Comdial Dxp Plus Digital Communications System Instructions Manual

7.2.13Flexible Ringing Assignments
Program ringing assignments on a per station/per line/per intercom number basis.
Ringing can be immediate,
delayed, or special purpose. Use the procedures in this section to customize the ringing features for the system. If
needed, use the Section 6.10.7 procedure to arrange for a relay to track the ringing of the direct, delayed, day 1,
day 2, or night ringing modes (use Section 
6.9.18 to program these ringing modes). plus, if your installer connects
customer-supplied...

DXP Plus Programming Instructions/M/66-123
Day 1 Ring
Description:Use this procedure to choose the line ports that you want to ring at stations during the day 1
ringing mode time period. Refer to the paragraph below titled, Day 1, Day 2, and Night
Ringing Begin and End Times, to set the beginning and ending times of this ringing.
Programming:1.Press CONTROL T for main menu.
2.From main menu, select stations and press ENTER.
3.From stations menu, select station programming and press ENTER.
4.Type personal...

Day 1, Day 2, And Night Ringing Begin And End TimesDescription:
With this programming procedure, set the begin and end times of the day 1, day 2, and night
ringing time periods.Programming:
1 D Press CONTROL T for main menu.
2. From main menu, select system and press ENTER.
3. From system menu, select system parameters and press ENTER.
4. From the system parameters menu, select day 1, day 2 or night ringing begin times
and press ENTER.
5. Type times in 24-hour format (hhmm) and press ENTER.
6. Press...

Caller ID Ring No-Answer (RNA)
Description:This feature offers telephone users the ability to review calls that ring at their stations while
they are away. The system stores caller ID RNA records and allows users to review them and
use one-button dialing to return those calls that need returning. The feature also denotes the
identification of the last station that reviewed the records thus helping prevent multiple call
backs to the same number. After users review the caller ID RNA records, the system...

Personalized Ringing Tone
Description:Program a station to ring in one of several distinctive tones for proprietary digital telephones
and in one of four distinctive tones for analog telephones. While industry-standard telephones
do not provide personalized ringing, you can set distinctive ringing for them using the Section
7.2.35 procedure.
Programming:1~ Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select station programming and press ENTER....

7.2.15Service Observable (Service Observing)
This feature allows a station to enter an in-progress call in an unannounced, muted mode to monitor the
conversation Use this procedure to give a station service observe capability and make other stations available for
service observing.Initiating Service Observe
Description:Allow a station to perform a service observe operation.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select...

/M/66-123DXP Pius Pfogfamming Instructions
7.2.16Day Exception Number/Night Exception Number
Description:Exception numbers allow stations to dial numbers that they are not normally allowed to dial by
their automatic route selection/toll restriction levels. If the toll restriction table exception
number matches one of the exception numbers that you assign to the station using the following
procedure, the station is allowed to dial the number.
The exception number values that you can assign are 1 through...

7.2.18SOHVA Groups
Description:SOHVA calling groups control the pattern in which station ports receive and/or originate
SOHVA calls to one another. You must first form the SOHVA groups (Section 6.5.3) and then
assign the groups to individual stations with the following procedure.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name...

/M/66-123DXP Plus Programming Insfrwetions
7.2.20Pick-L/x, Grcxms
Description.=Use this procedure to place a number of stations in a call pick-up group so that one station can
answer a call ringing at any other station in the group.
Programming:1 D Press CONTROL T for main menu.
2. From the main menu, select stations and press ENTER.
3. From the stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name and press ENTER.
5. From station...

7.2.22Single Line TAP (Single Line Proprietary Telephone TAP Button)Description:
Use this procedure to set the function of the TAP button on single line proprietary telephones.
Programming:1.Press CONTROL T for main menu.
2.From main menu, select station and press ENTER.
3.From station menu, select station programming and press ENTER.
4.Type personal intercom number or previously assigned name of station being programmed
and press ENTER.
5.From station programming menu, type item number for feature and...