Digital Projection Titan 1080p-600, Reference 1080p, Titan 1080p-700, 1080p Ultra Contrast User Manual

							
Rev C August 2009 Page 5.23
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual   5. Userware

Notes
 The Discover page is available 
only on the Standalone version 
of the Userware..
 The Userware can be used to 
control only one projector at a 
time, and only one instance can 
be running at one time.
  The 
Discover page can be 
used to switch control between 
multiple projectors.
  More than one computer can be 
used to control more than one 
projector on the same network.
Discover page
To see the Discover page, click on Discover.
  If the projector that launched the Userware is still connected, the n its 
LAN IP 
address  will be listed in the panel and marked Online.
 Projector Connected will be shown at the top left, together with the projector’s 
Serial No and Model.
Disconnect
Click on Disconnect to disconnect from the projector.
 Projector Disconnected will be shown at the top left.
Reconnect
Click on the LAN IP address to reconnect to the projector.
•
•
• 
						

							
Page 5.24  Rev C August 2009
5. Userware  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual
Refresh
Click on Refresh to search the network for other projectors.
  Any projectors previously connected, that are now no longer onli ne, will be 
marked Unreachable.
Connect
Click on the LAN IP address to connect to a projector in the list.
•
•
Notes
 The Discover page is available 
only on the Standalone version 
of the Userware..
 The Userware can be used to 
control only one projector at a 
time, and only one instance can 
be running at one time.
  The 
Discover page can be 
used to switch control between 
multiple projectors.
  More than one computer can be 
used to control more than one 
projector on the same network. 
						

							
Rev C August 2009  Page 6.1
6. Maintenance
Contents
Changing the lamp module ..............................................................................................................6.2
Changing	the	air	filter ........................................................................................................................6.3
Cleaning ................................................................................................................................................6.4
Projector ..........................................................................................................................................6.4
Lens ................................................................................................................................................6.4
Lamp module ...................................................................................................................................6.4 
						

							
Page 6.2  Rev C August 2009
6. Maintenance Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Changing the lamp module
Turn the power OFF and allow the lamp to cool for 5 minutes.
Unscrew the four captive finger screws securing the rear door - the door is 
tethered, so cannot be removed completely.
Disconnect the control cable from the rear of the lamp assembly.
Unscrew the two captive finger screws securing the lamp assembly to the 
projector, and pull out the whole lamp assembly.
Disconnect the timer cable from the lamp module to be changed.
Unscrew the four screws securing the lamp module to the assembly .
Fit a new lamp module, making sure that the plug on the top of the module 
mates properly with the power socket on the assembly.
Tighten the four lamp module fixing screws.
Reconnect the timer cable.
Re-fit the lamp assembly, making sure that no cables are trapped.
Reconnect the control cable.
Re-fit the rear door, making sure that the door tether is not trapped, and tighten 
the four screws.
•
•
•
•
•
•
•
•
•
•
•
•
Notes
 Always allow the lamp to cool 
for 5 minutes before: 
- disconnecting the power 
- moving the projector 
- changing the lamp
 There are no user-serviceable 
parts inside the lamp module. 
The whole module should be 
replaced.
 Only lamps supplied by 
Digital Projection and 
intended for this projector 
should be used. Fitting any 
other lamp could damage 
both projector and lamp, and 
will invalidate the warranty.
  At the end of life, the lamp 
will not strike, and the Lamp 
Indicator on the control panel 
will show red. (Typical lamp life 
is 2000 hours)
 Do not use the lamp for more 
than 2000 hours, as this may 
cause serious lamp failure, 
damage the lamp module 
and cause extra cost on 
replacement. 
 Take care not to touch the 
glass surface of the lamp 
module. If you do accidentally 
touch the glass, it should be 
cleaned before use.
 HID lamps produce high 
intensity light. Do not look 
directly at the light coming 
from the lamp housing or the 
lens.
  The filter should be changed at 
the same time as the lamp is 
changed - see next page.
 Opening the rear door will 
switch the projector OFF. The 
projector cannot be operated 
until the door is fully closed.
Door 
screws
Lamp 
Module
Control cable 
connector
Lamp 
Assembly
Assembly 
screws
Module 
screwsTimer cable 
connector
Power 
connector 
						

