Comdial Unisyn System Manual

							Station Programming3.7.27 Prime Line-Prime Group
And Prime Intercom
Description:If you assign a group of lines, an intercom line, or one individual line to a particular station for use as its
prime line, the station automatically selects that line for use when the user takes it off-hook.Single line
telephones must have either line groups or intercom already programmed.
Default = Prime Intercom (All LEDs = On)
To Program:1.Dial 53 “STATION FEATURES”
2.Dial 15 “PRIME LINE ”
3a.Assign prime 1ine”PRIME LINE XX”
Line port l- 6 = Dial 01 - 06 or press Bl - B6
3b. Assign prime group, Dial 51-54 for groups l-4 “‘PRIME LINE GRP X”
3c.Assign prime intercom, Dial 50 for intercom line “PRIME INTERCOM”
4.Select station ports (LED On = Feature Assigned): Station 10 - 25, Dial 10 - 25 or press Al - Al6
5.Dial %K for next prime line, group, or intercom assignment,
-OR-
Press * X for next station feature,
-OR-
Press 46 ++ % for configuration mode.
6.To change setting, repeat procedure and make different selection.3.7.28 Message Wait Originate
Description:Any station that you program with this feature can control the message waiting light at other stations in the
system.When a station user sees his or her message waiting light on, he or she can press ITCM HOLD to
call the station that activated the light.
Default = Feature enabled (Al-Al6 LEDs = On)
To Program:1. Dial 53 “STATION FEATURES”
2.Dial 06 “MSG. WAIT ORIG. ”
3.Select station ports (LED On = Feature Enabled): - Station 10 - 25, Dial 10 - 25 or press Al - Al6
4.Dial +K for next station feature,
-OR-
Dial +K f for configuration mode.
5.To change setting, repeat procedure and make opposite selection.
3-31 
						

							Station ProgrammingIMI6&I123.7.29 Ringing Line Preference
Description:When you assign this feature to a station, that station will automatically answer a ringing line when its user
goes off-hook. The ringing line shows as an orange LED (only when you have canceled 
Ringing Line
Preference).IST ports must have ringing line preference assigned.
NOTE: Without Direct Ringing assigned, Ringing Line Preference will only function on transferred calls.
Default = Feature enabled (Al-Al6 LEDs = On)
To Program:1. Dial 53 “STATION FEATURES”
2.Dial 09 “RING LINE PREF. ”
3.Select station ports (LED On = Feature Selected): Station 10 - 25, Dial 10 - 25 or press Al - A16
4.Dial +K for next station feature,
-OR-
Dial +K % for configuration mode.
5.To change setting, repeat procedure and make opposite selection.
3.7.30 Voice Announce Blockina
Description:This feature allows a proprietary station user to block voice signaled intercom calls.
Default = Not assigned (Al-Al6 LEDs = Ojjj
To Program:1.Dial 53 ‘STATION FEATURES”2. Dial 04 “VOICE BLOCK 
”
3.Select station ports to be programmed: Station 10 - 25, Dial 10 - 25 or press Al 416
4.Dial C% for next station feature,
-OR-
Dial % +I+ for configuration mode.
3-32 
						

							IMI66-112Station Programming
3.8 Button Mapping
(Non-Square System
Configuration)
Description:You can assign (map) every programmable “A- field” and “B-field” button at each station to be direct
station select (DSS) buttons that provide quick access to system stations, to be special purpose buttons that
:;provide telephone users one-button access to features, or to be idle buttons that provide autodial locations,..‘., 2‘:i I’ ;for the station user.You can also assign B-field buttons to be line select buttons that provide access to‘. 1outside lines.
When you map a button at a station port, press the corresponding button on the programming station to
select the button to be mapped.
If you must map buttons at a station port while using a programming
,telephone that does not provide a full complement of buttons, you can dial a 3-digit code to select the
buttons to be mapped.
Use the following chart for mapping from an IST telephone.
NOTE: Only put line buttons at B-field locations.
Bl=100Al =120B2
=101A2=118B3
=102A3=116B4
=103A4=114
B5=104A5=112B6
=105A6=110
A7 =
108
A8 =121
A9=119A10
=117All
=115Al2
=113Al3
=111Al4
=109Al5
=122Al6
=123
Default: B Field = Line Buttons, A Field = DSS Buttons3.8. I Automatic Call-Back Button
Description:When a user presses this button after he or she encounters a busy tone, the system will automatically ring
both the called station and the user’s station when the called station becomes idle.
To 
Program:1.Dial 56 “BUTTON MAPPING”2. Dial 10 “ASSIGN 
CALL BACK”
3.Select button to be programmed: Press Al - A16, Bl - B6
4.Select station ports to be programmed with CALL-BACK button: Station 10 - 25, Dial 10 - 25or press Al -Al6
5.Dial G# for next auto call-back button assignment,
-OR-
Dial % +#+ for next button mapping feature,
-OR-
Dial +i+ t # for configuration mode.
3-33 
						

