Canon scanner imageFORMULA DR6030C User Manual

							Using the Scanner55
Chapter 2
2. This operation depends on your operating system.
„Windows XP
Switch the Control Panel to Classic View, or select [Printers and Other 
Hardware] in the working field.
„Windows Vista
Switch the Control Panel to Classic View, or select [Hardware and sound] in 
the working field.
„Windows 7
Click [View by] at the upper-right of the Control Panel, and then select 
[Large icons] or [Small icons] from the list, or select [Hardware and Sound] 
in the category view.
Printers and Other Hardware Control Panel (category view)
Control Panel (classic view) 
						

							56Using the Scanner
3. Click [View devices and printers]. (For Windows XP and Windows Vista, 
click [Scanners and Cameras].)
4. Select [CANON DR-6030C] (or [CANON DR-6030C SCSI]), and then 
click the right mouse button and select [Properties]. (For Windows XP and 
Windows Vista, select [CANON DR-6030C USB] (or [CANON DR-6030C 
SCSI]), and then click [Properties].) 
						

							Using the Scanner57
Chapter 2
[CANON DR-6030C USB Properties] (or [CANON DR-6030C SCSI 
Properties]) is displayed.
2.Click the [Maintenance] tab. 
						

							58Using the Scanner
3.Click the [Long Document mode (1,000 mm)] or [Long Document mode 
(3,000 mm)].
4.Click [OK] to change the scanner’s settings and close [Scanners and Cameras 
Properties].
5.Turn the scanner OFF and then ON again.
IMPORTANT
• If you are using a SCSI connection, turn off the computer and then turn the 
scanner off and then on again.
• Wait at least 10 seconds before tuming the scanner ON after it has been 
turned OFF. 
						

							Using the Scanner59
Chapter 2
Standby Mode Settings
The scanner is designed to save energy by going into Standby mode if it is not 
used for a certain period of time. This time period can be set to [After 10 secs] 
(factory set default), [After 10 mins], [After 1 hour] or [After 4 hours]. You can 
change the Standby mode settings on the maintenance screen of CANON 
DR-6030C USB properties, in the same way as the long document mode 
described previously. 
						

							60Using the Scanner
MultiStream Function
If the application that you are using supports the MultiStream function, then it 
is possible to scan a document one time and simultaneously output two types 
of images (Primary image and Secondary image). 
CapturePerfect 3.1, provided with the scanner, supports the MultiStream 
function so the following settings are possible. 
• You can set the Primary or Secondary image and Front or Back for the Image 
Type (mode), Resolution or Drop Out Color.
• You can change the File Type for the Primary image and the Secondary 
image. However, you cannot change Front or Back with File Type.
Note
When using the MultiStream function with CapturePerfect 3.1, “Skip blank 
page”, “Prescan”, “Text Orientation Recognition” and “Batch Separation” 
functions are disabled.
Auto Power OFF Function
This scanner includes an Auto Power OFF function. When this function is 
enabled, the scanner will turn OFF automatically if no operations are 
performed for 4 hours.
Depending on your country or region, the Auto Power OFF function may be 
enabled under factory default conditions. 
						

							
Using the Scanner61
Chapter 2
When changing the Auto Power OFF setting, make the changes from the 
[Maintenance] tab in the [CANON DR-6030C USB Properties] window used 
for selecting the Long Document mode described earlier.
If the [Turn off automatically after 4 ho urs] check box is selected, the Auto 
Power OFF function is enabled and the power turns off automatically after four 
hours pass without scanning or other operation.
If the [Turn off automatically after 4 hours] check box is deselected, the Auto 
Power OFF function is disabled.
Note
• Under the following circumstances, the Auto Power OFF function does not  operate even if the [Turn off automa tically after 4 hours] check box is 
selected.
- If any document remains in  the feeder after scanning
- If a scanner error occurs
• When the Auto Power OFF function is  enabled, the power cannot be turned 
back on again immediately after it has  been turned off automatically. Wait at 
least 10 minutes after operation of the Auto Power OFF function before 
turning the power back on again. 
						

							62Using the Scanner 
						

							Chapter 3
Software Setup
This chapter explains the elements of the ISIS/TWAIN driver 
setup dialog boxes and describes how to make settings, using 
various setting examples. 
For details on settings, refer to the online help.
1. ISIS/TWAIN Driver Properties Dialog 
Box ....................................................... 64
[Basic] Tab Sheet ...................................... 65
[Brightness] Tab Sheet .............................. 74
[Image processing] Tab Sheet .................. 78
[Others] Tab Sheet .................................... 81
[Addon] Dialog Box .................................... 85
2. Practical Examples ............................. 92
Scanning Both Sides of Pages .................. 92
Scanning Non-Standard-Size Documents . 93
Adjusting the Scan Area ............................ 93
Scanning Multiple Documents ................... 94
Image Adjustments for Scanning .............. 96
Prescan ..................................................... 99
Preserving Your Settings ........................... 99 
						

							64Software Setup
1. ISIS/TWAIN Driver Properties Dialog 
Box
The ISIS/TWAIN driver properties dialog box consists of four tabs: Basic, 
Brightness, Image processing and Others. See the description of each tab sheet for 
details.
[Basic] tab sheet (See p. 65.) [Brightness] tab sheet (See p. 74.)
[Image processing] tab sheet  [Others] tab sheet (See p. 81.)
(See p. 78.)
[OK] Button (ISIS driver)
Applies settings and closes the dialog box.
[Scan] Button (TWAIN driver)
To control scanning from the properties dialog box when using a TWAIN-
compatible application program, the [Scan] button is displayed instead of the [OK] 
button to scan with the current settings.
[Cancel] Button
Rejects changes to settings and closes the dialog box.
[Default] Button
Returns the settings to their default state.
[Help] Button
Displays help for the open tab sheet and dialog box.