							
Rev C August 2009 Page 6.3
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual   6. Maintenance

Changing	the	air	filter
Turn the power OFF and allow the lamp to cool for 5 minutes.
Unscrew the four captive finger screws securing the rear door - the door is 
tethered, so cannot be removed completely.
Pull out both air filters.
Fit two new air filters, making sure that they are each the correct way around, as 
shown below.
Re-fit the rear door, making sure that the door tether is not trapped, and tighten 
the four screws.
•
•
•
•
•
Notes
 Always allow the lamp to cool 
for 5 minutes before:
 - disconnecting the power 
- moving the projector 
- changing the lamp
  The air filter should be changed 
regularly:
  - In a clean environment such 
as an office, change after 2000 
hours, at the same time as the 
lamp is changed.
  - In a dusty or smoky 
environment such as a theatre 
or public area, more frequent 
changes may be necessary.
 Opening the rear door will 
switch the projector OFF.
  The projector cannot be 
operated until the door is fully 
closed.
Filter 
sideFoam 
side
Foam 
side 
						

							
Page 6.4  Rev C August 2009
6. Maintenance Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual
Notes
 Never use strong detergents 
or solvents such as alcohol 
or thinners to clean the 
projector and lens.
 NEVER touch the lamp or 
reflector.
Cleaning
Turn the projector off before cleaning.
Projector
Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild 
detergent.
Lens
Use a blower or lens paper to clean the lens, taking care not to scratch the glass.
Lamp module
Use a blower or lens paper to clean ONLY the glass window, taking care not to 
scratch the glass. 
						

							
Rev C August 2009  Page 7.1
7. Appendix
Contents
Troubleshooting ..................................................................................................................................7.2
Specifications ......................................................................................................................................7.4
Part numbers ....................................................................................................................................7.4
Optical .............................................................................................................................................7.4
Electrical ..........................................................................................................................................7.5
Physical ...........................................................................................................................................7.5
Lens Data ........................................................................................................................................7.6
Dimensions ..........................................................................................................................................7.8
Input modes supported .....................................................................................................................7.9
Input connections .............................................................................................................................7.10
1. RGB1 input .................................................................................................................................7.10
2. RGB2 input .................................................................................................................................7.10
3. DVI-D input ..................................................................................................................................7.11
4. SDI input ....................................................................................................................................7.12
5. Composite video input .................................................................................................................7.12
6. S-Video input ..............................................................................................................................7.12
7. Component video input ................................................................................................................7.12
Control connections ........................................................................................................................7.13
Wired Remote control connection .....................................................................................................7.13
LAN connection ..............................................................................................................................7.13
Crossed cable ..............................................................................................................................7.13
Serial control input ..........................................................................................................................7.14
Null-modem cable .........................................................................................................................7.14
Serial port settings ........................................................................................................................7.14
Remote communications protocol ...............................................................................................7.15
Introduction ....................................................................................................................................7.15
Message Structure ..........................................................................................................................7.15
Operation Messages .....................................................................................................................7.16
Enhanced Messages .....................................................................................................................7.17
Operation Command examples ........................................................................................................7.18
Power  (0102) .............................................................................................................................7.18
Source  (3702) ............................................................................................................................7.19
Brightness (E502) ........................................................................................................................7.20
Contrast (E602) ...........................................................................................................................7.21
Shutter  (CF02) ...........................................................................................................................7.22
Quick Reference chart .....................................................................................................................7.23 
						

