Comdial Dxp Plus Digital Communications System Instructions Manual

Digital Communications System
Programming Instructions
This publication reflects software
releases through 
2.A.
Printed in U.S.A.
COMDWm
IMI66-123.01
8195 

CERTIFBEC
IS0 sooa
Corndial’s Quality Management System 1s
Certified To The IS0 9001 Standard.
AtoZ KELLATRONICS, INC,
ii 

Table Of Contents
1Understanding General Programming Information
1.0Determining Your Equipment Needs
1.1Connecting The PC To The DXP PZus
1.2Installing The VMMI Software Program
1.3Performing The Login Procedure
1.4Loading The System Software
1.5Using VMMI Software To Translate A DXP Database
1.6Using VMMI Software To Archive And Restore The Database
1.7Using VMMI Software To Perform The Board Configuration
1.8Configuring The Windows Terminal Emulation
2Reviewing General Programming Considerations...

/M/66-123DXP Plus Programming Instructions
6Programming Sysfem Features
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
6.10
6.11
6.12
6.13
Default Functional Programming
VDT Display Configurations (Terminal Setup)
Messaging
Serial Port (Serial Data Port Parameters)
Subdued Off-Hook Voice Announce (SOHVA) Programming
Speed Dial Programming
System Clock (Time and Date)
System Timing
System Parameters
Paging Zones (Paging Programming)
Password Programming (Change Password)
Feature Renumbering
Programming The Tl...

DXP Plus Programming Instructions/M/66-12310Programming Call Costing and Station 
Message-Retail Accounting and Reports 
(SMDABMDR Programmingj10.1 
SMDAKMDR Parameters
10.2 SMDA Reports
10.3Account Codes (Forced, With Positive Verification)10.4 Emergency Numbers
10.5 Authorization Code
11Programming Toll Restriction
11.1TollRestriction
Example1
11.2TollRestriction
Example2
11.3
Toll Restriction Flow Diagram
11.4Restriction Level Programming
11.5Toll Groups Programming
11.6Restricted Numbers Programming...

/M/66-123DXP Plus Programming Instructions
14Programming For Peripheral Devices
14.1Caller ID Programming
14.2Tracker Paging System Programming
14.3Digital Voice Announce Programming
14.4PC Attendant Position Programming
14.5Voice Mail Programming14.6 Modem Setup
15Configuring The System’s Board Layout
15.1Understanding The Board Configuration Feature
15.2Examining The Board Status
15.3Adding Boards To The System
15.4Deleting Boards From The System
15.5Moving Boards Within The Systemvi Table Of Contents 

Understanding General
Programming Information
I.0Determining Your Equipment Needs
Program the DXP  Plus digital communications system from a personal computer (PC) that meets\
 the
following requirements:
lIntel* 80386SX-33 processor (minimum requirement),
lfour megabytes of random access memory (minimum requirement),
l3.5-inch floppy disk drive,
lhard drive with at least 80 megabytes of storage capacity,
lavailable g-pin or 25-pin serial data port (required for communications with DXP  Plus),
lmouse...

IM166-123DXP Plus Programming Instructions
1.1Connecting The PC To The DXP Plus
Connect the serial data port of the PC to the maintenance port of the DXP Plus central processor (CPU)board. The maintenance port is a dedicated serial data port reserved exclusively for system
programming.
You can connect the PC remotely to the DXP Plus using a modem and a telephone line. The DXP Phs
includes its own modem that someone on site can connect between the CPU board’s modem port and an
outside telephone line....

DXP Plus Programming InstructionsIlW66-123
1.2Installing The VMMI Software ProgramThe VMMI software is your entry to the DXP Plus system. Before you can 
login to the system, you
must first load the VMMI software into your PC’s memory. When installing the VMMI software, your
PC need not be connected to the DXP Plus.
1.
2.
3.
4
5.
6.
7.
8.
9.Turn on your PC and load your Windows software.
Insert the VMMI software disk in your computer’s floppy disk drive.
From the Windows Program Manager screen, select...

/M/66-123DXP Plus Programming Instructions
1.3Performing The Login Procedure
Once you have loaded the VMMI software using the Section 1.2 discussion, you can login to the systemby performing the following procedure.
1.Turn on your PC and load the Windows software.
2.Select the VMMI program from the Windows Program Manager screen
3.From the VMMI window, select the DXP pull-down menu.
4.From the DXP pull-down menu, select Login.
5.From the Login window, select the login mode:
6.From the login menu, select...