Digital Projection Titan 1080p-600, Reference 1080p, Titan 1080p-700, 1080p Ultra Contrast User Manual

Rev C August 2009 Page 5.3
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual   5. Userware

Notes
 To use the Titan Userware the 
java Runtime Environment
 
software must be installed on 
your browser. This software can 
be downloaded, free of charge 
from www.java.com.
  The LAN IP Address of the 
projector can be found in the 
Network submenu of the Setup 
menu, as described in section 
4. Controlling the projector
.
 Whenever the projector is 
connected to mains power,...

Page 5.4  Rev C August 2009
5. Userware  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Standalone version
To install the Userware, simply copy the file (from the CD, or downloaded from 
the Digital Projection website), to a folder on the computer.
Double click on the filename to start the software.
The Userware interface is organised into a number of pages, as listed below:
Show  Lens        Image   Screen
MCGD  TCGD        Global   Modal
info        System   Discover...

Rev C August 2009 Page 5.5
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual   5. Userware

Show page
The Show page is the first to display when the browser connects to the projector .
To return to the Show page at any time, click on Show.
On / Off
Click On to switch the projector On.
Click Off to switch the projector into Standby mode.
Shutter Open / Closed
Click on Shutter O to open the shutter.
Click on Shutter C to close the shutter.
Freeze / Un-Freeze
Click on Freeze to...

Page 5.6  Rev C August 2009
5. Userware  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Input Presets
recall
To recall a set of modal settings that have been saved:
Click on Preset, and select one of the Presets A - S, from the drop down menu.
Click on Recall.
  The projector will switch to the saved input source, and redetect  the input mode 
before applying the saved modal settings.
Save
To save the current input source, mode and modal settings:
Click on Preset, and...

Rev C August 2009 Page 5.7
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual   5. Userware

Orientation
Click on Orientation to select one of the following from the drop down menu:
Desktop Front
Ceiling Front
Desktop Rear
Ceiling Rear
Input
Click on Input to select one of the following from the drop down menu:
RGB1
RGB2
DVI
SDI
Composite Video
S-Video
Component
•
•
Notes
 For more information about 
input modes, see Input modes 
and settings, in section 
4. Controlling the...

Page 5.8  Rev C August 2009
5. Userware  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Test Pattern
Click on Test Pattern to select from the drop down menu:
Aspect Ratio
Click on Aspect Ratio to select from the drop down menu.
•
•
Show page continuedNotes
 For more information about 
test patterns, see Setup menu, 
in section  4. Controlling the 
Projector.
 For more information about 
aspect ratios, see Picture 
menu and Geometry menu, 
in section  4. Controlling the...

Rev C August 2009 Page 5.9
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual   5. Userware

NotesLens page
To see the Lens page, click on Lens.
Lens controls
Click on the buttons to Move, Focus and Zoom the lens.
Click on Stop All Lens Movement to abort any unwanted lens control 
movement.
Shutter Open / Closed
Click on Shutter Open to open the shutter.
Click on Shutter Close to close the shutter.
•
•
•
•
•
Lens 
controls 

Page 5.10  Rev C August 2009
5. Userware  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Notes
 The Component selection is 
available for the Component 
input only.
 For more information about 
phase, see Picture menu and 
Geometry menu, in section 
4. Controlling the Projector
.
  The Phase slider is available for 
RGB1 and RGB2 inputs only.
Image page
To see the Image page, click on Image.
Component
Click on Component to select one of the following from the drop down...

Rev C August 2009 Page 5.11
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual   5. Userware

Notes
Colour Space
Click on Colour Space to select one of the following from the drop down menu:
RGB
SMPTE240 YPrPb
REC709 YPrPb
REC601 YPrPb
SMPTE240 YCrCb
REC709 YCrCb
REC601 YCrCb
•
Image page continued
Colour 
Space 

Page 5.12  Rev C August 2009
5. Userware  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Notes
 For more information about 
Gamma, see Picture menu, 
in section  4. Controlling the 
Projector.
 User download of Gamma 
correction tables is not yet 
available.
 The Parametric slider is 
available only when Parametric 
is selected in Gamma 
Correction.
Gamma
Click on Gamma Correction to select from the drop down menu:
Parametric slider
Use the slider to adjust the Gamma...