Dell 5100MP Projector Owners Manual

							Contacting Dell91
U.S.A. (Austin, 
Te x a s )
International 
Access Code: 011
Country Code: 1Automated Order-Status Servicetoll-free: 1-800-433-9014
AutoTech (portable and desktop 
computers)toll-free: 1-800-247-9362
Consumer (Home and Home Office) 
Technical Support 
toll-free: 1-800-624-9896
Customer Service toll-free: 1-800-624-9897
DellNet™ Service and Supporttoll-free: 1-877-Dellnet
(1-877-335-5638)
Employee Purchase Program 
(EPP) Customerstoll-free: 1-800-695-8133
Financial Services website:
www.dellfinancialservices.com
Financial Services (lease/loans)
toll-free: 1-877-577-3355
Financial Services (Dell Preferred 
Accounts [DPA])toll-free: 1-800-283-2210
Business 
Customer Service and Technical 
Support
toll-free: 1-800-822-8965
Employee Purchase Program 
(EPP) Customerstoll-free: 1-800-695-8133
Printers and Projectors Technical 
Supporttoll-free: 1-877-459-7298
Public (government, education, and healthcare)
Customer Service and Technical 
Support
toll-free: 1-800-456-3355
Employee Purchase Program 
(EPP) Customerstoll-free: 1-800-234-1490
Country (City)
International 
Access Code 
Country Code
City CodeDepartment Name or Service Area,
Website and E-Mail AddressArea Codes,
Local Numbers, and
Toll-Free Numbers 
						

							www.dell.com | support.dell.com
92Contacting Dell
Dell Salestoll-free: 1-800-289-3355
 or toll-free: 1-800-879-
3355
Dell Outlet Store (Dell 
refurbished computers)toll-free: 1-888-798-7561
Software and Peripherals Salestoll-free: 1-800-671-3355
Spare Parts Salestoll-free: 1-800-357-3355
Extended Service and Warranty 
Salestoll-free: 1-800-247-4618
Faxtoll-free: 1-800-727-8320
Dell Services for the Deaf, Hard-
of-Hearing, or Speech-Impairedtoll-free: 1-877-
DELLTTY
(1-877-335-5889)
U.S. Virgin 
IslandsGeneral Support1-877-673-3355
Ve n e z u e l aGeneral Support8001-3605
Country (City)
International 
Access Code 
Country Code
City CodeDepartment Name or Service Area,
Website and E-Mail AddressArea Codes,
Local Numbers, and
Toll-Free Numbers 
						

							Appendix: Regulatory Notices93
Appendix: Regulatory Notices
FCC Notices (U.S. Only)
Most Dell computer systems are classified by the Federal Communications Commission 
(FCC) as Class B digital devices. To determine which classification applies to your computer 
system, examine all FCC registration labels located on the bottom, side, or back panel of 
your computer, on card-mounting brackets, and on the cards themselves. If any one of the 
labels carries a Class A rating, your entire system is considered to be a Class A digital device. 
If all labels carry an FCC Class B rating as distinguished by either an FCC ID number or the 
FCC logo, ( ), your system is considered to be a Class B digital device.
Once you have determined your system’s FCC classification, read the appropriate FCC 
notice. Note that FCC regulations provide that changes or modifications not expressly 
approved by Dell could void your authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may 
cause undesired operation.
Class A
This equipment has been tested and found to comply with the limits for a Class A digital 
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio frequency energy and, if 
not installed and used in accordance with the manufacturer’s instruction manual, may cause 
harmful interference with radio communications. Operation of this equipment in a 
residential area is likely to cause harmful interference, in which case you will be required to 
correct the interference at your own expense.
Class B
This equipment has been tested and found to comply with the limits for a Class B digital 
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the manufacturer’s instruction manual, may cause interference with radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, you are 
encouraged to try to correct the interference by one or more of the following measures: 
						

							www.dell.com | support.dell.com
94Appendix: Regulatory Notices
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
FCC Identification Information
The following information is provided on the device or devices covered in this document in 
compliance with FCC regulations: 
• Product name: DLP Projector
• Model number: 5100MP/DELL
• Company name: 
Dell Inc.
One Dell Way
Round Rock, Texas 78682 USA
512-338-4400
NOM Information (Mexico Only)
The following information is provided on the device(s) described in this document in 
compliance with the requirements of the official Mexican standards (NOM):
Exporter: Dell Inc.
One Dell Way
Round Rock, TX 78682
Importer: Dell Computer de México, S.A. de C.V. 
Paseo de la Reforma 2620 - 11° Piso 
Col. Lomas Altas 
11950 México, D.F. 
Ship to: Dell Computer de México, S.A. de C.V. 
al Cuidado de Kuehne & Nagel de México S. de R.L.
Avenida Soles No. 55
Col. Peñon de los Baños
15520 México, D.F.
Model Supply Voltage Frequency Current Consumption
5100MP AC 90-240 V 50-60 Hz 4.7 A 
						

