Digital Projection Titan 1080p-600, Reference 1080p, Titan 1080p-700, 1080p Ultra Contrast User Manual

Rev C August 2009 Page 4.25
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual  4. Controlling the projector

Notes
 Some  menu controls can be 
accessed directly using the 
control keys (see earlier in this 
section).
 When using the menus, press 
OSD  or  to hide or 
reveal the On-Screen-Display.
 
Geometry Menu
 Some menu items may be 
greyed out - unavailable due to 
the effect of settings made in 
other menus, or due to the type 
of input signal.
 Aspect Ratio selection...

Page 4.26  Rev C August 2009
4. Controlling the projector Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Notes
 Horizontal and Vertical 
Aspect Ratio adjustments are 
available only when User is 
selected in Aspect Ratio, (see 
previous page).
 Keystone adjustment can be 
found in both the Geometry and 
Projector Setup menus.
 Phase adjustment can be 
found in both the Picture and 
Geometry menus, and is 
available for graphics based 
RGB sources only.
User Horizontal...

Rev C August 2009 Page 4.27
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual  4. Controlling the projector

Notes
 
Geometry Menu 
  Resolution
 Input Detection should 
normally be set to Automatic. 
However, if the incoming video 
signal is non-standard, the 
projector may not be able to 
select an appropriate input 
mode.
  In this case, 
Input Detection 
should be set to Manual or 
Custom.
 Input Standard is available 
only if Input Detection is set to 
Manual....

Page 4.28  Rev C August 2009
4. Controlling the projector Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

When Input Detection is set to Custom:
Press  and   to select one of the adjustment sliders.
  Press 
 and   to adjust the slider to match the resolution of the incoming 
video signal.
Blanking
Blanking curtains can be applied to each edge of the picture.
Press  and   to select Blanking.
  Press 
 to open the Blanking submenu.
Blanking On/Off
 Press  and   to select...

Rev C August 2009 Page 4.29
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual  4. Controlling the projector

Notes
 When using the menus, press 
OSD  or  to hide or 
reveal the On-Screen-Display.
 
Colour Menu
 Some menu items may be 
greyed out - unavailable due to 
the effect of settings made in 
other menus, or due to the type 
of input signal.
 Read these notes on Colour 
and Global Colourimetry 
before making any settings in 
the Colour menus.
  Note that any changes...

Page 4.30  Rev C August 2009
4. Controlling the projector Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Notes
 Read the notes on Colour and 
Global Colourimetry earlier 
in this section before making 
any settings in the Colour 
menus.
  Note that any changes made 
in the Global Colourimetry 
menu (see Setup Menu, later 
in this section) will affect ALL 
inputs, modes and presets for 
which Global Mode has been 
selected in the Colour menu.
 The Colour Temperature...

Rev C August 2009 Page 4.31
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual  4. Controlling the projector

Notes
 The Trim submenu is available  
only if Global Colour Mode is 
selected.
 
Colour Menu 
  Trim
 Read the notes on Colour and 
Global Colourimetry earlier 
in this section before making 
any settings in the Colour 
menus.
Trim
Press  and   to select Trim.
  Press 
 to open the Trim submenu.
Trim rGB Lift and Gain
Press  and   to select the parameter to be...

Page 4.32  Rev C August 2009
4. Controlling the projector Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Notes
 When using the menus, press 
OSD  or  to hide or 
reveal the On-Screen-Display.
 
Setup Menu
Setup menu
 To return to the main menu, press  up to three times.
 From the main menu:
Press  and   until Setup is highlighted.
Press  to open the Setup menu. The blue highlight moves to the first item in 
the menu.
• 

Rev C August 2009 Page 4.33
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual  4. Controlling the projector

Projector
Press  and   to select Projector.
  Press 
 to open the Projector submenu.
Orientation
Press  and   to select Orientation.
  Press 
 and   to select from:
Desktop Front
Desktop Rear
Ceiling Front
Ceiling Rear
Control panel Backlight
Press  and   to select Backlight.
  Press 
 and   to select from:
On
Off
Component Video Sync
Press  and   to select Component...

Page 4.34  Rev C August 2009
4. Controlling the projector Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Keystone
Used to correct for distortion caused by the projector being mounted higher or lower 
than the screen.
Press  and   to select Keystone.
  Press 
 and   to adjust the slider (-128 to +127).
Lens Calibration
Calibrate Focus
Press  and   to select Calibrate Focus.
  Press 
.
The focus mechanism will operate for about a minute, whilst the minimum and 
maximum...