Canon scanner imageFORMULA DR6030C User Manual

							Using the Scanner35
Chapter 2
CapturePerfect 3.1 starts up.
2.Follow the procedure below to select the Canon DR-6030C document scanner 
as the scanner to be used.
1. On the [Scan] menu, click [Select Scanner].
2. Select [CANON DR-6030C] Æ click the [OK] button. 
						

							36Using the Scanner
Note
If [CANON DR-6030C] is not displayed in the list of scanners, re-install the 
ISIS/TWAIN driver. (See “Step 3. Installing the Software” in the Easy Start 
Guide.)
3. Set the “Default Page Size” and click the [OK] button.
Note
This dialog box is displayed only when you select [CANON DR-6030C] for 
the first time and you click the [OK] button, or when you click [Settings] on 
the [Select Scanner].
3.On the [Scan] menu, click [Scanner Setting]. 
						

							Using the Scanner37
Chapter 2
ISIS Driver basic setup dialog box opens.
4.Set the scan settings.
For details setting the scanning settings, see “ISIS/TWAIN Driver Properties 
Dialog Box,” on p. 64, and ISIS/TWAIN Driver Help.
5.Place your document. (See “Placing Documents,” on p. 27.) 
						

							
38Using the Scanner
6.On the [Scan] menu, select [Scan Batch to File]. 
The [Scan Batch to File] dialog box opens.
For more details on how to scan documents, see the CapturePerfect 3.1 
operation guide and CapturePerfect Help.
7.Specify the file name and the file type for saving the image data, and click 
[Save] to start scanning.
For details on the available settings in the [Scan Batch to File] dialog box, see 
the CapturePerfect 3.1 operation guide and CapturePerfect Help. 
						

							Using the Scanner39
Chapter 2
8.When there are no more pages of the document to scan, scanning stops. 
Scanning resumes or ends according to the “Feeding Option” setting in the 
scanner setup. 
• When “Feeding Option” is set to [Standard Feeding]
The continue dialog box is displayed. Place the next document, and click 
[Continue scanning] to resume scanning. Or, click [Stop Scanning] to end 
scanning. 
• When “Feeding Option” is set to [Automatic Feeding]
Place the next document. Scanning resumes when the scanner detects the 
document. Or, press the stop button to end scanning.
• When “Feeding Option” is set to [Panel-Feeding] 
Place the next document and press the start button to resume scanning. Or, 
press the stop button to end scanning.
9.After scanning is complete, select [Exit] on the [File] menu to quit 
CapturePerfect 3.1.
Stop Button
Start Button 
						

							40Using the Scanner
Starting CapturePerfect 3.1 with the Start Button
DR-6030C and CapturePerfect 3.1 support Windows’ event functions. After 
installing the ISIS/TWAIN driver and CapturePerfect 3.1, you can have 
CapturePerfect 3.1 start automatically when you push the scanner start button 
by setting the Windows event function.
Note
All the applications that support event functions are enabled in the initial status 
immediately after setting up the DR-6030C. Because of this, the following 
dialog box appears if the event settings are not changed and the start button is 
pressed. 
When this dialog box appears, either select an application and start it or click 
the [Cancel] button and change the event settings.
Setting the Event Function
Follow the procedure below to set an event. 
1.Use the following procedure to open the [Event settings] dialog box.
1. Click the [Start] button, and then click [Control Panel].
2. This operation depends on your operating system. 
						

							Using the Scanner41
Chapter 2
„Windows XP
Switch the Control Panel to Classic View, or select [Printers and Other 
Hardware] in the working field.
„Windows Vista
Switch the Control Panel to Classic View, or select [Hardware and sound] in 
the working field.
„Windows 7
Click [View by] at the upper-right of the Control Panel, and then select 
[Large icons] or [Small icons] from the list, or select [Hardware and Sound] 
in the category view.
Printers and Other Hardware Control Panel (category view)
Control Panel (classic view) 
						

							42Using the Scanner
3. Click [View devices and printers]. (For Windows XP and Windows Vista, 
click [Scanners and Cameras].)
4. Select [CANON DR-6030C] (or [CANON DR-6030C SCSI]), and then 
click the right mouse button and select [Properties]. (For Windows XP and 
Windows Vista, select [CANON DR-6030C USB] (or [CANON DR-6030C 
SCSI]), and then click [Properties].) 
						

							Using the Scanner43
Chapter 2
[CANON DR-6030C USB Properties] (or [CANON DR-6030C SCSI 
Properties]) is displayed. 
5. Click the [Events] tab. 
						

							44Using the Scanner
2.In the initial status, all the applications displaying [Send to this application] are 
checked. Select one application to be started with the start button and uncheck 
the checkboxes for the other applications and then click [OK] (For Windows 
XP, [Apply]).
IMPORTANT
Check [Disable device events] to not start applications from the start button.
3.Click [OK] to close [CANON DR-6030C USB Properties].
4.Restart Windows to enable the new settings for the event function.