Dell 1350cnw User Guide
Have a look at the manual Dell 1350cnw User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Loading Print Media167 4Pull the MPF extension forward until it stops. 5Adjust the paper width guides to their maximum width. 6Before loading the print media, flex the sheets back and forth, and then fan them. Straighten the edges of the stack on a level surface.
168Loading Print Media 7Load print media on the MPF with the top edge first and with the recommended print side facing up. 8Adjust the width guides until they re st lightly against the edges of the stack of print media. 9Slide the length guide towards the prin ter until it touches the print media.
Loading Print Media169 NOTE: Depending on the size of print media, first slide the length guide backward until it stops, and then slide t he MPF extension until it touches print media. 10Insert the PSI into the printer and th en align the PSI to the marking on the paper tray.
170Loading Print Media Loading Envelopes in the Multipurpose Feeder (MPF) NOTE: When you print on envelopes, be sure to specify the envelope setting on the printer driver. If not specified, the print image will be rotated 180 degrees. When Loading Envelope#10, DL, or Monarch Load envelopes with the side to be prin ted on facing up, the flap side facing down, and the flap turned to the right. To prevent DL and Monarch from being wrinkled, they are recommended to be loaded with the prin t-side facing up, flap opened, and facing you.
Loading Print Media171 When Loading C5 Load envelopes with the side to be printed on facing up, with the flap open. NOTICE: Never use envelopes with windows, or coated linings. These lead to paper jams and can cause damage to the printer. NOTE: If you do not load envelopes in the MPF right after they have been removed from the packaging, they may bulge. To av oid jams, flatten them as shown below when loading them in the MPF.
172Loading Print Media NOTE: If envelopes are still not fed correctly, add some bending to the flap of the envelopes as shown in the following illustration. The amount of the bending shall be 5mm (0.20 inches) or less. NOTE: To confirm the correct orientation of each print media such as envelopes, see the instruction on the Envelope/Paper Setup Navigator on the printer driver.
Loading Print Media173 Loading Letterhead The letterhead must be toward the top edge of MPF with the print side facing up. However, the letterhead must be inse rted top edge first with the print side facing down when loading paper into the MPF. Loading Print Media in the Priority Sheet Inserter (PSI) NOTE: To avoid paper jams, do not remove the PSI while printing is in progress. NOTE: Use only laser print media. Do not use ink jet paper in this printer. 1Open the front cover. 2Slide the PSI forward, and then align the PSI to the marking on the paper tray.
174Loading Print Media 3Adjust the paper width guides to their maximum width. 4Before loading the print media, flex the sheets back and forth, and then fan them. Straighten the edges of the stack on a level surface. 5Load print media on the PSI with the top edge first and with the recommended print side facing up.
Loading Print Media175 6Adjust the width guides until they rest lightly against the edges of the stack of print media. 7Select the paper type from the printer driver if the loaded print media is not standard plain paper. If a user-specified print media is loaded in the PSI, you must specify the paper size setting by using the printer driver. Loading an Envelope in the Priority Sheet Inserter (PSI) NOTE: Be sure to fully insert the envelope un til it stops. Otherwise, print media that is loaded on the MPF will be fed. NOTE: When you print on envelopes, be sure to specify the envelope setting on the printer driver. If not specified, the print image will be rotated 180 degrees. When Loading Envelope#10, DL, or Monarch L oad an envelope with the side to be pr inted on facing up, the flap side facing down, and the flap turned to the right.
176Loading Print Media To prevent DL and Monarch from being wrinkled, they are recommended to be loaded with the print-side facing up, flap opened, and facing you. When Loading C5 Load envelopes with the side to be prin ted on facing up, with the flap open.