Comdial Dxp Plus Digital Communications System Instructions Manual

6.9.7TI--El Siatus ReportingDescription:
Use the following instructions to enable the Tl--El status reporting feature. Use the Section
6.13.2 procedure to program the status reporting and alarm alarting parameters.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select system and press ENTER.
3. From system menu, select system parameters and press ENTER.
4. From system parameters menu, select Tl--El status reporting and press ENTER.
5. Press SPACE bar for feature setting.
6. When...

lMl66-123DXP Plus Programming Instructions
6.9.9Central Message DeskDescription:
Use this procedure to designate one station as the central message desk to take messages for
other system stations, control the message waiting light at those stations, and deliver messages
to their users upon request.NOTE: Do not assign this feature to voice 
mail station ports since it activates only one port and
inhibits all other station ports from having message wait originate capability.
Programming:1. Press CONTROL T...

6.9.12/ST Ring Frequency
Description:The system will allow you to set a ring frequency of 25 Hz for international applications or set a
ring frequency of 21 Hz for domestic applications. Choose a setting that matches the ring
frequency of the installed ring generator.
Programming:1.Press CONTROL T for main menu.
2.From main menu, select system and press ENTER.
3.From system menu, select system parameters and press ENTER.
4.Select IST ring frequency from the system parameters and press ENTER.
5.Press...

lMl66-123DXP Plus Programming Instructions
6.9.14Line Disconnect Automatic Camp-OnDescription:
If a user at a current station selects a line that a previous station has released from busy but the
system has not yet returned to idle, the system arranges for the current station to camp-on to the
line before the system makes the line idle. After the system makes the line idle, it immediately
connects the camped-on station to the line. With this feature disabled, a station can not select a
line until after...

DXP Plus Programming Instructions/M/66-123
6.9.15Automatic Station RelocationDescription:
The system will automatically recognize a particular station should someone relocate it to a
different station port. After being installed at a new port location, a relocated station will
provide the same class of service parameters and station features that it provided at its original
port location. Also, the relocated station will respond to the same personal intercom number that
it responded to at its original...

lM166-123DXP Plus Programming Instructions
6.9.16Defaulf Relocaiion ResponseDescription:
When someone relocates a digital telephone from one station port to another port, the relocated
telephone prompts the user to take action to determine the station parameters. The user can
either accept the parameters from the station’s original port or accept those from the new port.
He or she has 10 seconds to make the choice. If the user takes no action, the station assumes the
parameters determined by this...

DXP Plus Programming InstructionslMl66-123
6.9.18Day I, Day2, and Night Ringing Begin and End TimesDescription:
With this programming procedure, set the begin and end times of the day 1, day 2, and night
ringing time periods.Also refer to 
Section 7.2.13 for related flexible ringing assignment
programming.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select system and press ENTER.
3. From system menu, select system parameters and press ENTER.
4. From the system parameters menu, select...

/M/66-123DXP Plus Programming Instructions
6.9.19Services DTMF Highway
Description:The DXP Plus system allows the use of on-premise industry-standard telephones. To support
the DTMF dialing of these industry standard telephones, the services board provides on-board
DTMF receiver circuitry. This circuitry supports dialing of one industry-standard telephone at a
time. If you intend to support a population of industry-standard telephones that will generate a
large volume of outgoing call traffic, you must...

6.10Paging Programming (Paging Zones)
6.10.1Zone Programming
(Zone Names, Transmit Stations, Receive Stations)Description:
Use this programming procedure to arrange stations to transmit and receive voice
announcements, to and from a particular group of stations or to all stations in the system. Also
use this procedure to assign names to paging zones when a site requires named zones.
Programming:To place stations in paging zones and name the zones, use the following procedure.
1.Press CONTROL T for main...

/M/66-123DXP Plus Programming Instructions
6.10.3Paging TransmitDescription:
Use this procedure to give a class of service of stations the ability to transmit voice
announcements to one or all other station monitor speakers. Also refer to Section 
6.10.2.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From the COS programming menu,...