							
Page 7.2  Rev C August 2009
7. Appendix  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Troubleshooting
problem possible solutions
The projector will not power up.Check that the mains plug is plugged in and that the mains supply is swi\
tched on.
Check any external fuses or breakers.
The projector shuts down after it has 
been in use for some time.
The projector may be overheating. Check that the air inlets and outlets are clear 
of any obstruction. Check that the air filter is clean, and if it is dirty , fit a new one.
See section 1. Introduction, Getting to know the projector
No image is displayed.Check the lamp indicators on the control panel. If both indicators are red, then 
both lamps are faulty.
See section 5. Maintenance, Changing the lamp
Check that the input source is switched on and connected to the projector 
correctly.
Check that the correct image source is selected.
See section 4. Controlling the projector, Using the control keys and Input 
menu
Check that the brightness and contrast settings are set correctly.
See section 4. Controlling the projector, Picture menu
The projector may be overheating. Check that the air inlets and outlets are clear 
of any obstruction. Check that the air filter is clean, and if it is dirty, fit a new one.
The	image	does	not	fit	the	screen	
correctly.
Check that the correct lens is being used for the combination of screen size and 
projection distance, and that the zoom is adjusted correctly.
See section 2. Installation, Choosing a lens
Check the image size settings.
See section 4. Controlling the projector, Picture or Geometry menus
Uneven image quality.Check that the projector is parallel to the screen.
Check that the screen is flat, and securely mounted. 
						

							
Rev C August 2009 Page 7.3
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual   7. Appendix

problem possible solutions
Projector does not respond to control 
commands from a computer.
Check that the LAN or serial cable is connected correctly.
See this section 7. Appendix, Connections
If using a LAN, check that the address setting is made correctly .
See section 4. Controlling the projector, Network menu
If using a serial cable, check that the baud rate is set correctly.
See this section 7. Appendix, Connections
Check that the correct control codes are being used.
See Serial communications protocol (available from Digital Projection)
Projector does not respond to control 
commands from the remote control.
If you are using a cable, check that the cable is connected properly at both ends, 
that the cable is not damaged and that the cable is no longer than 50m (150ft).
If you are not using a cable, check that the infra red windows at the front and rear 
of the projector are not obstructed. Check that the cable is disconnected from 
the projector, as this disables the infra red. Check that the batteries are in good 
condition.
Check that the address setting on the remote control is set either to zero, or to the 
same as the projector.
See section 4. Controlling the projector, Communication menu
In the event that this troubleshooting guide has not solved the problem,\
 
then contact your Digital Projection dealer or service centre. 
						

							
Page 7.4  Rev C August 2009
7. Appendix  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Specifications
Part numbers
Projector
1080p-600  107-302
1080p-600 with SDI  108-643
Reference  107-973
Reference with SDI  108-644
1080p-700  108-722
Ultra Contrast  108-781
Rigging frame  107-956
Power cable 10A, Europe  102-163
Power cable 13A, North America  102-165
Power cable 10A, United Kingdom  102-180
Remote control  105-023
4x AAA batteries  105-922
Remote cable 5m  102-162
User manual on CD  105-923
Important Information  108-467
Replacement parts
Single 300W Lamp module + air filters 107-694
Two 300W Lamp modules + air filters  107-695
Single 350W Lamp module + air filters  108-772
Two 350W Lamp modules + air filters  108-773
Lenses High Brightness High Contrast
0.67 : 1 fixed lens  105-607 107-195
1.12 : 1 fixed lens (3 - 15m)  105-608 105-608
1.12 : 1 zoom lens (1.2 - 2m)  105-609 105-609
1.16 - 1.49 : 1 zoom lens  109 236 109-359
1.39 - 1.87 : 1 zoom lens  105-610 107-196
1.87 - 2.56 : 1 zoom lens  105-611 107-197
2.56 - 4.16 : 1 zoom lens  105-612 107-198
4.16 - 6.96 : 1 zoom lens  105-613 107-199
6.92 - 10.36 : 1 zoom lens  109-235 109-358
Optical
Digital Light Processor  3 x 0.95” Texas Instruments DMD™, resolution 1920 x 1080 pixels
Contrast Ratio
600 and 700  2000:1 full field (±10%)
Reference and Ultra Contrast  5000:1 full field (±10%)
Pixel	fill	factor   87%