Comdial Dxp Plus Digital Communications System Instructions Manual

lMl66-123DXP Plus Programming Instructions
7.1.11Do Not Disturb ProgrammingDo Not Disturb Inhibit
Description:
This feature prevents a station from entering the do-not-disturb mode of operation.Programming:
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS programming menu, type item number for feature and press ENTER.
6. Press SPACE bar...

7.1.12Exclusive Hold
Description:When you enable this feature, it prevents a telephone user at one station from picking up a call
that someone placed on hold at another station.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS programming menu, type item number for feature and press ENTER.
6. Press SPACE bar for feature...

/M/66-123DXP Plus Programming Instructions
7, 1.14Idle Line Programming
Idle Line PreferenceDescription:
With you enable this feature, a station automatically connects to an idle line when the user lifts
the telephone’s handset.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. Fro COS programming menu, type item number for feature and...

DXP Plus Programming InstructionslMl66-123
7.1.15/ST Distinctive RingingDescription:An industry-standard telephone can sound one ring cadence for intercom calls and a different
ring cadence for outside calls or it can sound the same ring cadence for both types of calls. You
must select one of these ringing styles on a station class of service basis. All industry-standard
telephones with the same class of service have the same ringing style. See Section 7.2.35 for
other industry-standard telephone...

/M/66-123DXP Plus Programming Instructions
7.1.17Meet Me Answer PageDescription:
When you enable this feature at a station, its user can dial a code in response to an all-call or
zone page and meet the pager in a private conversation.
Programming:1~ Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS programming menu, type item number for...

DXP PIUS Programming /nstructionslMl66-123
7.1.20Music On Intercom Hold (Music Or Tone On Hold)
Description:
Programming:
With this feature enabled, the system supplies music, tone bursts or other audio information to
callers while they are on hold. The music or information source is external to the common
equipment and is customer supplied. Since the system accepts two music sources, you can use
one source for this feature and the other source for the background music feature discussed in
Section...

/M/66-123DXP Plus Programming Instructions
7.1.21Paging Receive
Description:Use this procedure to give a class of service of stations the ability to receive voice
announcements with the station handset and monitor speaker. For other paging requirements,
refer to Section 6.10.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS...

7.1.23Ringing Preference (Ringing Line Preference)
Description:When you enable this feature, a station can automatically connect to a ringing line when a user
takes his or her telephone off-hook. Refer to 
Section 7.2. I3 for other ringing considerations.
Programming:1. Press CONTROL T for main menu.
2. From the main menu, select stations and press ENTER.
3. From the stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From the COS programming...

/M/66-123DXP Pius Programming Instructions
7.1.25Day Restriction Level/Night Restriction LevelDescription:
Use restriction level programming (Section 11.4) to create as many as eight different toll calling
categories based on the freedom to dial various numbers or the restriction from dialing them.
You can assign one of eight different restriction (1-8) levels or assign an “‘allow all” level or a
“‘deny all” level. Level 
8 is the least restrictive from a station viewpoint but the most restrictive
from a...

7.1.27Station Monitoring
Description:When you enable this feature, the busy lamp field (BLF) light of an associated direct station
select select (DSS) button provides a visual indication of idle, busy, and ringing status of the
station it represents. A station user can press this DSS button to make a one-button pick-up of a
ringing station. When you disable this feature, the BLF shows only idle and busy conditions of
the DSS station.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select...