compaq lte 5000 User Manual
Have a look at the manual compaq lte 5000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 65 Compaq manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 258
1. Prepare the expansion base for disassembly as described in Section 7.3.
2. Remove the bottom cover assembly as described in Section 7.5.
3. Remove the main board as described in Section 7.8.
4. Remove the screw and washer [1] that connects the docking bar [2] to
the puller plate assembly [3] (Figure 7-34)
5. Lift the docking bar [1] and its bushing [2] out of the assembly
(Figure 7-35).](http://img.usermanuals.tech/thumb/1258/38934/w64_compaq-lte-5000-257.png "Page 258
1. Prepare the expansion base for disassembly as described in Section 7.3.
2. Remove the bottom cover assembly as described in Section 7.5.
3. Remove the main board as described in Section 7.8.
4. Remove the screw and washer [1] that connects the docking bar [2] to
the puller plate assembly [3] (Figure 7-34)
5. Lift the docking bar [1] and its bushing [2] out of the assembly
(Figure 7-35).")
![Page 260
7. To remove the puller plate assembly [1], see Figure 7-37 and complete
the following steps:
a. Slide the puller plate all the way back [2].](http://img.usermanuals.tech/thumb/1258/38934/w64_compaq-lte-5000-259.png "Page 260
7. To remove the puller plate assembly [1], see Figure 7-37 and complete
the following steps:
a. Slide the puller plate all the way back [2].")
![Page 261
b. Lift the rear of the puller plate [4] and continue to slide back
while pulling the catch [3] out of the opening in the base.
To install the puller plate assembly, press the docking aid [3] through
the opening and slide the puller plate [1] into place (Figure 7-37).
Reverse the previous procedure to install the docking mechanism. Be sure
to use nylock screws for the docking bar and spring.
Chapter 7.19 Docking Lever and Cover
To remove the docking lever and cover, complete the following steps:
1....](http://img.usermanuals.tech/thumb/1258/38934/w64_compaq-lte-5000-260.png "Page 261
b. Lift the rear of the puller plate [4] and continue to slide back
while pulling the catch [3] out of the opening in the base.
To install the puller plate assembly, press the docking aid [3] through
the opening and slide the puller plate [1] into place (Figure 7-37).
Reverse the previous procedure to install the docking mechanism. Be sure
to use nylock screws for the docking bar and spring.
Chapter 7.19 Docking Lever and Cover
To remove the docking lever and cover, complete the following steps:
1....")
![Page 262
4. The docking lever slider is now free to be removed [1]
(Figure 7-39). Note that the little tab on one side of the docking
lever slider [2] goes toward the outside of the expansion base at
reassembly.](http://img.usermanuals.tech/thumb/1258/38934/w64_compaq-lte-5000-261.png "Page 262
4. The docking lever slider is now free to be removed [1]
(Figure 7-39). Note that the little tab on one side of the docking
lever slider [2] goes toward the outside of the expansion base at
reassembly.")
![Page 263
5. Remove the screws [1] and lift out the docking lever cover [2]
(Figure 7-40).](http://img.usermanuals.tech/thumb/1258/38934/w64_compaq-lte-5000-262.png "Page 263
5. Remove the screws [1] and lift out the docking lever cover [2]
(Figure 7-40).")
![Page 264
6. Remove the docking lever cover insert [3] as shown in Figure 7-40.
Reverse the above procedures to install the docking lever, docking lever
slider, or docking lever cover.
Chapter 7.20 Security Lock Bracket
The security lock bracket simply slides into its mounting seat on the side
of the expansion base. To remove and install the security lock bracket,
complete the following steps:
1. Prepare the expansion base for disassembly as described in Section 7.3.
2. Remove the bottom cover assembly as...](http://img.usermanuals.tech/thumb/1258/38934/w64_compaq-lte-5000-263.png "Page 264
6. Remove the docking lever cover insert [3] as shown in Figure 7-40.
Reverse the above procedures to install the docking lever, docking lever
slider, or docking lever cover.
Chapter 7.20 Security Lock Bracket
The security lock bracket simply slides into its mounting seat on the side
of the expansion base. To remove and install the security lock bracket,
complete the following steps:
1. Prepare the expansion base for disassembly as described in Section 7.3.
2. Remove the bottom cover assembly as...")
b. Lift the rear of the puller plate [4] and continue to slide back while pulling the catch [3] out of the opening in the base. To install the puller plate assembly, press the docking aid [3] through the opening and slide the puller plate [1] into place (Figure 7-37). Reverse the previous procedure to install the docking mechanism. Be sure to use nylock screws for the docking bar and spring. Chapter 7.19 Docking Lever and Cover To remove the docking lever and cover, complete the following steps: 1. Prepare the expansion base for disassembly as described in Section 7.3. 2. Remove the bottom cover assembly as described in Section 7.5. 3. Remove the screw and washer that connects the docking bar to the slide block and docking lever (Figure 7-38).
