Cisco D9854i Manual
Here you can view all the pages of manual Cisco D9854i Manual. The Cisco manuals for TV Receiver are available online for free. You can easily download all the documents as PDF.
Page 101
Setup Menu 78-4021470-01 Rev J 77 Setup Menu: Services To view the Services menu from the Main menu, press the RIGHT arrow key once and then the SELECT key to reach the Setup menu. Then press the RIGHT arrow key three times and the SELECT key to view the Services menu. The Services menu allows you to set up all the operating parameters associated with audio, video and captions services. Each parameter is described below. The menu has the following structure: Video Menu Item...
Page 102
Chapter 4 Front Panel Operation 78 78-4021470-01 Rev J Menu Item Description Parameters PV Output Indicates the actual output video format. This value is read-only. SD, HD 720p, or HD 1080i Stream Indicates the video format of the input video stream. This value is read-only. SD Format Selects the standard definition output format to use on the primary video if the PV Output is set to SD. Auto, NTSC, PAL-N (AR), PAL-M or PAL-B/G/I/D. Use NTSC for 525-line systems and PAL-B/G/I/D...
Page 103
Setup Menu 78-4021470-01 Rev J 79 Menu Item Description Parameters Act Conv The actual aspect ratio conversion the receiver will perform based on what you have selected. This is read-only. Refer to Aspect Ratio Conversions (on page 80) for the conversions performed by the receiver based on your selection, and the effect on the picture displayed by the receiver in each case (without Auto AFD) None, 16:9 L/B, 4:3 P/B, 14:9, 4:3 CCO, 16:9 SCALE WSS Mode Select the Wide Screen...
Page 104
Chapter 4 Front Panel Operation 80 78-4021470-01 Rev J Aspect Ratio Conversions The following table displays the conversions performed by the receiver based on the Act Conv selection: Stream TV A/R Conversion Act Conv Description Image 4:3 4:3 None None Normal Picture 4:3 4:3 Auto None No conversion 4:3 4:3 16:9 L/B None Conversion is not possible. Normal picture. 4:3 4:3 4:3 CCO None Conversion is not possible. Normal picture. 4:3 4:3 4:3 P/B None Conversion is not...
Page 105
Setup Menu 78-4021470-01 Rev J 81 Stream TV A/R Conversion Act Conv Description Image 4:3 16:9 4:3 P/B 4:3 P/B 4:3 picture is centered in a pillar-style box. 4:3 16:9 14:9 14:9 Compromises some up- sampling. Some black bars and cropping are visible. 4:3 16:9 16:9 SCALE 16:9 SCALE Vertically up-samples the center of the 4:3 picture and crops the top and bottom of the screen. 16:9 16:9 None None Normal 16:9 16:9 Auto None No conversion. Normal picture. 16:9 16:9 16:9...
Page 106
Chapter 4 Front Panel Operation 82 78-4021470-01 Rev J Stream TV A/R Conversion Act Conv Description Image 16:9 4:3 16:9 L/B 16:9 L/B Vertically down-samples the picture and applies black bars at the top and bottom of the screen. 16:9 4:3 4:3 CCO 4:3 CCO Horizontally up-samples the center portion of the picture to fill the 720. 16:9 4:3 4:3 P/B None Conversion is not possible. Picture appears tall and thin. 16:9 4:3 14:9 14:9 Compromises some up- sampling. Some black bars and...
Page 107
Setup Menu 78-4021470-01 Rev J 83 Audio Menu Item Description Parameters Aud# Sets which balanced audio output on the rear panel to configure. 1 or 2 Stereo/Mono Sets the output mixing. Stereo - Left and Right are passed directly through to Left and Right R-MONO - Right is passed to both the Left and Right L-MONO - Left is passed to both the Left and Right Mixed - Left is passed to both the Left and Right, and Right is passed to both the Left and Right. AC3 Compression Sets...
Page 108
Chapter 4 Front Panel Operation 84 78-4021470-01 Rev J Menu Item Description Parameters DDP Sets the Dolby Digital Plus output mode. If Trans is selected, it will transcode to Dolby Digital (AC-3) audio output. If Passthrough is selected and the bitrate is less than 1536 kbps (48 Khz), passthrough is performed and Dolby Digital Plus compressed out is received. If Passthrough is selected and the bitrate is more than 1536 Kbps, transcoding will be performed. This setting affects...
Page 109
Setup Menu 78-4021470-01 Rev J 85 Digital Out Preference When Dig Out Pref is set to PCM Samples, the output is PCM regardless of whether its MPEG, Dolby Digital (AC-3) or AAC audio. Additionally, when the output is Compressed, MPEG-1 L1 and L2 will be output PCM, even though Dolby Digital (AC-3) and AAC is compressed (and transcoded). Digital Output Preference Output Input PCM Samples Compressed DDP Mode Transcode (Converter) Passthrough MPEG LA (MPEG-1 and MPEG-2) PCM PCM...
Page 110
Chapter 4 Front Panel Operation 86 78-4021470-01 Rev J VBI Menu Item Description Parameters WSS Mode Selects the Wide Screen Signaling output mode. It is used to select how the receiver affects PAL WSS when it is present in the VBI line 23. Auto:Create - Creates WSS to output the correct aspect ratio, when performing aspect ratio conversion. Auto:Modify - If WSS is present in the input stream, it is modified to output the correct aspect ratio when performing aspect ratio...
All Cisco manuals