Cisco D9854i Manual

 
 
 Setting up Input Information 
 
78-4021470-01 Rev J 157 
 
Viewing PSI Frequency Table Information 
From the user interface of the D9854, click Input > Stream Details > PSI Frequency. 
The PSI Frequency page is displayed. 
 
You cannot make any changes in the PSI Frequency table and can only view the 
available frequency plans stored in the receiver. The following is a list of the various 
columns: 
Abbreviation  Description 
Transport Stream ID Displays the transport ID. 
Frequency (GHz) Displays...

 
Chapter 5    Web GUI Setup and Monitoring  
 
 
158 78-4021470-01 Rev J 
Viewing the PSI Channels 
From the user interface of the D9854, click Input > Stream Details > PSI Channel. 
The PSI Channel page is displayed. 
 
You cannot make any changes in the PSI Channel table and can only view the 
available channels and their settings. The following is a list of the various columns: 
Abbreviation  Description 
Service ID Indicates the virtual channel number. 
TS ID Displays the identification number of...

 
 
 Setting up Input Information 
 
78-4021470-01 Rev J 159 
 
Viewing the PID Input Status 
From the user interface of the D9854, click Input > Stream Details > PID Input 
Status. The PID Input Status page is displayed. 
 
You cannot make any changes in the PID Input Status table and can only view the 
available channels and their settings. The following is a list of the various columns: 
Abbreviation Description 
PE Index Indicates the Program Entry number (PE1 or PE16). 
Type  Name assigned to the...

 
Chapter 5    Web GUI Setup and Monitoring  
 
 
160 78-4021470-01 Rev J 
Setting up Audio and Video Information 
Setting up the Video Parameters 
1 From the user interface of the D9854, click Audio & Video > Audio & Video > 
Video Decoding. The Video Setup page is displayed. 
 
2 Select the Primary Video Output format for local decoding. The options are 
Auto, HD 720p, HD 1080i, or SD. 
3 Select whether to enable or disable the Component Tri-Synch. 
4 In the Standard Definition Output drop-down, select...

 
 
 Setting up Audio and Video Information 
 
78-4021470-01 Rev J 161 
 
WSS Mode  Description 
Passthrough  Passes WSS unmodified as received by the receiver. 
Auto:Create Creates WSS to output the correct aspect ratio when performing 
aspect ratio conversion. 
Auto:Modify If WSS is present in the input stream, it is modified to output the 
correct aspect ratio when performing aspect ratio conversion. If 
WSS is not present in the input, no WSS will be present in the 
output. 
Suppress Removes WSS...

 
Chapter 5    Web GUI Setup and Monitoring  
 
 
162 78-4021470-01 Rev J 
Setting up Captions 
1 From the user interface of the D9854, click Audio & Video > Audio & Video, 
expand Video Decoding and then click Captions. The Captions page is 
displayed. 
 
2 In the Preferred Closed Caption Mode, select the type of closed captioning to 
use if there are multiple available in the stream. The default is Auto. 
Note: SA Custom is not supported when telecine video coding is enabled. 
3 The Closed Caption Mode...

 
 
 Setting up Audio and Video Information 
 
78-4021470-01 Rev J 163 
 
Setting up Subtitles 
1 From the user interface of the D9854, click Audio & Video > Audio & Video, 
expand Video Decoding and then click Subtitles. The Subtitles page is 
displayed. 
 
2 Select the Subtitle Control to use to display the program subtitles. The following 
table describes each of the available options: 
Op Mode Selection Description 
Off No subtitles are displayed. 
On Displays DVB or Imitext subtitles, if available....

 
Chapter 5    Web GUI Setup and Monitoring  
 
 
164 78-4021470-01 Rev J 
BackGnd Option Description 
Shadow Applies an outline to the right side of each text character. No 
background box is applied to subtitles, i.e., text is visible directly on 
top of video. 
Opaque Applies a black box to each text character. 
Semi Applies a semi-transparent box to subtitle text. 
None No shadow or outline is applied to subtitle text. 
6 In the Subtitle Language Settings section, select the input source for the...

 
 
 Setting up Audio and Video Information 
 
78-4021470-01 Rev J 165 
 
Setting up the VBI 
1 From the user interface of the D9854, click Audio & Video > Audio & Video, 
expand Video Decoding and then click VBI. The VBI page is displayed. 
 
2 Select to enable Vertical Interval Test Signal (VITS) on PAL Lines 17, 18, 330, or 
331. 
3 Click Apply.   

 
Chapter 5    Web GUI Setup and Monitoring  
 
 
166 78-4021470-01 Rev J 
Setting up Audio Parameters 
1 From the user interface of the D9854, click Audio & Video > Audio & Video > 
Audio Decoding. The Audio Decoding page is displayed. 
 
2 There are two audio settings. It allows you to configure the two balanced audio 
outputs on the rear panel (Audio 1 and Audio 2), known in the Web GUI as 1 
and 2, respectively. 
3 Select the PMT Source for the audio channel (None, AUD1 to AUD64). 
4 Set the Audio...