4. The docking lever slider is now free to be removed [1] (Figure 7-39). Note that the little tab on one side of the docking lever slider [2] goes toward the outside of the expansion base at reassembly.
5. Remove the screws [1] and lift out the docking lever cover [2] (Figure 7-40).
6. Remove the docking lever cover insert [3] as shown in Figure 7-40. Reverse the above procedures to install the docking lever, docking lever slider, or docking lever cover. Chapter 7.20 Security Lock Bracket The security lock bracket simply slides into its mounting seat on the side of the expansion base. To remove and install the security lock bracket, complete the following steps: 1. Prepare the expansion base for disassembly as described in Section 7.3. 2. Remove the bottom cover assembly as described in Section 7.5. 3. Use a flat-blade screwdriver to pry the bracket straight up, or use a small pair of pliers to grasp the bracket and pull it out (Figure 7-41).
Chapter 8. Specifications Chapter 8.0 Introduction This chapter provides physical and performance specifications for the: o Computer o Display o Hard drives o Diskette drive o CD-ROM drive o Battery packs o MultiBay Expansion Base o MultiBay ISA Expansion Base This chapter also includes: o System interrupts o System DMA o System I/O address o System memory map Chapter 8.1 Computer Specifications Table 8-1. Computer Specifications =========================================================================== U.S. Metric =========================================================================== Dimensions: Height 2.13 in 5.42 cm Depth 9.06 in 23.00 cm Width 12.20 in 31.00 cm --------------------------------------------------------------------------- Weight: 510 CSTN 7.1 lb 3.23 kg 810 CTFT 7.3 lb 3.32 kg 810 CSTN 800 x 600 7.5 lb 3.39 kg 810 CTFT 800 x 600 7.4 lb 3.35 kg 1350 CTFT 800 x 600 7.4 lb 3.35 kg 2160 CTFT 1024 x 768 7.4 lb 3.35 kg --------------------------------------------------------------------------- Standalone (Battery) Power Requirements: Nominal Operating Voltage 12 VDC
Maximum Operating Power 15 W Peak Operating Power 25 W --------------------------------------------------------------------------- AC Adapter Power Requirements: Rated Voltage 100-200 VAC RMS Operating Voltage 90-240 VAC RMS Operating Current 0.4 - 0.8 A RMS Operating Frequency Range 47 to 63 Hz AC Maximum Transient 1kV for 50 ns --------------------------------------------------------------------------- Automobile Adapter DC Input Requirements: Operating Voltage 10 to 24 VDC Operating Power 30 - 40 W --------------------------------------------------------------------------- Temperature: Operating 50 to 95oF 10 to 35oC Nonoperating -4 to 140oF -20 to 60oC --------------------------------------------------------------------------- Relative Humidity (noncondensing): Operating 10 to 90% 10 to 90% Nonoperating (tw = 38.7 C max) 5 to 95% 5 to 95% --------------------------------------------------------------------------- Altitude: Operating 0 to 10,000 ft 0 to 3.15 km Nonoperating 0 to 30,000 ft 0 to 9.14 km --------------------------------------------------------------------------- Shock: Operating 10 G, 11 ms, half sine Non operating 240 G, 2 ms, half sine --------------------------------------------------------------------------- Vibration: Operating 0.5 G Nonoperating 1.5 G --------------------------------------------------------------------------- NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The LTE 5000 operates well within this range of temperatures. =========================================================================== Chapter 8.2 Display Specifications Table 8-2. 10.4 inch Color TFT SVGA Display =========================================================================== U.S. Metric =========================================================================== Dimensions: Height 6.24 in 15.84 cm Width 8.32 in 21.13 cm --------------------------------------------------------------------------- Number of Colors 256, 32K, 64K --------------------------------------------------------------------------- Contrast Ratio 100:1 --------------------------------------------------------------------------- Brightness 70 CD/M-2 @ 4.3 mA --------------------------------------------------------------------------- Pixel Resolution Pitch 0.264 x 0.264 mm Format 800 x 600
Configuration RGB Stripe --------------------------------------------------------------------------- Backlight Edge Lit --------------------------------------------------------------------------- Character Display 80 x 25 --------------------------------------------------------------------------- Total Power Consumption 4.0 W =========================================================================== Table 8-3. 10.4 inch Color TFT VGA Display =========================================================================== U.S. Metric =========================================================================== Dimensions: Height 6.24 in 15.84 cm Width 8.32 in 21.12 cm --------------------------------------------------------------------------- Number of Colors 256, 32K, 64K, 16M --------------------------------------------------------------------------- Contrast Ratio 100:1 --------------------------------------------------------------------------- Brightness 70 CD/M-2 @ 4.3 mA --------------------------------------------------------------------------- Pixel Resolution: Pitch 0.33 x 0.33 mm Format 640 x 480 Configuration RGB Stripe --------------------------------------------------------------------------- Backlight Edge Lit --------------------------------------------------------------------------- Character Display 80 x 25 --------------------------------------------------------------------------- Total Power Consumption 3.8 W =========================================================================== Table 8-4. 