Digital Projection Titan 1080p-600, Reference 1080p, Titan 1080p-700, 1080p Ultra Contrast User Manual

Rev C August 2009 Page 5.23
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual   5. Userware

Notes
 The Discover page is available 
only on the Standalone version 
of the Userware..
 The Userware can be used to 
control only one projector at a 
time, and only one instance can 
be running at one time.
  The 
Discover page can be 
used to switch control between 
multiple projectors.
  More than one computer can be 
used to control more than one 
projector on the same network....

Page 5.24  Rev C August 2009
5. Userware  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual
Refresh
Click on Refresh to search the network for other projectors.
  Any projectors previously connected, that are now no longer onli ne, will be 
marked Unreachable.
Connect
Click on the LAN IP address to connect to a projector in the list.
•
•
Notes
 The Discover page is available 
only on the Standalone version 
of the Userware..
 The Userware can be used to 
control only one...

Rev C August 2009  Page 6.1
6. Maintenance
Contents
Changing the lamp module ..............................................................................................................6.2
Changing	the	air	filter ........................................................................................................................6.3
Cleaning ................................................................................................................................................6.4
Projector...

Page 6.2  Rev C August 2009
6. Maintenance Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Changing the lamp module
Turn the power OFF and allow the lamp to cool for 5 minutes.
Unscrew the four captive finger screws securing the rear door - the door is 
tethered, so cannot be removed completely.
Disconnect the control cable from the rear of the lamp assembly.
Unscrew the two captive finger screws securing the lamp assembly to the 
projector, and pull out the whole lamp...

Rev C August 2009 Page 6.3
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual   6. Maintenance

Changing	the	air	filter
Turn the power OFF and allow the lamp to cool for 5 minutes.
Unscrew the four captive finger screws securing the rear door - the door is 
tethered, so cannot be removed completely.
Pull out both air filters.
Fit two new air filters, making sure that they are each the correct way around, as 
shown below.
Re-fit the rear door, making sure that the door tether...

Page 6.4  Rev C August 2009
6. Maintenance Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual
Notes
 Never use strong detergents 
or solvents such as alcohol 
or thinners to clean the 
projector and lens.
 NEVER touch the lamp or 
reflector.
Cleaning
Turn the projector off before cleaning.
Projector
Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild 
detergent.
Lens
Use a blower or lens paper to clean the lens, taking care not to scratch the...

Rev C August 2009  Page 7.1
7. Appendix
Contents
Troubleshooting ..................................................................................................................................7.2
Specifications ......................................................................................................................................7.4
Part numbers ....................................................................................................................................7.4
Optical...

Page 7.2  Rev C August 2009
7. Appendix  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Troubleshooting
problem possible solutions
The projector will not power up.Check that the mains plug is plugged in and that the mains supply is swi\
tched on.
Check any external fuses or breakers.
The projector shuts down after it has 
been in use for some time.
The projector may be overheating. Check that the air inlets and outlets are clear 
of any obstruction. Check that the air...

Rev C August 2009 Page 7.3
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual   7. Appendix

problem possible solutions
Projector does not respond to control 
commands from a computer.
Check that the LAN or serial cable is connected correctly.
See this section 7. Appendix, Connections
If using a LAN, check that the address setting is made correctly .
See section 4. Controlling the projector, Network menu
If using a serial cable, check that the baud rate is set correctly.
See...

Page 7.4  Rev C August 2009
7. Appendix  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Specifications
Part numbers
Projector
1080p-600  107-302
1080p-600 with SDI  108-643
Reference  107-973
Reference with SDI  108-644
1080p-700  108-722
Ultra Contrast  108-781
Rigging frame  107-956
Power cable 10A, Europe  102-163
Power cable 13A, North America  102-165
Power cable 10A, United Kingdom  102-180
Remote control  105-023
4x AAA batteries  105-922
Remote cable 5m  102-162...