Cisco D9854i Manual

 
 
 Diagnostics Menu 
 
78-4021470-01 Rev J 127 
 
EMC PID of the channels Entitlement Control Message stream. It is displayed as ---- 
if unavailable or not scrambled. 
Program Name Name of the channel. 
  
PSI - Tables 
This is the Tables received sub-menu. You cannot make any changes here, but you 
can view the PSI tables received and their settings. Press the UP and DOWN arrow 
keys to scroll through the list of tables. 
Menu Item Description Parameters 
Type  The MPEG table acronym. PAT, CAT, PMT,...

 
Chapter 4    Front Panel Operation  
 
 
128 78-4021470-01 Rev J 
Menu Item Description 
Tot Rst #,  Displays the total numbers of times the current unit has been reset since it was 
manufactured. 
Clrbl Rst # Displays the number of times the unit has been reset since the clearable reset 
counter was last cleared. 
Clr Rst # Select this option to clear/reset the Clrbl Rst # counter to 0. 
Reason For Last 
Reset 
Displays the reason for the last reset. 
  
Health Monitor 
Menu Item Description...

 
 
78-4021470-01 Rev J 129 
 
Introduction 
This chapter describes how to set up the D9854 Advanced Program 
Receiver using the web GUI.  
 
 
5 Chapter 5 
Web GUI Setup and Monitoring 
In This Chapter 
 Logging On to the Web Interface...................................................... 130 
 D9854 Summary Overview ............................................................... 131 
 D9854 Menus ....................................................................................... 133 
 D9854 Web...

 
Chapter 5    Web GUI Setup and Monitoring  
 
 
130 78-4021470-01 Rev J 
Logging On to the Web Interface 
1 Open a web browser. 
Note: The supported web browsers are: Internet Explorer 7.0, Internet Explorer 
8.0, Firefox 3.5, and Firefox 3.6. 
2 Type the IP address of the D9854 Advanced Program Receiver in the Address 
bar and press Enter. 
 
3 Type the Username and Password. 
Note: The username and password are case-sensitive. The default username is 
admin and the default password is localadmin. If...

 
 
 D9854 Summary Overview 
 
78-4021470-01 Rev J 131 
 
D9854 Summary Overview 
From the user interface of the D9854, click Summary > Summary Dashboard. The 
Summary Dashboard page is displayed. 
 
The Summary Dashboard page displays the main settings of the D9854 Advanced 
Program Receiver. 
The shortcuts above the modules in the Summary Dashboard page are shortcuts to 
the various setup pages. For example, click Video Setup to open the Video Setup 
page. 
You can customize the Summary Dashboard by...

 
Chapter 5    Web GUI Setup and Monitoring  
 
 
132 78-4021470-01 Rev J 
You can also customize the Dashboard by clicking on Add/Remove Module. The 
Dashboard Configuration window is displayed. 
 
The following table describes the all the available modules: 
Module Description 
Decoded Program Status Displays channel and service information. 
Audio Status Displays the current audio status information, such as 
the audio format and sampling frequency. 
Current Input Status Displays the current RF Tuning...

 
 
 D9854 Menus 
 
78-4021470-01 Rev J 133 
 
D9854 Menus 
The D9854 web GUI has menus at the top of the page. 
 
The functions for the menus are as follows: 
 Summary 
From this menu, you can obtain an overview of the D9854 operation. 
 Input 
From this menu, you can: 
- set up RF and ASI inputs, 
- configure muting thresholds, 
- view input status, 
- configure channels, 
- configure CI (Common Interface) settings, 
- view PSI, Frequency, and Channel tables. 
 Audio & Video 
From this menu, you...

 
Chapter 5    Web GUI Setup and Monitoring  
 
 
134 78-4021470-01 Rev J 
- view alarm and warning status information 
- configure ethernet ports, 
- set date and time formats, 
- configure lock levels. 
 Support 
From this menu, you can: 
- view logs, 
- view contact information, 
- view and upgrade software version. 
  

 
 
 D9854 Web GUI Environment 
 
78-4021470-01 Rev J 135 
 
D9854 Web GUI Environment 
The following is an example of a D9854 Web GUI page: 
  
Window Buttons 
The GUI of the D9854 has the following general buttons: 
Button Description 
Apply Saves and applies the settings to the receiver. 
Refresh Reads existing data from the D9854. If edits were made in a setup page, 
then unsaved changes are discarded. 
Reset Defaults Discards any changes made and sets data to default values. 
Clear Counters Resets...

 
Chapter 5    Web GUI Setup and Monitoring  
 
 
136 78-4021470-01 Rev J 
Setting up Input Information 
Setting up the RF Input 
1 From the user interface of the D9854, click Input > Input Setup. The Input Setup 
page is displayed. 
 
2 In the RF Input Selection section, select Use RF Input to activate an RF input. 
You can select RF 1 to RF 4 below. 
3 Select UserCfg in the Input Selection to lock to the RF input set by the user. 
Select SW Map to use the orbital position settings to select the RF...