Canon scanner imageFORMULA DRX10C User Manual

							7-4
Chapter 7   Appendix
Options
Pre-Imprinter Unit (Product Code: 2418B003)
This imprinter unit prints a text string on document pages 
before scanning them. (See “Imprinter (Optional)” on p. 4-8.)
Post-Imprinter Unit (Product Code: 2418B004)
This imprinter unit prints a text string on document pages 
after scanning them. (See “Imprinter (Optional)” on p. 4-8.)
Barcode Module (Product Code: 8927A003)
Add-on software that enables barcode recognition by the 
ISIS/TWAIN driver. (See “[Barcode] Dialog Box Settings” 
on p. 8-21.)
Patchcode Decoder (Product Code: 2418B005)
This unit detects patchcode sheets within documents. (See 
“Using Patchcode Sheets (Option)” on p. 3-19.)
Consumables
Roller Replacement Kit (Product Code: 2418B001)
Replacement kit for transport rollers (pick-up roller, feed 
rollers, and retard roller). (See “Replacing the Transport 
Rollers” on p. 5-12.)
IMPORTANT
 Rollers are consumable parts. When the rollers start to wear out, 
problems, such as paper jams and misfeeds, are more likely to 
occur. If this happens, replace the rollers, regardless of the page 
count.
 For information about the roller replacement kit, contact your local 
authorized Canon dealer or service representative.
Cleaning Sheets (Product Code: 2418B002)
This is a package of cleaning sheets for cleaning the transport 
rollers. (See “Cleaning Rollers with a Cleaning Sheet” on 
p. 5-4.)Ink Cartridge: Blue (Product Code: 3693A002) 
(C6602B)
This blue ink cartridge is used by the pre- and post-imprinters. 
(See “Replacing Ink Cartridges” on p. 5-15.)
Ink Cartridge: Red (Product Code: 3693A003) 
(C6602R)
This red ink cartridge is used by the pre- and post-imprinters.
Ink Cartridge: Green (Product Code: 3693A004) 
(C6602G)
This green ink cartridge is used by the pre- and post-
imprinters.
IMPORTANT
 Reorder HP’s ink cartridges by specifying their product codes 
(indicated in parentheses). 
						

							7-5
Chapter 7   Appendix
External Dimensions
33.90 (861 mm)21.10 (536 mm) 22.17 (563 mm)
14.77 (375 mm)17.01 (432 mm)
20.79 (528 mm) 5.51 
(140 mm) 
						

							7-6
Chapter 7   Appendix
2.Option Specifications
This section contains the specifications for the separately sold Barcode Module (p. 7-4) and imprinters. Refer to “Using Patchcode 
Sheets (Option)” (p. 3-19) for the specifications of the patchcodes that can be detected by the patchcode decoder.
Barcode Specifications
The following barcodes can be read by installing the optional 
barcode module.
■Barcode Types
Note: EAN, UPC-A and UPC-E add-ons supported
■Detection Conditions
Code No. of Digits Checksum
EAN 8 or 13 Modulus 10, Weight 3
Codabar 3 to 32 (including 
Start/Stop characters)Modulus 16, 7 DR
Code 39 3 to 32 (including 
Start/Stop characters)
(Standard ASCII or 
Full ASCII)Modulus 43
ITF 2 to 32 (Even 
number. of digits 
only)Modulus 10, Weight 3
Code 128 1 to 32 (Valid data 
only)Modulus 103
UPC-A 13 Modulus 10, Weight 3
UPC-E 8 Modulus 10, Weight 3
Item Condition
Printed 
SideFront or back (or both, but at reduced speed)
Orientation Perpendicular (0 degrees) or parallel (90 
degrees) to the feeding direction
Reading direction should be specified 
beforehand
Note: Speed is slow when both directions are 
specified.
Size Line Width 0.012 to 0.039 (0.3 to 1 
mm)
When module width exceeds 
0.021 (0.508 mm), Code 
128, UPC-A, UPC-E and 
EAN detect incorrectly
Code Width 4.134 (105 mm) or less 
(including quiet zone)
Bar Height At least 0.393 (10 mm)
Margins At least one character at each 
end
Slew Within ±3º
Element 
Ratio2.2 to 3.0
PCS Value At least 0.60 (with a white point of at least 
75% reflectance)
Feeding 
Direction0 degrees 90 degrees 
						

							7-7
Chapter 7   Appendix
Imprinter Specifications
Printing Timing
Pre-Imprinter: Before scanning
Post-Imprinter: After scanning
 
