Canon scanner imageFORMULA DR6030C User Manual

							Software Setup85
Chapter 3
[Addon] Dialog Box
The [Addon] dialog box opens when you click the [Addon] button on the [Others] 
tab. This dialog box allows you to add text strings or bitmap images to scanned 
images.
Addon Dialog Box
Here you can make settings for adding text or bitmaps onto scanned images. 
						

							86Software Setup
[Addon] Check Boxes
Select the respective check box to enable adding text or images to the scanned 
image.
[Text] Settings
[Enable] Check Box
Select this check box to enable the text settings for addon.
Te x t
Enter the text string to be applied.
☞The following characters can be entered.
• Numerals 0 to 9
• Alphabetic characters A to Z and a to z
• Punctuation and symbols: ! # $ % &( ) * + - . , / : ; < > =?@[ ] { } ~ ` \
☞Enter special text such as counters, dates and arrows from the list that 
appears by clicking the [Special] button. The selected abbreviation is 
inserted into the text string.
[Single counter] abbreviation: 
Inserts one 9-digit counter.
[Double counter] abbreviation: 
Inserts two 9-digit counters.
[Single counter with number of characters] abbreviation: 
A dialog box appears in which to specify the number of characters of 
the single counter. The specified number of characters of the single 
counter will be inserted into scanned images.
[Double counter with number of characters] abbreviation: 
A dialog box appears in which to specify the number of characters of 
the double counter. The specified number of characters of the double 
counter will be inserted into scanned images.
[Current time] abbreviation: 
Inserts the time of scanning using 8 digits in 24-hour format. 
						

							Software Setup87
Chapter 3
[Date (Month/Day/Year)] abbreviation: 
Inserts the date of scanning using 10 characters in Month/Day/Year 
format.
[Date (Day/Month/Year)] abbreviation: 
Inserts the date of scanning using 10 characters in Day/Month/Year 
format.
[Date (Year/Month/Day)] abbreviation: 
Inserts the date of scanning using 10 characters in Year/Month/Day 
format.
[Up arrow] abbreviation: 
Inserts an up arrow (K) symbol.
[Down arrow] abbreviation: 
Inserts a down arrow (L) symbol.
[Left arrow] abbreviation: 
Inserts a left arrow () symbol.
[Right arrow] abbreviation: 
Inserts a right arrow (J) symbol.
☞Special text can only be entered for one type of counter. If entered for two 
counter types, the Preview panel displays an error message.
☞A maximum of 96 characters can be added, but this maximum decreases as 
the [Font size] setting is increased. When an entered text string exceeds the 
available maximum, the preview window displays an error. 
☞When inserting special text, the actual number of characters to apply can 
become quite large, even though little text is actually entered. 
						

							88Software Setup
[Orientation]
Specify the orientation for the text to be applied.
☞Text orientation relative to the feeding direction is as follows.
[Font size]
Select the font size of the text to be applied.
Font size (points):3, 4, 6, 8, 9, 10, 12, 16, 18 , 20, 24, 28, 30 or 38
☞When add-on text is applied to an image, the size of the characters depends 
on the scan resolution.
[More] Button (Text)
Click this button to display the [Character String Settings for the Imprinter/
Addon] dialog box. (See “Text/Bitmap Settings Dialog Boxes,” on p. 89.)
[Bitmap] Settings
[Enable] Check Box
Select this check box to enable application of bitmap images to scanned 
images.
☞When adding a bitmap image, it is processed when scanning is started. This 
can cause some delay before scanning actually begins, depending on the 
size and settings of the bitmap image.
☞When adding a bitmap image, a message is displayed until scanning 
begins.
[File name]
Specify the file name of the image to be applied.
☞The bitmap image with the specified file name is rotated 90 degrees when 
applied.
☞Only bitmap images (*.bmp files) can be applied.
[More] Button
Click this button to display the [Bitmap Settings for the Imprinter/Addon] 
dialog box. (See “Text/Bitmap Settings Dialog Boxes,” on p. 89.)
Orientation 0° 90° 180° 270°
Addon 
						

							Software Setup89
Chapter 3
Preview Panel
The specified content to be applied is displayed in the Preview panel.
☞You can magnify the Preview display in four steps with the left mouse 
button, and reduce it with the right mouse button.
[Show preview] button
Click this button to activate the Preview panel.
Text/Bitmap Settings Dialog Boxes
These dialog boxes open when you click the respective [More] button for text or 
bitmap in the [Addon] dialog box. Here you can make settings for text or bitmaps 
to be added onto scanned images.
Character String Settings for the Addon Dialog Box
Bitmap Settings for the Addon Dialog Box 
						

