Home > Compaq > Notebook > compaq contura 400 family User Manual

compaq contura 400 family User Manual

Add to Favourites
    Download as PDF

    Here you can view all the pages of manual compaq contura 400 family User Manual. The Compaq manuals for Notebook are available online for free. You can easily download all the documents as PDF.

    Overview View all the pages Comments

    Page 151

    Page 151 12. While holding the end of the display cable inside the ZIF connector slide, press down both ends of the slide simultaneously to secure the cable in the ZIF connector (Figure 3-100). 
    12. While holding the end of the display cable inside the ZIF connector
slide, press down both ends of the slide simultaneously to secure the
cable in the ZIF connector (Figure 3-100).

    Page 152

    Page 152 13. Ensure that the cable has been seated evenly and that the white line on the cable is level. 14. Replace the keyboard assembly (Section 3.7). Chapter 3.23 Color STN (9.5 inch) Display (Models 400 and 410) IMPORTANT: The Monochrome, CSTN and the CTFT displays have different removal and replacement procedures. Be sure to follow the procedures for the specific display. This sections contains removal and replacement procedures for the following CSTN (9.5 inch) display components: o Display panel o... 
    13. Ensure that the cable has been seated evenly and that the white line
on the cable is level.
14. Replace the keyboard assembly (Section 3.7).
Chapter 3.23 Color STN (9.5 inch) Display (Models 400 and 410) 
IMPORTANT: The Monochrome, CSTN and the CTFT displays have different
removal and replacement procedures. Be sure to follow the
procedures for the specific display.
This sections contains removal and replacement procedures for the
following CSTN (9.5 inch) display components:
o Display panel
o...

    Page 153

    Page 153 Removing the CSTN (9.5 inch) Panel, Shield, Display Cable, and the Display Ground Cable To remove the liquid crystal display CSTN (9.5 inch) panel, the shield, the display cable and the display ground cable, follow these steps: 1. Disconnect all power from the computer and remove the AC Adapter and battery pack (Section 3.2). 2. Open the computer. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION >>>>>> 
    Removing the CSTN (9.5 inch) Panel, Shield, Display Cable, and the Display
Ground Cable
To remove the liquid crystal display CSTN (9.5 inch) panel, the shield, the
display cable and the display ground cable, follow these steps:
1. Disconnect all power from the computer and remove the AC Adapter and
battery pack (Section 3.2).
2. Open the computer.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION >>>>>>

    Page 154

    Page 154 6. Disconnect the display ground cable [1] from the LIF clip above the serial port connector (Figure 3-102). 
    6. Disconnect the display ground cable [1] from the LIF clip above the
serial port connector (Figure 3-102).

    Page 155

    Page 155 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION >>>>>> 
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION >>>>>>

    Page 156

    Page 156 135-degrees (Figure 3-103). >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION >>>>> 
    135-degrees (Figure 3-103).
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION >>>>>

    Page 157

    Page 157 12. Carefully remove the CSTN (9.5 inch) panel, display cable, and shield from the display enclosure (Figure 3-105). 
    12. Carefully remove the CSTN (9.5 inch) panel, display cable, and shield
from the display enclosure (Figure 3-105).

    Page 158

    Page 158 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION >>>>> 
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION >>>>>

    Page 159

    Page 159 14. Lay the CSTN (9.5 inch) panel face down on a clean surface. 15. Slide the display shield off the CSTN (9.5 inch) panel (Figure 3-107). 
    14. Lay the CSTN (9.5 inch) panel face down on a clean surface.
15. Slide the display shield off the CSTN (9.5 inch) panel (Figure 3-107).

    Page 160

    Page 160 16. Disconnect the display cable from the connector on the back of the CSTN (9.5 inch) panel (Figure 3-108). 
    16. Disconnect the display cable from the connector on the back of the
CSTN (9.5 inch) panel (Figure 3-108).
    Start reading compaq contura 400 family User Manual

    Related Manuals for compaq contura 400 family User Manual

    All Compaq manuals