							IMI66-1123.8.2 Blank Buttons
Description:Blank those buttons that you want to be speed dial buttons.NOTE:
When blanking buttons, be sure a previously assigned button is idle (feature not selected by user) before
you blank it.
To Program:1.Dial 56 “‘BUTTON MAPPING”
2. Dial 
04 ‘BLANIUAUTODIAL.”3.Select button(s) to be cleared: Press Al 
- A16, Bl - B6
4. Dial#5.Select station ports to be programmed with this blank button assignment: Station 10 
- 25,Dial 10 
- 25 or press Al-Al6
6.Dial 
+K for further button blanking,
-OR-Dial 
+K + for next button mapping feature,
-OR-Dial 
+K GK +I+ for configuration mode.
3.8.3 Call Forward Button
Description:This button provides one-button forwarding of all calls to another extension.
To Program:1.Dial 56 “BUITON MAPPING”
2.Dial 11 ‘ASSIGN CALL FWD ”3.Select button to be programmed: Press Al 
- A16, Bl - B6
4.Select station ports to be programmed with a CALL 
??WD button: Station 10 - 25, Dial 10 _ 25or press Al-Al6
5.Dial 
% for next call forward button assignment,
-OR-Dial 
% +K for next button mapping feature,
-OR-Dial 
+#+ +K t for configuration mode.
3-34 
						

							IMI66112Stfztion Programming3.8.4 Do Not Disturb (DND) Button
1:.  . :
Description:Pressing the DND button prevents other stations from ringing the DND station.
To Program:1.Dial 56 “BUTTON MAPPING ”
2.Dial 07 ‘ASSIGN DND CODE ”
3.Select button to be programmed: Press Al - A16, Bl - B6
4.Select station ports to be programmed with a DND button: Station 10 - 25, Dial 10 - 25 or pressAl-Al6
5.Dial A+ for further DND button assignment,
-OR-
Dial +K +K for next button mapping feature,
-OR-
Dial +K % # for configuration mode.3.8.5 
DSS/BLF Button
Description:DSS buttons provide quick access to system stations ‘and their lights and show the busy status of the
monitored stations.To Program: 1.
2.
3.
4.
5.
6.
7.
8.Dial 56 
“BUTTON MAPPING”
Dial 03 “ASSIGN 
DSUBLF”
Select button to be programmed: Press Al - A16, Bl - B6,
Select station port to be assigned:Station 10 - 25, Dial 10 - 25 or press Al-Al6
Repeat steps 3 and 4 until al1 ports are assigned
Dial #
Select station 
ports to be programmed with this DSS/hutton assignment: Station 10 - 25, Dial 10 - 25or press Al 
- Al6
Dial +K for further DSS/button assignment,
-OR-
Dial +K +E for next button mapping feature,
-OR-
Dial % +# % for configuration mode.
3-35 
						