Printing Side
Front
Position
Set in the ISIS/TWAIN driver (See p. 8-26)
Pre-Imprinter: One of 6 positions
Post-Imprinter: One of 17 positions
Printing Content
Set in the ISIS/TWAIN driverImprinter Font Sizes (Dots)
12 × 12 (with no added space between characters)
12 × 8 (with no added space between characters)
12 × 12 (with added space between characters)
12 × 8 (with added space between characters)
Number of Printable Characters
Up to 32 characters
Printable Paper
Plain paper without water-resist coating
Compatible Ink Cartridges
HP Ink Cartridges
Color: Blue, Red, Green (see p. 5-14)
Image Density
12 nozzles/oblique line (96 dpi)
Ink Type
Water-based
Operating Environment
As specified for the ink cartridge
Position Feeding 
DirectionAt least 0.079 (2 mm) from 
the edge of the page
Perpendicular 
to Feeding 
DirectionAt least 0.197 (5 mm) from 
the edge of the page
Quantity Up to four per page
Spacing At least 0.197 (5 mm)
Conditions No background or overlapping barcodes Item Condition
Pre-Imprinter Post-Imprinter
Scanning Unit 
						

							7-8
Chapter 7   Appendix
3.Index
B
Background Selection  ................................................... 4-7
C
CapturePerfect 3.0  ...................................................... 3-15
Cleaning
feed roller  ............................................................... 5-7
glass ................................................................. 5-3, 5-5
pickup roller  ........................................................... 5-7
platen rollers  ........................................................... 5-6
print heads  ............................................................ 5-19
retard roller  ............................................................. 5-9
rollers ...................................................................... 5-3
scanner .................................................................... 5-2
Cleaning Cloth  .............................................................. 5-2
Cleaning Mode .............................................................. 5-4
Cleaning Sheet  .............................................................. 5-4
Connecting to a Computer ............................................ 2-6
Control Panel  .............................................................. 1-11
Counter ....................................................................... 5-13
Count-Only Mode  ......................................................... 4-4
D
Daisy-Chain Configuration ........................................... 2-8
Device Manager  .......................................................... 2-10
Disposal ........................................................................ 1-5
Document Eject Tray  .................................................. 3-11
extension ............................................................... 3-11
Document Feed Tray  .................................................... 3-7
extension ................................................................. 3-9
home position  ......................................................... 3-7
Document Feeding Methods ....................................... 3-12
continuous feeding  ............................................... 3-12
continuous manual feeding ................................... 3-13
manual feeding  ..................................................... 3-12
Document Guides  ................................................ 3-8, 3-11
adjusting ............................................................... 3-11
Documents .................................................................... 3-4Double-Feed Detection Function  .................................. 4-5
Double-Feed Errors  ..................................................... 3-22
Double-Feed Retry  ........................................................ 4-6
E
Eject Paper Stoppers .................................................... 3-11
Error Messages  .............................................................. 6-3
F
Folio Scanning ............................................................... 4-7
H
Handling ........................................................................ 1-3
I
Imprinter .............................................................. 4-8, 5-14
Imprinter Cover  ........................................................... 5-17
Imprinter Testing  ......................................................... 5-20
Ink Cartridges  .............................................................. 5-14
Installation Location  ...................................................... 1-2
Introduction ................................................................. 1-iii
J
Job Function  ................................................................ 3-14
L
Lock Lever  .................................................................. 5-16
Locking the Keys  .......................................................... 4-8
Long Document Mode  .................................................. 3-5
M
Maintenance .................................................................. 5-2
Manuals ....................................................................... 1-iii
Messages ....................................................................... 6-2
Moving the Scanner  ...................................................... 1-3
O
Opening/Closing the Upper Unit ................................... 5-3
Other Functions  ............................................................. 4-2
P
Paper Jams  ................................................................... 3-21
Part Names and Functions  ........................................... 1-10
Patchcode Patterns ....................................................... 3-19
Patchcode Sheets  ......................................................... 3-19 
						

