Dell 1350cnw User Guide

							Dell Printer Configuration Web Tool137
DNSIPv4*3Get DNS Server 
Address from 
DHCP Displays if the printer receives 
the DNS server address 
automatically from the DHCP 
server.
Current DNS 
Server Address Displays the DNS server 
address.
IPv6
*4Get DNS Server 
Address from 
DHCPv6-lite Displays if the printer receives 
the DNS server address 
automatically from the 
DHCPv6-lite server.
Current DNS 
Server Address Displays the DNS server 
address.
Priority to IPv6 
DNS Name 
Resolution*
7
Displays whether to use the 
DNS Name Resolution 
feature.
LPD Port Status Displays the port status.
Connection 
Ti me-Out Displays the connection time-out period.
Po r t 9 1 0 0 Po r t  S t a t u s Displays the port status.
Po r t  N u m b e r Displays the port number.
Connection 
Ti me-Out Displays the connection time-out period.
WSD Port Status Displays the WSD (Web Services on Devices) 
port status.
Po r t  N u m b e r Displays the WSD port number.
Receive Time-
Out Displays the receive time-out period.
Notification 
Ti me-Out Displays the notification time-out period.
Maximum 
Number of TTL Displays the maximum number of TTLs.
Maximum 
Number of 
Notification Displays the maximum number of notifications.
 
						

							138Dell Printer Configuration Web Tool
E-Mail Alert Setup Page
Purpose:
To verify the current settings of SMTP/POP (Simple Mail Transfer Protocol/
Post Office Protocol) used for the e-mail feature and E-Mail Alerts feature. In 
this page, you can only verify the settings of items. If you want to change the 
settings, go to the pages in the Print Server Settings  tab.
Va l u e s :
HTTP Port Status Displays the port status.
Port  N umb er Displays the port number.
Simultaneous 
Connections Displays the number of connections received 
simultaneously by the client.
Connection 
Time-Out Displays the connection time-out period.
Bonjour 
(mDNS) Port  S t at us
Displays the port status.
Host Name Displays the host name.
Printer Name Displays the printer name.
SNMP Port Status Displays the port status.
LLTD Port Status Displays the port status.
IP Filter 
(IPv4) *
8Address Displays the list of IP addresses that are permitted 
or denied access to the printer.
Address Mask Displays the list of subnet mask that are 
permitted or denied access to the printer.
Active Mode Displays whether to be permitted or denied access 
to the printer.
*1This item is displayed only when the  printer is connected with a wired network.*2This item is displayed only when the pr inter is connected with a wireless network.*3This item is displayed when IPv4 or Dual Stack Mode is selected.*4This item is displayed when IPv6 or Dual Stack Mode is selected.*5This item is displayed only when Use Manual Address is Enable.*6This item is displayed only when an IP address has been assigned.*7This item is available only  when using IPv6 dual mode.*8This item is only available for LPD or Port9100.
 
						

							Dell Printer Configuration Web Tool139
E-Mail Server 
SettingsPo r t  S t a t u s
Displays the port status.
Primary SMTP 
Gateway Displays the primary SMTP gateway.
SMTP Port 
Number Displays the SMTP port number.
E-Mail Send 
Authentication Displays the authentication method for outgoing 
e-mail.
POP3 Server 
Address Displays the POP3 server address.
POP3 Port 
Number Displays the POP3 port number.
Reply Address Displays the reply e-mail address sent with each 
E-mail Alert.
SMTP Server 
Connection Displays the status of the SMTP server 
connection.
E-Mail Alert 
Settings E-Mail List 1
Displays the acceptable e-mail addresses for the 
E-Mail Alert feature specified in  E-mail List 1.
Select Alerts for 
List 1 Supplies Alerts
Displays the e-mail alert 
receive status for consumables.
Paper Handling 
Alerts Displays the e-mail alert 
receive status for paper 
handling.
Service Call Displays the e-mail alert 
receive status for service calls.
E-Mail List 2 Displays the acceptable e-mail addresses for the 
E-Mail Alert feature specified in  E-mail List 2.
Select Alerts for 
List 2 Supplies Alerts
Displays the e-mail alert 
receive status for consumables.
Paper Handling 
Alerts Displays the e-mail alert 
receive status for paper 
handling.
Service Call Displays the e-mail alert 
receive status for service calls.
 
