Digital Projection Titan Sx+-500 User Manual

Rev B          02/2007
5. Userware
Contents
5. Userware5.1 

Rev B          02/2007         page 5.2
5. UserwareDigital Projection TITAN  User Manual 

Rev B          02/2007
6. Maintenance
Contents
6. Maintenance6.1
Changing the lamp .................................................................................................................. 6.2
Changing the air filter ............................................................................................................. 6.3
Cleaning................................................................................................................................... 6.4
Projector...

Rev B          02/2007         page 6.2
6. MaintenanceDigital Projection TITAN sx+-500 User Manual
Changing the lamp
• Turn the power OFF and allow the lamp to cool for 5 minutes.
• Unscrew the three door screws, and detach the rear door - the door is tethered,
so cannot be removed completely.
• Disconnect the timer cable from the lamp module.
• Loosen the two captive finger screws securing the lamp module.
• Pull the lamp module to the right, then to the rear to remove it from the projector.
• Insert a...

Rev B          02/2007         page 6.3
Digital Projection TITAN sx+-500 User Manual6. Maintenance
Changing the air filter
• Turn the power OFF and allow the lamp to cool for 5 minutes.
• Unscrew the three door screws, and remove the rear door.
• Pull out the air filter.
• Fit a new air filter.
• Re-fit the rear door, making sure that the door tether is not trapped, and tighten
the three screws.
Notes
Always allow the lamp to cool
for 5 minutes before:
- disconnecting the power
- moving the projector
-...

Rev B          02/2007         page 6.4
6. MaintenanceDigital Projection TITAN sx+-500 User Manual
Notes
Never use strong detergents
or solvents such as alcohol
or thinners to clean the
projector and lens.
NEVER touch the lamp or
reflector.
Cleaning
Turn the projector off before cleaning.
Projector
Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild
detergent.
Lens
Use a blower or lens paper to clean the lens, t aking care not to scratch the glass.
Lamp module
Use a blower or...

Rev B          02/2007
7. Appendix
Contents
7. Appendix7.1
Troubleshooting...................................................................................................................... 7.2
Specifications.......................................................................................................................... 7.4
Part numbers................................................................................................................................................... 7.4
Optical...

Rev B          02/2007         page 7.2
7. Appendix Digital Projection TITAN sx+-500 User Manual
Troubleshooting
Problem
The projector will not power up.
The projector shuts down after it has
been in use for some time.
No image is displayed.
The image does not fit the screen
correctly.
Uneven image quality.
Possible solutions
Check that the mains plug is plugged in and that the mains supply is switched on.
Check any external fuses or breakers.
The projector may be overheating. Check that the air inlets...

Rev B          02/2007         page 7.3
Digital Projection TITAN sx+-500 User Manual 7. Appendix
Problem Possible solutions
Projector does not respond to control
commands from a computer.
Projector does not respond to control
commands from the remote control.Check that the LAN or serial cable is connected correctly.
See this section 7. Appendix, Connections
If using a LAN, check that the address setting is made correctly.
See Section 4. Controlling the projector, Network menu
If using a serial cable,...

Rev B          02/2007         page 7.4
7. Appendix Digital Projection TITAN sx+-500 User Manual
Specifications
Part numbers
Projector 105-925
Rigging frame 104-923
Power cable 10A, Europe 102-163
Power cable 13A, North America 102-165
Power cable 10A, United Kingdom 102-180
Remote control 105-023
4x AAA  batteries 105-922
Remote cable 5m 102-162
User manual on CD 105-923C
Important Information 105-924B
Replacement parts
Lamp module 001-742
Air filter 102-064
Lenses
0.73 : 1 fixed lens 105-607
1.2 : 1 (3...