							Glossary95
Glossary
ANSI Lumens— A standard for measuring light output, used for comparing 
projectors. 
Aspect Ratio—The most popular aspect ratio is 4:3 (4 by 3). Early television and 
computer video formats are in a 4:3 aspect ratio, which means that the width of 
the image is 4/3 times the height.    
Backlit (Backlight)—Refers to a remote control, or a projector control panel, that 
has buttons and controls that are illuminated. 
Bandwidth— The number of cycles per second (Hertz) expressing the difference 
between the lower and upper limiting frequencies of a frequency band; also, the 
width of a band of frequencies.
Brightness— The amount of light emitting from a display or projection display or 
projection device. The brightness of projector is measured by ANSI lumens.
Color Temperature— A method of measuring the whiteness of a light source. 
Metal halide lamps have a higher temperature compared to halogen or 
incandescent lights.
Component Video—A method of delivering quality video in a format that 
contains all the components of the original image. These components are referred 
to as luma and chroma and are defined as YPbPr for analog component and 
YCbCr for digital component. Component video is available on DVD players and 
projectors.
Composite Video — The combined picture signal, including vertical and 
horizontal blanking and synchronizing signals.
Compression— A function that deletes resolution lines from the image to fit in 
the display area.
Compressed SVGA— To project an 800x600 image to a VGA projector, the 
original 800x600 signal must be compressed down. The data displays all the 
information with only two thirds of the pixels (307,000 vs 480,000). The resulting 
image is SVGA page size but sacrifices some of the image quality. If you are using 
an SVGA computers, connecting VGA to a VGA projector. provide better results.
Compressed SXGA— Found on XGA projectors, compressed SXGA handling 
allows these projectors to handle up to 1280x1024 SXGA resolution. 
Compressed XGA— Found on SVGA projectors, compressed XGA handling 
allows these projectors to handle 1024x768 XGA resolution. 
						

							www.dell.com | support.dell.com
96Glossary
Contrast Ratio— Range of light and dark values in a picture, or the ratio between 
their maximum and minimum values. There are two methods used by the 
projection industry to measure the ratio:
1Full  On/Off — measures the ratio of the light output of an all white image (full 
on) and the light output of an all black (full off) image. 
2ANSI — measures a pattern of 16 alternating black and white rectangles. The 
average light output from the white rectangles is divided by the average light 
output of the black rectangles to determine the 
ANSI contrast ratio. 
Full On/Off contrast is always a larger number than ANSI contrast for the same 
projector.
dB— decibel—A unit used to express relative difference in power or intensity, 
usually between two acoustic or electric signals, equal to ten times the common 
logarithm of the ratio of the two levels. 
Diagonal Screen— A method of measuring the size of a screen or a projected 
image. It measures from one corner to the opposite corner. A 9FT high, 12FT 
wide, screen has a diagonal of 15FT. This document assumes that the diagonal 
dimensions are for the traditional 4:3 ratio of a computer image as per the example 
above. 
DLP— Digital Light Processing—Reflective display technology developed by 
Texas Instruments, using small manipulated mirrors. Light passes through a color 
filter is sent to the DLP mirrors which arrange the RGB colors into a picture 
projected onto screen, also known as DMD.
DMD— digital Micro- Mirror Device— Each DMD consists of thousands of 
tilting, microscopic aluminum alloy mirrors mounted on a hidden yoke.  
DVI— Digital Visual Interface— Defines the digital interface between digital 
devices such as projectors and personal computers. For devices that support DVI, a 
digital to digital connection can be made that eliminates the conversion to analog 
and thereby delivers an unblemished image. 
Focal Length— The distance from the surface of a lens to its focal point.
Frequency— It is the rate of repetition in cycles per seconds of electrical signals. 
Measured in Hz. 
Hz — Frequency of an alternating signal. See Frequency. 
Keystone Correction— Device that will correct an image of the distortion 
(usually a wide-top narrow-bottom effect) of a projected image caused by 
improper projector to screen angle.
Laser Pointer— A small pen or cigar sized pointer that contains a small battery 
powered laser, which can project a small, red (typically), high intensity beam of 
light that is immediately very visible on the screen. 
						