						

							140Dell Printer Configuration Web Tool
Print Server Settings
The Print Server Settings  tab contains the Basic Information , Po r t  S e t t i n g s, 
TCP/IP , E-Mail Alert , Bonjour (mDNS) , SNMP , LLTD , Wireless LAN , and 
Reset Print Server  pages.
Basic Information
Purpose:
To configure the basic in formation of the printer.
Va l u e s :
 NOTE: The  Auto Refresh  feature is effective for th e contents of the top frame, 
Printer Status  page, Job List page, and  Completed Jobs page.
Port Settings
Purpose:
To enable or disable printing connect ors and management protocol features.
Va l u e s :
System Settings Printer Name Specifies the name of the printer using up to 31 
alphanumeric characters.
Location Specifies the location of the printer using up to 63 
alphanumeric characters.
Contact Person Specifies the contact name, number, and other 
information of the administrator and service 
center using up to 63 al phanumeric characters.
Administrator 
E-Mail Address Specifies the contact address of the administrator 
and service center using up to 63 alphanumeric 
characters.
Asset Tag 
Number Enter the asset tag number for the printer.
EWS Settings Auto Refresh Automatically refreshes the contents of the status 
display pages. 
Auto Refresh 
Interval Sets the time interval for refreshing the contents 
of the status display pages automatically from 15 
to 600 seconds.
 
						

							Dell Printer Configuration Web Tool141
 NOTE: The settings in the Port Settings page will be valid only when the printer is 
rebooted. When you change or configure the settings, click the  Apply new settings 
button to apply new settings.
TCP/IP
Purpose:
To configure the IP address, subnet mask , and gateway address of the printer. 
Va l u e s :
Ethernet *1Ethernet 
Settings Auto
Detects Ethernet transmission 
rate and the duplex settings 
automatically.
10Base-T 
Half-Duplex Selects 10Base-T Half-Duplex 
as the default value.
10Base-T 
Full-Duplex Selects 10Base-T Full-Duplex 
as the default value.
100Base-TX 
Half-Duplex Selects 100Base-TX Half-
Duplex as the default value.
100Base-TX Full-
Duplex Selects 100Base-TX Full-
Duplex as the default value.
Current Ethernet Settings Displays the current settings of 
Ethernet.
MAC Address Displays the MAC address of the printer.
Po r t  S t a t u s L P D Specifies whether to enable LPD.
Port9100 Specifies whether to enable Port9100.
WSD Specifies whether to enable the WSD port.
Bonjour 
(mDNS) Specifies whether to enable the Bonjour(mDNS) 
feature.
E-Mail Alert Specifies whether to enable the E-Mail Alert  
feature.
SNMP Specifies whether to enable the SNMP. 
LLTD Specifies whether to enable LLTD.
*1This item is available only when the printer is connected with a wired network.
 
						

							142Dell Printer Configuration Web Tool
TCP/IP 
SettingsIP Mode
Specifies the IP mode.
Host Name Specifies the host name.
IPv4 IP Address Mode Selects the IP address mode.
Manual IP 
Address Manually sets the IP address.
Manual Subnet 
Mask Manually sets the subnet 
mask.
Manual Gateway 
Address Manually sets the gateway 
address.
IPv6 Enable Stateless  Address To enable the stateless address.
Use Manual 
Address To set the IP address manually.
Manual Address Manually sets the IP address. 
To specify an IPv6 address, 
enter the address. Followed by 
a slash (/) and then 64. For 
details, consult your system 
administrator.
Manual Gateway 
Address Manually sets the gateway 
address.
 
						

							Dell Printer Configuration Web Tool143
DNSDNS Domain 
Name Specifies the domain name of the domain name 
server. Up to 255 alphanumeric characters, 
periods, and hyphens can be used. If you need to 
specify more than one domain name, separate 
them using a comma or semicolon.
IPv4 Get DNS Server 
Address from 
DHCP Specifies if the printer receives 
the DNS server address 
automatically from the DHCP 
server.
Manual DNS 
Server Address Sets the DNS server address.
IPv6 Get DNS Server 
Address from 
DHCPv6-lite Specifies if the printer receives 
the DNS server address 
automatically from the 
DHCPv6-lite server.
Manual DNS 
Server Address Sets the DNS server address.
Priority to IPv6 
DNS Name 
Resolution Specifies whether to enable 
the DNS Name Resolution 
feature.
LPD Connection 
Ti me-Out Sets the connection time-out period from 1 to 
1000 seconds.
IP Filter (IPv4) Click IP Filter (IPv4)  to set the IP filter settings 
on the  IP Filter (IPv4)  page.
Po r t 9 1 0 0 Po r t  N u m b e r Sets the port number from 9000 to 9999.
Connection 
Ti me-Out Sets the connection time-out period between 1 
and 1000 seconds.
IP Filter (IPv4) Click IP Filter (IPv4)  to set the IP filter settings 
on the  IP Filter (IPv4)  page.
 
