Cisco D9854i Manual

 
 
 Setup Menu 
 
78-4021470-01 Rev J 57 
 
Setup Menu 
Structure 
To view the Setup menu from the Main menu, press the RIGHT arrow key once and 
the SELECT key. The Setup menu is split into nine parts; Administration, TS Input, 
IP, Services, CI, Outputs, CA, Alarms/Warnings, and Noise Cutoff. For instructions 
on how to select and store settings, see About the Front Panel (on page 38). 
The Setup menu allows you to set all the parameters associated with the following: 
 Administration - lock level,...

 
Chapter 4    Front Panel Operation  
 
 
58 78-4021470-01 Rev J 
Setup Menu: Admin 
To view the Admin menu from the Main menu, press the SELECT key. 
For instructions on how to select and store settings, see About the Front Panel (on 
page 38). 
The Admin menu has the following structure: 
 
Menu Item Description Parameters 
Lock Level Sets the front panel interface lock 
level. 
For information on each of the lock 
levels, see D9854 Receiver Lock 
Levels (on page 304). 
0, 1, 2, 3, or 4  

 
 
 Setup Menu 
 
78-4021470-01 Rev J 59 
 
Menu Item Description Parameters 
Password Enter the password to successfully 
set the current lock level. 
Depending on the unit, the default 
password for all lock levels is 1234. 
For more information on the 
default password, contact Cisco 
customer support. 
 
Old Pwd, New Pwd, 
Confirm Pwd 
To change the password, enter the 
old password (Old Pwd). Next, 
enter the new password (New 
Pwd, four digits in the range from 
0000 to 9999) and re-enter the new...

 
Chapter 4    Front Panel Operation  
 
 
60 78-4021470-01 Rev J 
Menu Item Description Parameters 
LCD Contrast Adjusts the contrast of the LCD 
menu panel. 
1 (lowest contrast) to 30 (highest 
contrast) 
DL Mode Set the unforced over-the-air 
download mode. 
Always - Unforced download 
will be accepted and saved in 
memory. 
Once - An unforced download 
will be accepted, followed by a 
reboot of the receiver, and the 
DL Mode will change to Never. 
Never - Unforced downloads 
will not be accepted....

 
 
 Setup Menu 
 
78-4021470-01 Rev J 61 
 
Menu Item Description Parameters 
Type The type of download being 
performed. 
None - No download is being 
performed. 
Rear Panel - The rear panel 
download is being performed. 
HTTP - An HTTP download 
from the web GUI is being 
performed. 
Over Air - An over-the-air 
download is being performed. 
Bank The type of code being 
downloaded. 
App 5514 - Currently 
downloading code for app5514 
on the HDR/HDR2 board. 
App 7109 - Currently 
downloading code for...

 
Chapter 4    Front Panel Operation  
 
 
62 78-4021470-01 Rev J 
Menu Item Description Parameters 
Date Format Select the date format. YYYY_MM_DD, 
DD_MM_YYYY, or 
MM_DD_YYYY 
Time Format Select the time format. 24Hr, 24Hr SuspendZero, 12Hr, 
12Hr SuspendZero. The 
SuspendZero options omit the 
leading zero. 
GMT Off Select the local time zone offset 
relative to the GMT time. The time 
information in the transmitted 
stream is broadcast as GMT time 
and changing this setting will 
allow the unit to...

 
 
 Setup Menu 
 
78-4021470-01 Rev J 63 
 
 
Setup Menu: TS Input 
To view the TS (Transport Stream) Input menu from the Main menu, press the 
RIGHT arrow key once and then the SELECT key to reach the Setup menu. Then 
press the RIGHT arrow key once and the SELECT key to view the TS Input menu. 
For instructions on how to select and store settings, see About the Front Panel (on 
page 38). 
The TS Input menu has the following structure: 
  
ASI Input 
Menu Item Description Parameters 
ASI Active Select...

 
Chapter 4    Front Panel Operation  
 
 
64 78-4021470-01 Rev J 
Menu Item Description Parameters 
CA Ctl Sets how the conditional access will 
attempt to descramble the scrambled 
programs. The behavior of this setting 
is different between PowerVu streams 
and those that require a CAM. 
For PowerVu streams: 
Std - In standard mode, if a 
program is not authorized, even if 
some services are not scrambled, 
the whole program will not be 
authorized. 
Open - In open mode, if a program 
is not...

 
 
 Setup Menu 
 
78-4021470-01 Rev J 65 
 
Menu Item Description Parameters 
CA Ctl Sets how the conditional access will attempt to 
descramble the scrambled programs. The 
behavior of this setting is different between 
PowerVu streams and those that require a 
CAM. 
For PowerVu streams: 
Std - In standard mode, if 
a program is not 
authorized, even if some 
services are not scrambled, 
the whole program will 
not be authorized. 
Open - In open mode, if a 
program is not authorized, 
any services in...

 
Chapter 4    Front Panel Operation  
 
 
66 78-4021470-01 Rev J 
Menu Item Description Parameters 
Crossover (GHz) This is the crossover frequency, which is an 
internal threshold frequency used for selecting 
the LO1 or LO2 frequency, depending on the 
current Downlink frequency settings. This 
option is only used in dual-band LNB 
applications.  
0.0 to 15.0 GHz. In single-
band LNB applications, set 
this value to 0.0. 
Satellite This is the name of the satellite currently 
selected. Choose the...