all settings
first
or
select No, then press 
.
Following a restore to factory
defaults, the projector will
perform a self-test and enter
Standby mode.
This process will take up to 10
seconds. During this time the
projector will not respond to...

Rev B          02/2007         page 4.46
4. Controlling the projectorDigital Projection TITAN sx+-500 User Manual
Notes
When using the menus, press
OSD 
 or  to hide or
reveal the On-Screen-Display.
Information Menu
Information Menu
Projector Information
Information Menu
Source Information
Infor mation menu
To return to the main menu, press  up to three times.
From the main menu:
•Press 
 and   until Information is highlighted.
Press 
 to open the Information menu. The blue highlight moves to the first...

Rev B          02/2007        page 4.47
Digital Projection TITAN sx+-500 User Manual 4. Controlling the projector
Digital Projection Information
•Press  and   to select Digital Projection.
Press 
 to see the DP Information screen.
Information menu continuedNotes
When using the menus, press
OSD 
 or  to hide or
reveal the On-Screen-Display.
Information Menu
DP Contact Information 

Rev B          02/2007         page 4.48
4. Controlling the projectorDigital Projection TITAN sx+-500 User Manual