							7-9
Chapter 7   Appendix
Post-Imprinter ............................................................... 4-8
Power ............................................................................ 1-2
turning ON/OFF  ..................................................... 3-2
Power Switch  ......................................................... 2-9, 3-2
Pre-Imprinter ................................................................. 4-8
Problems and Solutions  ................................................ 6-5
R
Rapid Recovery System .............................................. 3-23
Replacing the Ink Cartridge
post-imprinter ....................................................... 5-17
pre-imprinter ......................................................... 5-15
Replacing the Transport Rollers  ................................. 5-12
replacement cycle  ................................................. 5-12
Roller Replacement Kit  .............................................. 5-12
S
Safety Instructions  ........................................................ 1-2
Scanner Recognition  ..................................................... 2-9
Scanning ..................................................................... 3-14
SCSI Connection  .......................................................... 2-7
SCSI Connector  ............................................................ 2-6
Setup ............................................................................. 2-2
Setup Menu  ................................................................... 2-4
custom installation .................................................. 2-5
read manuals  ........................................................... 2-5
typical installation  .................................................. 2-4
Skew Detection Function .............................................. 4-6
Software
installing ................................................................. 2-4
uninstalling ............................................................. 6-9
Staple Detection Function ............................................. 4-6
Status Display  ............................................................... 6-2
System Requirements  ................................................... 2-3
T
Terminator .................................................................... 2-8
Troubleshooting ............................................................ 6-5
trouble categories  ................................................... 6-5
U
Ultrasonic Double-Feed Detection ............................... 4-5USB Connection  ............................................................ 2-6
USB Connector  ............................................................. 2-6
USB-Linked Switch  ...................................................... 3-2
User Mode  ..................................................................... 4-9
functions ................................................................ 4-11
operating procedure ................................................. 4-9
V
Verify Count  .................................................................. 4-4
Verify Scan  .................................................................... 4-4 
						

							User Manual
Software
Please read this manual before using the scanner.
After you finish reading this manual, keep it in a safe place 
for future reference. 
						

							ii
Software
Table of Contents
Chapter 8   ISIS/TWAIN Driver Settings
1. Before You Start Using the Scanner ................ 8-2
2. ISIS/TWAIN Driver Settings Dialog Box ........... 8-4
Basic Tab Sheet ................................................... 8-5
[Brightness] Tab Sheet ....................................... 8-12
[Image processing] Tab Sheet............................ 8-15
[Others] Tab Sheet ............................................. 8-17
[Pre Imprinter] and [Post Imprinter] 
Tab Sheets ......................................................... 8-24
Chapter 9   Job Registration Tool Settings
1. Before Use ....................................................... 9-2
Job Function ......................................................... 9-2
Starting the Job Registration Tool ........................ 9-2
2. Job Registration Tool ....................................... 9-3
3. Settings Dialog Boxes ...................................... 9-5
[New/Editing] Dialog Box ...................................... 9-5
[Admin] Dialog Box ............................................... 9-8
Chapter 10   Practical Examples
1. About Basic Condition Settings ...................... 10-2
Confirming the Basic Conditions for Scanning ... 10-2
2. Practical Examples ......................................... 10-4
Scanning Documents of Unregistered 
Page Sizes ......................................................... 10-4
Specifying the Scanning Area ............................ 10-5
Configuring Scanner Settings According to 
the Purpose ........................................................ 10-6
Registering Your Settings ................................. 10-11 
						

							Chapter 8   ISIS/TWAIN Driver Settings
1. Before You Start Using the Scanner................ 8-2
2. ISIS/TWAIN Driver Settings Dialog Box .......... 8-4
Basic Tab Sheet ....................................................8-5
[Brightness] Tab Sheet........................................8-12
[Image processing] Tab Sheet ............................8-15
[Others] Tab Sheet ..............................................8-17
[Pre Imprinter] and [Post Imprinter] 
Tab Sheets ..........................................................8-24 
						

							8-2
Chapter 8   ISIS/TWAIN Driver Settings
1.Before You Start Using the Scanner
To use the DR-X10C with an ISIS/TWAIN-compliant application program, the DR-X10C must first be selected as the scanner to 
be used. This section describes how to select the scanner using CapturePerfect 3.0 (an ISIS-compatible application program). As 
the scanner selection procedure depends on the application program being used, refer to your application’s user’s manual if 
necessary for instructions on selecting the scanner.
1.Click the [Start] button, then select [Programs] - 
[CapturePerfect 3.0] - [CapturePerfect 3.0].
CapturePerfect 3.0 starts.2.Select [Select Scanner] from the [Scan] menu.
The [Select Scanner] dialog box appears. 
3.Select “CANON DR-X10C”, and click [Settings].
IMPORTANT
If [CANON DR-X10C] does not appear, try reinstalling the ISIS/
TWAIN driver.