Home > Dell > Printer > Dell 1350cnw User Guide

Dell 1350cnw User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Dell 1350cnw User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Maintaining Your Printer267
    2Pinch the cartridge firmly as shown in the illustration.
    3Pull the toner cartridge out.
    4Pull the other three cartridges out as well.
    5Pull the cleaning rod out.
     
    						
    							268Maintaining Your Printer
    6Insert the cleaning rod fully into the hole beside the arrow on the printer 
    until its tip reaches the interior of the printer as illustrated below, and then 
    pull it out.
    7Repeat the same procedure for the other three holes.
    8Return the cleaning rod to its original location.
     
    						
    							Maintaining Your Printer269
    9Replace the black cartridge by adjusting it to the associated cartridge 
    holder, and then insert it firmly by pressing near the center of the label 
    until the cartridge clicks.
    10Replace the other three cartridges as well.
    11Close the toner access cover.
    Cleaning the Color Toner Density (CTD) Sensor
    Clean the CTD sensor only when an ale rt for the CTD sensor is shown on the 
    Status Monitor or operator panel.
    1
    Ensure that the printer is turned off.
    2Push the rear cover release handle and open the rear cover.
     
    						
    							270Maintaining Your Printer
    3Clean the CTD sensor inside the printer with a clean dry cotton swab.
    4Close the rear cover.
    Adjusting Color Registration
    This section describes how to adjust  the color registration when you first 
    install the printer or after mo ving it to a new location.
     
    						
    							Maintaining Your Printer271
    Performing Auto Correct
    Auto Correct on the operator panel allows you to correct the color 
    registration automatically.
    1
    Press the  (Menu) button.
    2Press the   button until Admin Menu appears, and then press the   
    button.
    3Press the   button until Maintenance appears, and then press the   
    button.
    4Press the   button until Color Reg Adj appears, and then press the 
     button.
    5Ensure that Auto Correct appears, and then press the   button.
    6Ensure that Are you sure? appears, and then press the   button.
    Auto correct is performed.
    Printing the Color Registration Chart 
    The Operator Panel
    1Load paper. For details about loading paper, see Loading Paper on 
    page 45.
    2Press the  (Menu) button.
    3Press the   button until Admin Menu appears, and then press the   
    button.
    4Press the   button until Maintenance appears, and then press the   
    button.
    5Press the   button until Color Reg Adj appears, and then press the 
     button.
    6Press the   button until Color Regi Chart appears, and then press 
    the  button.
    The color registration chart is printed.
    The Tool Box
     NOTE: 
     
    						
    							272Maintaining Your Printer
    1Click Start All Programs Dell Printers Dell 1350cnw Color 
    Printer
     Tool Box.
     NOTE: The Select Printer window appears in this step, when multiple printer 
    drivers are installed on your computer. In this case, click the name of  Dell 
    1350cnw Color Printer  listed in Printer Name, and then click OK.
    The Tool Box opens.
    2Click the Printer Maintenance tab.
    3Select Color Registration Adjustment from the list at the left side of the 
    page.
    The 
    Color Registration Adjustment page is displayed.
    4Click the Start button next to Color Regi Chart.
    The color registration chart is printed.
    Determining Values
    On the color registration chart printed,  find the straightest lines where the 
    two black lines and the colored line are  most closely aligned for each color (Y, 
    M, and C).
    If you find the straightest line, make a note of the value (-5–+5) indicated by 
    the straightest line for each color.
    When the value is 0 for each color,  you do not need to adjust the color 
    registration.
    When the value is not 0, enter the value according to the procedure in 
    Entering Values on page 273.
     
    						
    							Maintaining Your Printer273
    Entering Values
    The Operator Panel
    Using the operator panel, enter the values that you found in the color 
    registration chart to make adjustments. 
    1
    Load paper. For details about loading paper, see Loading Paper on 
    page 45.
    2Press the  (Menu) button.
     
    						
    							274Maintaining Your Printer
    3Press the   button until Admin Menu appears, and then press the   
    button.
    4Press the   button until Maintenance appears, and then press the   
    button.
    5Press the   button until Color Reg Adj appears, and then press the 
     button.
    6Press the   button until Enter Number appears, and then press the   
    button.
    7Ensure that Enter (Y, M, C) appears, and then press the   or   
    button until you reach the value (for example, +3) displayed on the chart.
    8Press the   button once and move  the cursor to the next value.
    9Repeat steps 7 and 8 to enter all of the digits, and then press the   
    button.
    10Ensure that Enter (LY, LM, LC) appears.
    11Press the   or   button until you reach the value (for example, +3) 
    displayed on the chart.
    12Press the   button once and move the cursor to the next value.
    13Repeat steps 11 and 12 to enter all of the digits, and then press the   
    button.
    14Ensure that Enter (RY, RM, RC) appears.
    15Press the   or   button until you reach the value (for example, +3) 
    displayed on the chart.
    16Press the   button once and move  the cursor to the next value.
    17Repeat steps 15 and 16 to enter all of the digits, and then press the   
    button.
    18Press the   (Cancel) button.
    19Press the   button until Color Regi Chart appears, and then press 
    the  button.
    The color registration chart is printed with the new values.
    20Press the   button.
    21Adjust till all straight lines are at the  value of 0. Viewing the images before 
    and after will help.
     
    						
    							Maintaining Your Printer275
    The Tool Box
     NOTE: 
    Using the Tool Box, enter the values th at you found in the color registration 
    chart to make adjustments. 
    1
    Click Start All Programs Dell Printers Dell 1350cnw Color 
    Printer
     Tool Box.
     NOTE: The Select Printer window appears in this step, when multiple printer 
    drivers are installed on your computer . In this case, click the name of Dell 
    1350cnw Color Printer  listed in Printer Name, and then click OK.
    The Tool Box opens.
    2Click the Printer Maintenance tab.
    3Select Color Registration Adjustment from the list at the left side of the 
    page.
    The 
    Color Registration Adjustment page is displayed.
    4Select the value with the stra ight line, and then click the Apply New 
    Settings
     button.
    5Click the Start button next to Print Color Regi Chart.
    The color registration chart is printed with the new values.
    6Adjust till all straight lines are at the value of 0. Show image of before and 
    after adjustment will help.
     NOTE: After printing the color registration chart, do not turn off the printer until the 
    printer motor has stopped running.
     
    NOTE: If 0 is not next to the straightest lines, determine the values and adjust the 
    printer again. 
     
    						
    All Dell manuals Comments (0)

    Related Manuals for Dell 1350cnw User Guide