Comdial Dxp Plus Digital Communications System Instructions Manual

8.1.6SMDR RecordDescription:
When you enable this feature, the system stores SMDR records for the specified line. Refer to
Section 10 for other SMDAISMDR programming considerations.Programming:
1. Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From lines menu, select line programming and press ENTER.
4. Type line port number (l-240) or name and press ENTER.
5. From line programming, type item number for feature and press ENTER.
6. Press SPACE bar for feature setting....

/M/66-123DXP Plus Programming fnstructions8.1.8
Pad Level-Transmit, Receive
(Gain And Attenuation Settings For Line Transmit And Receive)
Description:This feature enhances the Tl-El digital carrier transmission option, the pad level programming
feature adjusts voice levels for both the transmit and receive circuits in the individual channels.
The choices include: Gain 2, Gain 1, Nominal, Loss 1, Loss 2, Loss 3, Loss 4, and Loss 5.
These settings provide an approximate +6 to -15 dB range of choices....

8.1.9Dialing Mode
Description:Program the line port to match either a DTh4F tone or a rotary (pulse) dialing line as supplied
by the central office (CO).
Programming:1. Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From lines menu, select line programming and press ENTER.
4. Type line port number (l-240) or name and press ENTER.
5. From line programming menu, type item number for feature and press ENTER.
6. Press SPACE bar for feature setting and press ENTER to accept...

8.1.10Abandon Hold ReleaseDescription:
When a distant party abandons a hold condition and his or her station disconnects from the line,
the central office sends a forward disconnect signal to the system. This signal is either 50 or
350 msec. in length. Use this procedure to program the line port to match the central office
signal length.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From lines menu, select line programming and press ENTER.
4. Type line...

DXP Plus Programming Instructions/M/66-123
8.1.12 Toll Groups
Description:You must identify the individual lines that you do not want users to use when they dial toll
restricted numbers. Do this by first assigning the lines to toll groups and then assigning those
toll groups to the restricted number. There are 32 toll groups available for line assignment.
Assign one, several, or all lines to any desired toll group or combination of toll groups as
needed. See Section II for complete toll restriction...

/M/66-123DXP Plus Programming Instructions
8.1.15Disconnect SupervisionDescription:
When you enable this feature, the system detects a break in loop current anytime one occurs
during an outside call.
Programming:1 a Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From lines menu, select line programming and press ENTER.
4. Type line port number (l-240) or name and press ENTER.
5. From line programming menu, type item number for feature and press ENTER.
6. Press SPACE...

8.1.17Voice Mail ID
Description:
Programming:
8.1.18DISA And DISA Voice Options
You can assign an identification number to each line so that the voice mail system can provide
customized call handling on a per line basis. Use voice mail system programming to match this
ID number to a particular personal directory or transaction box within the voice mail system.
When the DXP 
Plus routes a call that is ringing at a particular line to the voice mail system to
be answered, it routes it with the ID number....

8.2Line Group Programming
Description:Use this procedure to group similar type line ports together for dial-up access. Up to 16
different line groups are available. During operation, the system searches for an idle line in the
line group in the same order that you program them using this procedure.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From lines menu, select line group programming and press ENTER.
4. Type line group number (1-16) and press...

8.3Copy Model Line (Block Programming, Line)Description:
Program some or all line ports to have the same programming as a model line port.
Programming:1. Press CONTROL T for main menu.
2. From the main menu, select lines and press ENTER.
3. From the lines menu, select model line and press ENTER.
4. Type line port number (l-240) or name of model line to be copied
and press ENTER.
5. Type line port numbers of lines to match model and press ENTER.
(Type line port numbers as n,n,nn or n-nn. )
6. Press ESCAPE...

/M/66-123DXP Plus Programming Instructions
8.4Dire& Inward Dialing (DID) Support
The DID line board allows incoming CO calls to reach internal DXP Ph intercom extensions by direct dialing.
No attendant assistance is necessary. Since DID lines are incoming only, their direct appearance is limited to
attendant stations where status indication may be useful. DID operation requires a group of published directory
numbers (400 maximum) provided by the telephone company central office (CO). These directory...