							Glossary97
Maximum Distance— The distance from a screen the projector can be to cast an 
image that is useable (bright enough) in a fully darkened room. 
Maximum Image Size— The largest image a projector can throw in a darkened 
room. This is usually limited by focal range of the optics. 
Metal Halide Lamp— The type of lamp used in many medium and all high end 
portable projectors. These lamps typically have a half-life of 1000-2000 hours. 
That is they slowly lose intensity (brightness) as they are used, and at the half-life 
point, they are half as bright as when new. These lamps output a very hot 
temperature light, similar to mercury vapor lamps used in streetlights.. Their 
whites are extremely white (with slight bluish cast.) and make Halogen lamps 
whites look very yellowish by comparison.
Minimum Distance— The closest position that a projector can focus an image 
onto a screen.
NTSC— The United States broadcast standard for video and broadcasting.
PAL— A European and international broadcast standard for video and 
broadcasting. Higher resolution than NTSC.
Power Zoom— A zoom lens with the zoom in and out controlled by a motor, 
usually adjusted from the projectors control panel and also the remote control.
Reverse Image— Feature that allows you to flip the image horizontally. When 
used in a normal forward projection environment text, graphics, etc, are 
backwards. Reverse image is used for rear projection.
RGB— Red, Green, Blue— typically used to describe a monitor that requires 
separate signals for each of the three colors.
S-Video—A video transmission standard that uses a 4-pin mini-DIN connector to 
send video information on two signal wires called luminance (brightness, Y) and 
chrominance (color, C). S-Video is also referred to as Y/C.
SECAM— A French and international broadcast standard for video and 
broadcasting. Higher resolution than NTSC.
SVGA— Super Video Graphics Array— 800 x 600 pixels count.
SXGA— Super Ultra Graphics Array,—1280 x 1024 pixels count.
UXGA— Ultra Extended Graphics Array—1600 x 1200 pixels count.
VGA— Video Graphics Array—640 x 480 pixels count.
XGA— Extra Video Graphics Array— 1024 x 768 pixels count. 
						

							www.dell.com | support.dell.com
98Glossary
Zoom Lens— Lens with a variable focal length that allows operator to move the 
view in or out making the image smaller or larger. 
Zoom Lens Ratio— Is the ratio between the smallest and largest image a lens can 
projector from a fixed distance. For example, a 1.4:1 zoom lens ratio means that a 
10 foot image without zoom would be a 14 foot image with full zoom.  
						

							Index 99
Index
A
Adjusting the Projected Image 20
Adjusting the Projector Height 
20
lower the projector
Elevator button 20
Elevator foot 20
Tilt adjustment wheel 20
Lowering the Projector Height 
20
Adjusting the Projector Zoom and 
Focus 21
Focus ring 21
Zoom tab 21
C
Changing the Lamp 48
Connecting the Projector
12V DC power cord 15
Automatic screen 15
BNC to VGA cable 14
Commercial RS232 control 
box 17
Composite video cable 14
Connecting a Computer with 
a D-sub to D-sub 
Cable 11
Connecting a Computer with 
an M1 to D-sub/USB 
Cable 10
Connecting a DVD Player 
with a D-sub to YPbPr Cable 12
Connecting a DVD Player 
with an M1 to HDTV 
Cable 12
Connecting to a DVD Player 
12
Connection with Commercial 
RS232 Control Box 
17
Connection with PC 16
D-sub to D-sub cable 11
D-sub to YPbPr cable 12
Installation for Driving 
Automatic Screen 15
M1 to HDTV cable 12
M1A to D-sub/USB cable 10
Power cord 10, 11, 12, 13, 14, 
15, 16, 17
RCA to RCA component cable 
13
RS232 cable 16, 17
To Computer 10
Connection Ports
12 Volt DC relay output 9
Audio input connector 9
Audio output connector 9
BNC connector 9
Component video input 
connector 9
HDMI connector 9
IR receiver/ RF transceiver 9 
						

							100 Index
Kensington lock hole 9
M1 signal in connector 9
Power cord connector 9
RJ45 network connector 9
RS232 connector 9
S-video input connector 9
VGA input connector 9
VGA output connector 9
Video input connector 9
Control Panel 23
D
Dell
contacting 65
M
Main Unit 8
Control panel 8
Elevator button 8
Focus ring 8
Lens 8
Lens Cap 8
Remote control transceiver 8
Zoom tab 8
O
On-Screen Display
Audio Menu 30
Computer Source Menu 35
Factory Reset Menu 35
Image Settings Menu 28
Language Menu 33
Management Menu 31
Network Settings Menu 34
PIP Setting Menu 33Video Source Menu 36
P
Powering On/Off the Projector
Powering Off the Projector 19
Powering On the Projector 19
R
Remote Control 25
S
Specifications
Audio 52
Brightness 51
Color Wheel Speed 51
Compatibility Modes 63
Contrast Ratio 51
Dimensions 52
Displayable Color 51
Environmental 52
H. Frequency 51
I/O Connectors 52
Lamp 51
Light Valve 51
Networking Protocol 52
Noise Level 52
Number of Pixels 51
PIP combination sources 56
Power Consumption 52
Power Supply 51
Projection Distance 51
Projection Lens 51
Projection Screen Size 51
Regulatory 52
RS232 Protocol 53