Comdial Unisyn System Manual

iiiZ%is yn
Telephone System,
System Manual
s publication is applicable to the
following common equipment:
Model TO308 Rev. A and later
Model TO616 Rev. A and later
Model 
TO3084NT Rev. A and later
Model 
TO616-INT Rev. A and later
COMDIAL
Made&m in the USA 

n!fI66-112Table Of Contents
u
Table Of Contents
1.Introducing The Unisyn System
1 .l Using This Bookl-l
1.2Using Related Publications1.3 Getting To Know The Unisyn System
1.4 Understanding The Hardware l-4
1 SKnowing The General Specifications1.6 Seeking Technical Assistance l-12l-2
l-2l-10
2, lnstallitw The Unisyn
2.1
Using Chapter Two 2- 12.2 Using The Right Tools2-l
2.3Instahing The Cabinet 2-2
2.4Connecting The Power 2-4
2.5Connecting The Lines 2-8
2.6Connecting The Stations2-12
2.7Instalhng System...

Table Of ContentsIMI64-112
3, Programming The System
3.1Using ChapterThree
3- 1
3.2UnderstandingHow ToProgram3-13.3 Understanding System Programming
3.4 Master Clearing and System Defaults
4IProgramming Records 4-I3.5 ‘Programming The System
3.6 Programming The Lines
3.7 Programming The Stations
3.8ButtonMapping3-33
3.9Voice Mail3-393.10 Toll Restriction Programming
3.11 
Prog-ramming Reference Chart
3.12 Feature Code Numbering Plan
5. System Features5-1
3-6
3-14
3-19
3-44
3-48
3-493-3
3-4
6m /ndex6-I
iv 

IMI66-112System Overview
Introducing The Unisyn System-
.:1. I Using This Book
This manual for the Unisyn telephone system, IMI66112, provides step-by-step instructions for installing and
programming the system. We have designed the manual with you, the installer/programmer, in mind, and we have
tried to “walk you through” all of the steps needed to fully install and program the system.If 
you, are unsure about
installing the system, read through this book 
~lt leasr once before you begin any...

System OverviewIMI44-1121.2 Usina Related Publications
We have not included some information, such as general user information, in this publication, but you can find such
information in the following related publications.
1.2.1 General Information
.IMI 01-001 Compliance Requirements To FCC Rules and Regulations Part 68 and 15.
IMI 01-005 Handling Of Electrostatically Sensitive Components
,1.2.2 User Information
l
GCA 70-293LCD Speakerphone System User’s Guidel 
GCA70-296 Station User’s Guide
l...

IMIH-112System Overview
(, !
.  .
..’-..... .j
Optional PA
Industry-standard
non-electronic telephone
(Power fail interface)
Typical printer
UNISOll
Typical fax machine
Typical
answeringmachine
Typical
station
Typical personal computer
(For remote database upload/download)
* Means YOU must have an IST board. (If YOU have TXIST board installed either the bridged IST or
stand alone IST can be used for power fail.)
* * Means you must have au RS232 board instahed.
Figure 1.1 System Optionsl-3 

System OverviewIMI66-112
1.4 Understanding The Hardware
Each Unisyn system has the following hardware capabilities:l
Common Equipment cabinet. Each common equipment unit is full featured for basic operation.l
Optional Feature Enhancement Circuit Boards (IST Board, Ring Generator, Message Wait Generator, Call
Metering Board, RS232 Board)l
Telephones. All currently produced Unisyn telephones will work on the TO308, TO616, T0308-INT,
and 
TO616-INT.1022%xx
1122s-xx
1122x-xXl
Optional Battery Backup (BBUOI,...

IMICitS-112System Overview
TO308
23 314’,
-
12 l/4”
a0
“NW12 
l/4” ,
a0
Figure 1.2 Common Equipment Cabinets
l-5 

System OverviewIMA%-I121.4.2 Understanding The Options Boards
You can add any or all of the optional boards into the Unisyn system.The following list describes each board and
its function. Refer to 
Figure 1.3 for board installation locations.l
The Unisyn Industry Standard Telephone (TXIST) Board-makes the system compatible with IST devices
in addition to proprietary telephones. Adding a TXIST board changes the station ports from proprietary only to
universal ports-universal ports support both...

System Overview
:..
,TX232
Board
TXFNG
*Jumpers 2Metering
Board 1Board 2
1  
TXCMX-16; TXCMX-12 1
(International Only)
NOTE: You must remove the jumpers next to the corresponding TXIST and TXCMX board upon instillation.
The board will not function with the jumpers installed.
Figure 1.3 Optional Boards (TO616 shown)l-7