Digital Projection Titan 1080p-600, Reference 1080p, Titan 1080p-700, 1080p Ultra Contrast User Manual

Rev C August 2009 Page 1.5
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual   1. Introduction

Side panel – connection and controlNotes
 For information about how 
to connect the projector, see 
Connecting the projector in 
section 2. Installation, and 
Connections in section 7. 
Appendix.
 For information about how 
to use the control panel, see 
section 4. Controlling the 
projector.
 For information about how to 
mount and stack projectors, see 
section 2. Installation....

Page 1.6  Rev C August 2009
1. Introduction Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual 

Rev C August 2009  Page 2.1
2. Installation
Contents
Screen requirements .........................................................................................................................2.2
Aspect ratio ......................................................................................................................................2.2
Fitting the image to the DMD .............................................................................................................2.2
Images displayed...

Page 2.2  Rev C August 2009
2. Installation  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Screen requirements
Aspect ratio
Fitting the image to the DMD
If the source image supplied to the projector is smaller than 192 0 x 1080 pixels, 
then the image will not fill the DMD. The following example shows how a number 
of common formats may be displayed.
Images displayed full width
Images displayed full height
Notes
 The images are shown here 
scaled automatically by the...

Rev C August 2009 Page 2.3
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual   2. Installation

 Diagonal screen sizes
Screen sizes are sometimes specified by their diagonal size (D) in inches. When 
dealing with large screens and projection distances at different aspect ratios, it is 
more convenient to measure screen width (W) and height (H).
The example calculations below show how to convert diagonal sizes in inches into 
width and height, at various aspect ratios.
2.35:1...

Page 2.4  Rev C August 2009
2. Installation  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Fitting the image to the screen
It is important that your screen is of sufficient height and width to display images at 
all the aspect ratios you are planning to use.
Use the conversion chart, or the sample calculations below to check that you are 
able to display the full image on your screen. If you have insufficient height or width, 
you will have to reduce the overall image...

Rev C August 2009 Page 2.5
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual   2. Installation

Positioning the screen and projector
For optimum viewing, the screen should be a flat surface perpendicular to the floor . 
The bottom of the screen should be 1.2m (4 feet) above the floor and the front row 
of the audience should not have to look up more than 30° to see the top of the 
screen.
The distance between the front row of the audience and the screen should be at 
least...

Page 2.6  Rev C August 2009
2. Installation  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Notes
 The High Brightness lenses 
are recommended for the 
1080p-600 and 1080p-700, for 
maximum light output.
  The High Contrast lenses 
are recommended for the 
Reference 1080p and 1080p 
Ultra Contrast, for maximum 
contrast.
 Each time a new lens is 
fitted	to	the	projector,	
the calibration procedure 
must be carried out. See 
Setup menu, in Section 4. 
Controlling the...

Rev C August 2009 Page 2.7
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual   2. Installation

Notes
 This chart has a TRF of 1.0, for 
use with the following images:
Choosing a lens using the lens charts
Use the charts on this page and on the following pages to choose which lens best 
suits your application.
Full width images, including 2.35:1, 1.85:1 and 16:9 (native resolution\
)
example
For a screen width of 10m at a distance of 30m, the 2.56- 4.16: 1 zoom lens 
would be...

Page 2.8  Rev C August 2009
2. Installation  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Notes
 This chart has a TRF of 1.07, 
for use with the following 
images:
1.66:1 (Vista)
Lens charts continued
Full height image 1.66:1 (Vista)
Use the chart below to choose which lens best suits your application.
if you need to be more precise, then use the calculations on the page immediately 
following the lens charts.
feetmetres
Screen width
              10             20...