Digital Projection Titan 1080p-600, Reference 1080p, Titan 1080p-700, 1080p Ultra Contrast User Manual

							
Rev C August 2009 Page 2.19
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual   2. Installation

Notes
 For more information about pin 
connections and control codes 
see section 7. Appendix.
 For more information about 
using a browser to control the 
projector see section 4. Using 
the menus.
Computer
Null-modem  
cable
Control connection examples
LAN connection
All of the projector’s features can be controlled via a LAN connection, using a 
standard internet browser package such as Internet Explorer.
rS232 connection
Computer
Crossed  
LAN cable
Computer
Hub or 
LAN
Un-crossed  
LAN cables
Projector
Serial 
RS232
LAN
Wired 
remote
Projector
Projector
Projector 
						

							
Page 2.20  Rev C August 2009
2. Installation  Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual
Notes
 Use only the power cable 
provided.
 Ensure that the power 
outlet includes a Ground 
connection, as this 
equipment MUST be earthed.
 Handle the power cable 
carefully and avoid sharp 
bends. Do not use a damaged 
power cable.
Power connection
When mains power is first applied, the projector will perform a self-test, then go into 
Standby mode.
The Power indicator on the control panel will show amber until the  POWER  
on the remote control or the keypad, is pressed for 3 seconds.
Power connection 
						

							
Rev C August 2009  Page 3.1
3. Getting Started
Contents
Switching the projector on ...............................................................................................................3.2
Selecting an input or test pattern ...................................................................................................3.2
Input ................................................................................................................................................3.2
Test pattern ......................................................................................................................................3.2
Adjusting the lens...............................................................................................................................3.3
Focus ..............................................................................................................................................3.3
Zoom ...............................................................................................................................................3.3
Shift .................................................................................................................................................3.3
Adjusting the projected image ........................................................................................................3.4
Picture settings .................................................................................................................................3.4
Geometry settings .............................................................................................................................3.4
Switching the projector off ...............................................................................................................3.4 
						

							
Page 3.2  Rev C August 2009
3. Getting Started Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Selecting an input or test pattern
Input
Press  or   to change to the next input up or down the following list:
1. RGB1
2. RGB2
3. DVI
4. SDI
5. Composite Video
6. S-Video
7. Component
Or press the numbered keys 1–7 to change directly to the input:
Test pattern
 If you have no video source connected to the projector, then you can display a test 
pattern as follows:
Press  on the remote control, to select a test pattern.
•
•
•
Switching the projector on
Connect the power cable between the mains supply and the projector .
Wait until the self-test has completed and the power indicator on the control 
panel shows amber. The lamp will be off, the shutter closed, and the projector 
will be in STANDBY mode.
Press POWER  on the remote control or the keypad, and hold for about 3 
seconds to switch the projector ON. The power indicator on the control panel will 
show green, the lamp will light and the shutter will open.
•
•
Notes
 For more information about 
connecting the power cable, 
see Power Connections, in 
section 2. Installation.
 For more detailed information 
about:
  - using the control keys on the 
remote control or keypad,
  - using the menus,
  see the next section: 
Controlling the projector.
 SDI not present on earlier 
models
Power 
connection 
						

							
Rev C August 2009 Page 3.3
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual  3. Getting Started

Notes
 Each time a new lens is 
fitted	to	the	projector,	
the calibration procedure 
must be carried out. See 
Setup menu, in Section 4. 
Controlling the projector.
  For more detailed information 
about:
  - using the control keys on the 
remote control or keypad,
  - using the menus,
  see the next section: 
Controlling the projector.
 When any of the three Lens 
adjustment keys is pressed, the 
blue Transmit indicator on the 
remote control will light for 10 
seconds:
  - after 10 seconds, if no 
adjustment has been made, 
the indicator will go out and 
the Lens adjustment key must 
be pressed again to resume 
adjustment.
  - to end the adjustment before 
10 seconds has elapsed, press 
the   key.
  - all other adjustments will 
be locked out until the Lens 
adjustment is ended.
Adjusting the lens
Focus
Press  followed by  and  to adjust the focus.
When adjustment is finished, press .
Zoom
Press  followed by  and  to adjust the zoom.
When adjustment is finished, press .
Shift
Press  followed by , ,  or  to shift the lens up, down, left or 
right.
When adjustment is finished, press .
•
•
• 
						