							Station ProgrammingIMI66-I12
3.8,6 Line Button
Description:
Line select buttons provide access to outside lines.To Program: 1.
Dial 56‘BUTTON MAPPING ”
2.Dial 02 “ASSIGN LINE”
3.Select button to be programmed:- Press Bl - B6,
4.Select line ports to be assigned.- Line port l- 6 = Dial 01 - 06 or Press Bl - B6
5.Repeat steps 3 and 4 until all lines are assigned
6.Dial # to finish button mapping
7.Select station port to be programmed: Station 10 - 25: Dial 10 - 25 or press Al-A16
8.Dial +K for further line/button assignment,
-OR-
Dial + #+ for next button mapping feature,
-OR-
Dial +i~ +I+ +K for configuration mode.
3.8.7 Line Group Button
Description:
This button provides one-button access to a line group.
To Program:1.Dial 56 “‘BUTTON MAPPING ”
2.Dial 13 “ASSIGN LINE GP”
3.Select button to be programmed: Press Al - A16, Bl - B6
4.Dial 1 - 4 for line group 1 - 4 “ASSIGN LINE GP X”
5.Select station ports to be programmed with GROUP button: Station 10 - 25, Dial 10 - 25 or pressAl-Al6
6.Dial % for next line group button assignment,
-OR-
Dial +C +C for next button mapping feature,
-OR-
Dial X % % for configuration mode.3.8.8 Line Group Queue Button
Description:
A station user can queue for a busy line by pressing a line group queue button.
To Program:1.Dial 56 “BUTTON MAPPING ”
2.Dial 15 “ASSIGN LINE GP Q”
3.Select button to be programmed: Press Al - A16, Bl - B6
4.Select station ports to be programmed with QUEXJE button: Station 10 - 25, Dial 10 - 25 or pressAl-Al6
5.Dial % for next line group queue button assignment,
-OR-
Dial +E +IC for next button mapping feature,
-OR-
Dial ?i+ % +I+ for configuration mode.
3-36 
						

							IMIH-112Station Programming
3.8.9 Dual Intercom Button
Description:You can assign a second intercom button to stations that may make many intercom calls.
To Program:1.Dial 56 “‘BUITON MAPPING ”
2.Dial 05 “ASSIGN 2ND ITCM ”
3.Select button to be programmed:- Press Al - A16, Bl - B6
4.Select station ports to be programmed with a second intercom button: Station 10 - 25, Dial 10 - 25or press Al-Al6
5.Dial +k for further intercom button assignment,
-OR-
Dial +& +K for next button mapping feature,
-OR-
,Dial ?-& +k +k for configuration mode.3.8.10 Privacy Release Button
Description:A user engaged in a private call can press the privacy button to change a private call into a non-private one.
To Program:1.Dial 56 “BUTON MAPPING ”
2.Dial 06 ‘ASSIGN PRIVACY ”
3.Select button to be programmed: Press Al - A16, Bl - B6
4.Select station ports to be programmed with a PRIVACY button: Station 10 - 25, Dial 10 - 25or press Al-Al6
5.Dial +k for further privacy release button assignment,
-OR-
Dial +K +K for next button mapping feature,
-OR-
Dial +K # f for configuration mode.
3.8.11 Save Button
8,’
Description:A telephone user can press the SAVE button to store the last dialed number for later redid.
To Program:1.Dial 56 “BUTTON MAPPING”
2.Dial OS “ASSIGN SA VE”
3.Select button to be programmed: Press Al - A16, Bl - B6
4.Select station ports to be programmed with a SAVE button: Station 10 - 25, Dial 10 - 25 or pressAl-Al6
5.Dial t for further Save button assignment,
-OR-
Dial +I+ % for next button mapping feature,
-OR-
Dial +I+ f +k for configuration mode.
3-37 
						

							Station ProgrammingIMI66-1123.8.12 Shift Button
Description:You can use a shift button to access autodial numbers that are programmed under DSS buttons. At default,
the shift button appears at the location of your 
DSS/BLF button.
To Program:1.Dial 56 “‘BUTON MAPPING ”2. Dial 18 “ASSIGN 
SHIFT
3.Select button to be programmed: Press Al - A16, Bl - B6
4.Select station ports to be programmed with a Shift button: Station 10 - 25, Dial 10 - 25 or pressAl-Al6
5.Dial +jC for next shift button assignment,
-OR-
Dial M +I+ for next button mapping feature,
-OR-
Dial +i+ +iC +iC for configuration mode.3.8.13Voice Announce Block Button
Description:Telephone users can block voice announced intercom calls by pressing this button (all call and zone paging
calls are not blocked).
To Program:1.Dial 56 “BUTON MAPPING “
2.Dial 14 “ASSIGN VA B”
3.Select button to be programmed: Press Al - A16, Bl - B6
4.Select station ports to be programmed with a Voice Announce Block button: Station 10 - 25,Dial 10 
- 25 or press Al-Al6
5.Dial % for next voice announce block button assignment,
-OR-
Dial * +K for next button mapping feature,
-OR-
Dial t t +I+ for configuration mode.3.8.14 Zone Page/All-Call Button
Description:This button will provide a station with one-button access to ah-call and zone paging.
To Program:1.Dial 56 ‘BUTTON MAPPING ”
2.Dial 09 ‘ASSIGN ZONE”
3.Select button to be programmed: Press Al - A16, Bl - B6
4.Dial 1 - 3 for zone 1 - 3 “ASSIGN ZONE X”
-OR-
Dial 4 for all-call‘ASSIGN ALL CALL ”
5.Select station ports to be programmed: Station 10 - 25: Dial 10 - 25, or press Al - Al6
6.Dial +K for further paging button assignment,
-OR-
Dial +# +C for next button mapping feature,
-OR-
,
Dial % +I+ # for configuration mode.
3-38 
						