						

							144Dell Printer Configuration Web Tool
E-Mail Alert
Purpose:
To configure settings for E-Mail Alert. This page can also be displayed by 
clicking  E-Mail Alert  in the left frame.
Va l u e s :
WSD Port Number Sets the port number. This must be 80 or between 
8000 and 9999.
Receive Time-
Out Sets the receive time-out period from 1 to 65535 
seconds.
Notification 
Time-Out Sets the notification time-out period from 1 to 60 
seconds.
Maximum 
Number of TTL Sets the maximum number of TTL from 1 to 10.
Maximum 
Number of 
Notification Sets the maximum number of notifications from 
10 to 20.
HTTP Port Number  Sets the port number. This must be 80 or between 
8000 and 9999.
Simultaneous 
Connections Displays the maximum number of connections 
received simultaneously by the client.
Connection 
Time-Out Sets the connection time-out period from 1 to 255 
seconds.
 
						

							Dell Printer Configuration Web Tool145
E-Mail Server 
SettingsPrimary SMTP 
GatewaySets the primary SMTP gateway.
SMTP Port 
Number Specifies the SMTP port number. This must be 
25, 587 or between 5000 and 65535.
E-Mail Send 
Authentication Specifies the authentication method for outgoing 
e-mail.
SMTP Login 
User Specifies the SMTP login user. Up to 63 
alphanumeric characters, periods, hyphens, 
underscores, and at symbols (@) can be used. If 
specifying more than one address, separate them 
using commas.
SMTP Login 
Password Specifies the SMTP account password using up to 
31 alphanumeric characters.
Re-enter SMTP 
Login Password Enter the SMTP account password again to 
confirm.
POP3 Server 
Address*
1Specifies the POP3 server address in IP address 
format of aaa.bbb.ccc.ddd or as a DNS host 
name using up to 63 characters.
POP3 Port 
Number*
1Specifies the POP3 server port number. This must 
be 110 or between 5000 and 65535.
POP User 
Name*
1Specifies the POP3 account user name. Up to 63 
alphanumeric characters, periods, hyphens, 
underscores, and at symbols (@) can be used. If 
specifying more than one address, separate them 
using commas.
POP User 
Password*
1Specifies the POP3 account password using up to 
31 alphanumeric characters.
Re-enter POP 
User 
Password*
1
Enter the POP3 account password again to 
confirm.
Reply Address Designates the reply e-mail address sent with each 
E-mail Alert.
SMTP Server 
Connection Displays the status of the SMTP server 
connection.
 
						

							146Dell Printer Configuration Web Tool
Bonjour (mDNS)
Purpose:
To configure the detailed settings for Bonjour.
Va l u e s :
SNMP
Purpose:
To configure the detailed settings of SNMP.
E-Mail Alert 
Settings E-Mail List 1
Sets acceptable e-mail addresses for the E-Mail 
Alert feature using up to 255 alphanumeric 
characters.
Select Alerts for 
List 1 Supplies Alerts
Specifies whether to receive an 
e-mail alert for consumables.
Pa p e r  H a n d l i n g  
Alerts Specifies whether to receive an 
e-mail alert for paper handling.
Service Call Specifies whether to receive an 
e-mail alert for service calls.
E-Mail List 2 Sets acceptable e-mail addresses for the E-Mail 
Alert feature using up to 255 alphanumeric 
characters.
Select Alerts for 
List 2 Supplies Alerts
Specifies whether to receive an 
e-mail alert for consumables.
Pa p e r  H a n d l i n g  
Alerts Specifies whether to receive an 
e-mail alert for paper handling.
Service Call Specifies whether to receive an 
e-mail alert for service calls.
*1This item is available only when  POP before SMTP for E-Mail Send Authentication  is 
selected.
Host Name Specifies the host name up to 63 alphanumeric characters and - 
(dash). The original setting will remain valid if nothing is entered.
Printer Name Specifies the printer name up to  63 alphanumeric characters and 
symbol sets.