Digital Projection Titan 1080p-600, Reference 1080p, Titan 1080p-700, 1080p Ultra Contrast User Manual

Rev C August 2009 Page 4.45
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual  4. Controlling the projector

Notes
 Subnet cannot be changed if 
DHCP is set to ON.
  DHCP will set the the subnet 
mask, which will be displayed 
for information only.
Subnet Mask
Press  and   to select Subnet
  Press 
 to open the Subnet control box.
  Press 
 and   to select from:
Automatic
or one of the following:
Class C Masks
255.255.255.254 
255.255.255.252 
255.255.255.248 
255.255.255.240...

Page 4.46  Rev C August 2009
4. Controlling the projector Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Gateway Mask
Press  and   to select Gateway
Press  to open the Gateway control box.
Use  and   to select each number in turn.
Use  and   to adjust the number
then move to the next number.
Use  and   to select from
Apply
Cancel
Press   to apply the new Gateway Mask, or to exit without making the 
change.
•
Setup menu, Network continuedNotes
 Gateway cannot be changed if...

Rev C August 2009 Page 4.47
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual  4. Controlling the projector

Wifi Channel
Press  and   to select Wifi Channel.
  Press 
 to open the Wifi Channel control box.
  Press 
 and   to select the channel number.
  Use 
 and   to adjust the channel number from:
0 to 14
 Use 
 and   to select from
 Apply
 Press  
 to apply the new Wifi Channel number.
or  Cancel
Press   or   to exit without making the change.
SSID
Projector’s ID  - for...

Page 4.48  Rev C August 2009
4. Controlling the projector Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Notes
 Restore Defaults will restore 
all settings to factory 
defaults. All ISF settings will 
be lost (see next page).
  If you are not sure this is 
what you want to do, then 
either:
 make a record of all settings 
first 
 
or 
select No, then press .
 Following a restore to factory 
defaults, the projector will 
perform a self-test and enter 
Standby mode.
  This...

Rev C August 2009 Page 4.49
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual  4. Controlling the projector

Notes
 When using the menus, press 
OSD  or  to hide or 
reveal the On-Screen-Display.
 
Information Menu
 If Distributed By is visible, then 
the installer is  ISF	Certified, 
and the Save and Delete 
Preset options will not be 
available. Contact the installer 
for more information.
 
Information Menu 
  Projector Information
 
Information Menu 
  Source Information...

Page 4.50  Rev C August 2009
4. Controlling the projector Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Digital Projection Information
Press  and   to select Digital Projection.
  Press 
 to see the DP Information screen.
•
Information menu continuedNotes
  When using the menus, press 
OSD  or  to hide or 
reveal the On-Screen-Display.
 
Information Menu 
  DP Contact Information 

Rev C August 2009 Page 4.51
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual  4. Controlling the projector 

Page 4.52  Rev C August 2009
4. Controlling the projector Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual 

Rev C August 2009  Page 5.1
5. Userware
Contents
Introduction ..........................................................................................................................................5.3
Applet version...................................................................................................................................5.3
Disconnect ....................................................................................................................................5.3...

Page 5.2  Rev C August 2009
5. Userware  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

MCGD page ........................................................................................................................................5.14
The MCGD measurement procedure ................................................................................................5.14
MCGD values...