							
Page 3.4  Rev C August 2009
3. Getting Started Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual
Adjusting the projected image
Picture settings
Press a  key, followed by  and   to adjust these picture settings:
  Brightness   
 BRI 
Contrast   
 CON 
Saturation   
 SAT 
Phase   
 PHASE 
Aspect ratio   
 ASPECT
Geometry settings
Press Keystone  KEYST
followed by  and  to adjust the keystone correction.
Press Position  
 POS   (for all inputs except DVI)
followed by , ,  and  to adjust the picture position, for images 
smaller than the DMD.
Switching the projector off
Press POWER  on the remote control or keypad, and hold for 3 seconds, 
to switch the projector OFF.
•
•
•
•
Notes
 The Saturation control is 
available for Composite, S-
Video and Component inputs 
only.
 The Phase control is available 
for RGB inputs only.
 For more detailed information 
about:
  - using the control keys on the 
remote control or keypad,
  - using the menus,
  see the next section: 
Controlling the projector.
 For all adjustments that require 
more than one key to be 
pressed:
  - after 10 seconds, if no 
adjustment has been made, 
the indicator will go out and 
the adjustment key must be 
pressed again.
  - to end the adjustment before 
10 seconds has elapsed, press 
a different adjustment key, or 
press the Exit key.
 Always allow the lamp to cool 
for 5 minutes before:
 - disconnecting the power 
- moving the projector 
- changing the lamp 
						

							
Rev C August 2009  Page 4.1
4. Controlling the projector
Contents
Overview ...............................................................................................................................................4.4
Controlling the projector.....................................................................................................................4.4
Input modes and settings ...................................................................................................................4.5
Input mode detection .......................................................................................................................4.5
Mode library and mode history ...........................................................................................................4.5
Input presets ..................................................................................................................................4.6
Indicators ..............................................................................................................................................4.7
Input status indicators .......................................................................................................................4.7
The control panel ................................................................................................................................4.8
Keypad layout...................................................................................................................................4.8
Projector status indicators ..................................................................................................................4.8
The remote control .............................................................................................................................4.9
Layout .............................................................................................................................................4.9
Timeout ............................................................................................................................................4.9
Using the control keys ....................................................................................................................4.10
Power ............................................................................................................................................4.10
Shutter ...........................................................................................................................................4.10
On-Screen-Display ..........................................................................................................................4.10
Focus ............................................................................................................................................4.10
Zoom .............................................................................................................................................4.10
Shift ...............................................................................................................................................4.10
Auto-detect input mode ....................................................................................................................4.11
Source information ...........................................................................................................................4.11
Input ...............................................................................................................................................4.11
Input Presets ..................................................................................................................................4.12
Recall ........................................................................................................................................4.12
Save ..........................................................................................................................................4.12
Red, Green and Blue.......................................................................................................................4.13
Test pattern ....................................................................................................................................4.13
Picture settings ...............................................................................................................................4.13
Geometry settings ...........................................................................................................................4.13
Magnify and pan .............................................................................................................................4.14
On-screen-display size ....................................................................................................................4.14
Remote control address...................................................................................................................4.14
Remote control backlight .................................................................................................................4.14
Using the menus ...............................................................................................................................4.15
Navigating menus and submenus .....................................................................................................4.15
Menu controls .................................................................................................................................4.17
continued 
						