11.3 inch Color TFT SVGA Display =========================================================================== U.S. Metric =========================================================================== Dimensions: Height 6.88 in 9.15 in Width 17.48 cm 23.24 cm --------------------------------------------------------------------------- Number of Colors 64K --------------------------------------------------------------------------- Contrast Ratio 100:1 --------------------------------------------------------------------------- Brightness 70 CD/M-2 @ 4.0 mA --------------------------------------------------------------------------- Pixel Resolution: Pitch 0.288 x 0.288 mm Format 800 x 600 Configuration RGB Stripe --------------------------------------------------------------------------- Backlight Edge Lit --------------------------------------------------------------------------- Character Display 80 x 25 --------------------------------------------------------------------------- Total Power Consumption 3.7 W ===========================================================================
Table 8-5. 12.1 inch Color TFT SVGA Display =========================================================================== U.S. Metric =========================================================================== Dimensions: Height 7.26 in 18.45 cm Width 9.68 in 24.6 cm --------------------------------------------------------------------------- Number of Colors 64K --------------------------------------------------------------------------- Contrast Ratio 100:1 --------------------------------------------------------------------------- Brightness 70 CD/M-2 @ 4.0mA --------------------------------------------------------------------------- Pixel Resolution: Pitch 0.3075 x 0.3075 mm Format 800 x 600 Configuration RGB Stripe --------------------------------------------------------------------------- Backlight Edgelit --------------------------------------------------------------------------- Character Display 80 x 25 --------------------------------------------------------------------------- Total Power Consumption 3.9 W =========================================================================== Table 8-6. 12.1 inch Color TFT 1024x768 Display =========================================================================== U.S. Metric =========================================================================== Dimensions (Active area): Height 7.26 in 18.43 cm Width 9.68 in 24.58 cm --------------------------------------------------------------------------- Number of Colors Panel: 256K System: 256 --------------------------------------------------------------------------- Contrast Ratio 100:1 --------------------------------------------------------------------------- Brightness 70 CD/M-2 @ 5.0mA --------------------------------------------------------------------------- Pixel Resolution: Pitch 0.24 x 0.24 mm Format 1024 x 768 Configuration RGB Stripe --------------------------------------------------------------------------- Backlight Single CCFL/Sidelit --------------------------------------------------------------------------- Character Display 80 x 25 --------------------------------------------------------------------------- Total Power Consumption 4.5 W =========================================================================== Table 8-7. 11.3 inch Color DSTN SVGA Display =========================================================================== U.S. Metric =========================================================================== Dimensions: Height 6.80 in 9.07 in
Width 17.28 cm 23.04 cm --------------------------------------------------------------------------- Number of Colors 256 --------------------------------------------------------------------------- Contrast Ratio 25:1 --------------------------------------------------------------------------- Brightness 70 CD/M-2 @ 6.0 mA --------------------------------------------------------------------------- Pixel Resolution: Pitch 0.288 x 0.288 mm Format 800 x 600 Configuration RGB Stripe --------------------------------------------------------------------------- Backlight Edge Lit --------------------------------------------------------------------------- Character Display 80 x 25 --------------------------------------------------------------------------- Total Power Consumption 3.8 W =========================================================================== Table 8-8. 10.4 inch Color DSTN VGA Display =========================================================================== U.S. Metric =========================================================================== Dimensions: Height 6.24 in 15.84 cm Width 8.32 in 21.13 cm --------------------------------------------------------------------------- Number of Colors 256, 32K, 64K --------------------------------------------------------------------------- Contrast Ratio 20:1 --------------------------------------------------------------------------- Brightness 70 CD/M-2 @ 4.0mA --------------------------------------------------------------------------- Pixel Resolution: Pitch 0.288 x 0.288 mm Format 640 x 480 Configuration RGB Stripe --------------------------------------------------------------------------- Backlight Edgelit --------------------------------------------------------------------------- Character Display 80 x 25 --------------------------------------------------------------------------- Total Power Consumption 3.8 W =========================================================================== Chapter 8.3 Hard Drive Specifications Table 8-9. Hard Drive Specifications =========================================================================== 510 MB 810 MB 1.35 GB 2.16 GB =========================================================================== Capacity per Drive 524 MB 808.2 MB 1.35 GB 2.16 GB --------------------------------------------------------------------------- Drive Type 65 65 65 N/A --------------------------------------------------------------------------- 2.5 inch Form Factor Yes Yes Yes Yes ---------------------------------------------------------------------------