							.  .  .I.:, :5.. I,.‘.
,
., ,.;.
IMI66-112
3.9 Voice Mail Interface +kVoice Mail--NOTE: The 
+K denotes that this feature is currently a future feature.
The Unisyn system supports the use of the Comdial proprietary voice mail system. In addition to the required
programming task of identifying the station ports as voice mail ports, there are several other programming
considerations associated with voice mail operation that are optional for use as needed.
NOTE: A lighted LED next to the programming button for the selection shows which choice you have selected.
When a single button provides a toggle 
(on/on action, the lighted LED indicates the active feature.
The first step in any programming sequence is to enter the base level.Once in this mode, you can dial the feature
code for any desired configuration. Enter the base level with the following procedure: press ITCM then dial
%# 7 4 6 X.The last step is to press the SPKR button to end the programming procedure and return the system to
normal operation.
3.9. IVoice Mail Port
Description:
To Program:When you connect the voice mail system to a station port, you must use this programming feature to enable
the station port as a voice mail port.
With its automatic attendant feature, the voice mail system automatically answers any line that is ringing at
a voice mail port. As a default, the system automatically enables ringing line preference for any port that
you have identified as a voice mail port. You must choose a ringing assignment for the lines that you have
assigned to the voice mail ports before the voice mail system can provide the automatic attendant feature.Default 
= None enabled (All LEDs = Offl
1.Dial 51 ‘PORT TYPE”
2. Dial 
08 “EXECUMAIL”
3.Select station ports to be programmed: Station 11 - 25, Dial 11 - 25 or press A2 - Al6
4.Dial + for next feature,
-OR-
Dial % %+ for configuration mode.
3-39 
						

							Voice MailIMI66-I123.9.2 Voice Mail Port-Direct Ringing
For Automatic Attendant Operation
Description:
With this feature, the voice mail system automatically answers any line that is ringing at a voice mail port.
You must choose a ringing assignment for the lines that you have assigned to the voice mail ports before
the voice mail system can provide the automatic attendant feature.Default 
= No direct ring (All LEDs = Off)To Program:1. Dial 54 
“STA/LINE CONFIG”2. Dial 1 
‘DIRECTRING”
3.Select line ports for direct ringing
Line port 
l- 6 = Dial 01 - 06 or press Bl - B6
4.Dial # when all line ports are selected
5.Select station ports to be programmed: station 1 I- 25, dial 11 - 25 or press A2 - Al6
6.Dial ++ when all station ports are selected
7.Dial 4~ +I+ for configuration mode.3.9.3 Voice Mail Port-Dela
For Automatic 
AttenJed Ringing
ant OperatronDescription:
You can program the voice mail port to delay ring to the automatic attendant.
Default = No delay ring (All LEDs = OjjJ
To Program:1.Dial 54 ‘STA/LINE CONFIG. ”2. Dial 2 ‘DELAYRING 
”
3.Select line ports for delayed ringing
Line port 
l- 6 = Dial 01 - 06 or press Bl - B6
4.Dial # when all line ports are selected
5.Select station ports to be programmed: station 1 l- 25, Dial 11 - 25 or press A2 - A16
6.Dial +I+ when all station ports are selected
7.Dial +I+ +E for configuration mode.
3-40