							
Page 4.2  Rev C August 2009
4. Controlling the projector Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Input menu .........................................................................................................................................4.18
Input Source ...................................................................................................................................4.18
Presets ..........................................................................................................................................4.19
Recall Presets ..............................................................................................................................4.19
Save Presets ...............................................................................................................................4.20
Delete Presets .............................................................................................................................4.21
Picture menu ......................................................................................................................................4.22
Brightness ......................................................................................................................................4.22
Contrast .........................................................................................................................................4.22
Saturation ......................................................................................................................................4.22
Hue ...............................................................................................................................................4.22
Gamma Correction ..........................................................................................................................4.23
Parametric Gamma .........................................................................................................................4.23
Phase ............................................................................................................................................4.23
Aspect Ratio ...................................................................................................................................4.24
Sharpness ......................................................................................................................................4.24
Geometry menu .................................................................................................................................4.25
Horizontal Position ..........................................................................................................................4.25
Vertical Position ..............................................................................................................................4.25
Aspect Ratio ...................................................................................................................................4.25
User Horizontal Aspect Ratio ...........................................................................................................4.26
User Vertical Aspect Ratio ...............................................................................................................4.26
Keystone ........................................................................................................................................4.26
Phase ............................................................................................................................................4.26
Resolution ......................................................................................................................................4.27
Input Detection .............................................................................................................................4.27
Blanking .........................................................................................................................................4.28
Blanking On/Off ............................................................................................................................4.28
Blanking adjust .............................................................................................................................4.28
Colour menu ......................................................................................................................................4.29
Colour Mode.................................................................................... ...............................................4.30
Colour Temperature ........................................................................................................................4.30
RGB Lift .........................................................................................................................................4.30
RGB Gain ......................................................................................................................................4.30
Component Type ............................................................................................................................4.30
Trim ...............................................................................................................................................4.31
Trim RGB Lift and Gain ..................................................................................................................4.31
Global Colourimetry .......................................................................................................................4.31
Setup menu ........................................................................................................................................4.32
Projector ........................................................................................................................................4.33
Orientation ..................................................................................................................................4.33
continued 
						

							
Rev C August 2009 Page 4.3
Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual  4. Controlling the projector

Control Panel Backlight ..................................................................................................................4.33
Component Video Sync ..................................................................................................................4.33
Keystone ....................................................................................................................................4.34
Lens Calibration ...........................................................................................................................4.34
Calibrate Focus ............................................................................................................................4.34
Calibrate Zoom ............................................................................................................................4.34
Test Pattern .................................................................................................................................4.35
Global Colourimetry ........................................................................................................................4.36
Colour Mode ................................................................................................................................4.37
Colour Temperature.................................................................................... ...................................4.37
RGB Lift .....................................................................................................................................4.37
RGB Gain ...................................................................................................................................4.37
Lamp .............................................................................................................................................4.38
Change Lamp Setting ....................................................................................................................4.38
Lamp Power ................................................................................................................................4.39
Lamp Mode .................................................................................................................................4.39
OK ............................................................................................................................................4.39
Cancel .......................................................................................................................................4.39
On Screen Display ..........................................................................................................................4.40
OSD Position ...............................................................................................................................4.40
OSD Size ....................................................................................................................................4.40
OSD Timeout ...............................................................................................................................4.40
Password .......................................................................................................................................4.41
Communication...............................................................................................................................4.42
Projector Address .........................................................................................................................4.42
Network .........................................................................................................................................4.43
MAC Address ...............................................................................................................................4.43
Connection ..................................................................................................................................4.43
DHCP ........................................................................................................................................4.44
IP Address ..................................................................................................................................4.44
Subnet Mask ...............................................................................................................................4.45
Gateway Mask .............................................................................................................................4.46
Wifi Channel ................................................................................................................................4.47
SSID ..........................................................................................................................................4.47
Restore Defaults .............................................................................................................................4.48
Centre Lens ...................................................................................................................................4.48
Information menu .............................................................................................................................4.49
Projector Information .......................................................................................................................4.49
Source Information ..........................................................................................................................4.49
Digital Projection Information ...........................................................................................................4.50 
						

							
Page 4.4  Rev C August 2009
4. Controlling the projector Digital Projection TITAN 1080p-600/700, Reference, Ultra Contrast User Manual

Overview
Controlling the projector
The projector can be controlled from:
the remote control
the keypad
the RS232 input
the Ethernet input
For more information about controlling the projector using the RS232 and 
Ethernet inputs, see Remote communications protocol in  section 7. 
Appendix.
For information about how to connect the projector, see Connecting the 
projector in section 2. Installation, and  Connections in section 7. Appendix.
Many features are controlled from the menus using the menu navigation keys on 
the remote control or keypad.
For more information about using the menus, see later in this section, Using the 
menus.
Some of the menu features, for example brightness, contrast and input preset 
operations, can be accessed directly using the control keys at the bottom of the 
remote control.
 Other features, eg zoom and focus, are controlled using the cont rol keys at the 
top of the remote control and keypad.
 For more information about using the control keys, see later in th is section, 
Using the control keys.
•
•
•
•
•
•
•
Notes
Menu navigation keys
Control keys