							90Software Setup
[Horizontal Offset]
Enter the desired offset from the edge of the document feeder inlet.
☞When applying an add-on to the front side, enter the offset from the left 
side of the feeder inlet.
☞When applying an add-on to the back side, enter the offset from the right 
side of the feeder inlet.
☞The entered offset is the distance to the left end of the applied text (or 
bitmap image.)
[Vertical Offset]
Enter the distance from the top edge of the page.
Print width
Enter the width of the bitmap image to be applied.
☞The bitmap image will be rotated 90° clockwise and compressed to the 
specified width before it is applied.
☞An error message may appear depending on the size of the image file. If 
this happens, reduce the Print width.
First Counter
This is the current setting for the single counter, or for the first counter if 
double counters are selected.
☞Settings can be changed in the First Counter settings dialog box.
Second Counter
This is the current setting for the second counter if double counters are selected.
☞Settings can be changed in the Second Counter settings dialog box.
[Change] Buttons
Click these buttons to display the respective counter settings dialog box. 
						

							Software Setup91
Chapter 3
First and Second Counter Settings Dialog Boxes
These dialog boxes open when you click the respective [Change] button in the 
[Character String Settings for the Addon] dialog box. Here you can make settings 
for counters to be added onto scanned images.
Start Value
Enter the start value for the counter.
Increment
This is the counter increment value. The counter increments by the value 
entered here.
Increment Trigger
Specifies the type of event that triggers a counter increment.
[New File] (ISIS driver only)
The counter increments when a batch separation occurs according to the Batch 
Separation settings on the [Others] tab sheet. (See “Batch Separation (ISIS 
driver only),” on p. 83.)
[Every Page]
Increments once per page.
[None]
No counter increment occurs.
Reset Value
Select the initial value when the counter is reset.
Reset Trigger
Specifies the type of event that resets the counter.
[New File] (ISIS driver only)
The counter is reset when a batch separation occurs according to the Batch 
Separation settings on the [Others] tab sheet. (See “Batch Separation (ISIS 
driver only),” on p. 83.)
[Every Page]
Resets the counter once per page.
[None]
No counter reset occurs. 
						

							92Software Setup
2. Practical Examples
This section provides examples of settings for the DR-6030C ISIS/TWAIN driver. 
Refer to these examples when making ISIS/TWAIN driver settings. For 
descriptions of particular setting items, see “ISIS/TWAIN Driver Properties 
Dialog Box,” on p. 64.
Scanning Both Sides of Pages
• To scanning both sides of pages
Select [Duplex] for the Scanning Side setting on the [Basic] tab sheet. (See 
“Scanning Side,” on p. 69.)
• To avoid scanning blank pages, such as pages at the back of a 
document
Select [Skip blank page] for the Scanning Side setting on the [Basic] tab sheet. 
Duplex scanning is performed, and pages images detected as blank are not 
saved. (See “Scanning Side,” on p. 69.)
• If blank pages are not skipped, even when [Skip blank page] is 
selected
Increase the [Content density] in the [Blank Skip Setting] dialog box. If the 
[Content density] is set too low for documents with a light background, they 
may not be detected as blank pages, and not be skipped. (See “Scanning Side,” 
on p. 69.)
• If documents with text are skipped as blank pages
Decrease the [Content density] in the [Blank Skip Setting] dialog box. If the 
[Content density] is set too high for documents with little text, they may be 
incorrectly detected as blank pages, and be skipped. (See “Scanning Side,” on 
p. 69.) 
						

							Software Setup93
Chapter 3
Scanning Non-Standard-Size Documents
• To scan non-standard-size documents
If non-standard-size documents are scanned with a standard size selected for 
the Page Size setting on the [Basic] tab sheet, black regions may appear around 
the scanned document image. To scan non-standard-size documents, select 
[Auto-detection] as the [Page Size]. Page size is then detected automatically. 
(See “Page Size,” on p. 68.)
• To scan long-page documents
Set the scanning mode to Long Document mode, and select [Auto-detection] 
as the [Page Size] in the Properties dialog box. Document pages may be up to 
three meter long.
(See “Long Document Mode,” on p. 53, and “Page Size,” on p. 68)
• To register a non-standard page size
A non-standard page size not already registered as a page size selection can be 
saved as a custom page size by selecting the [Custom] button in the Scan Area 
dialog box. (See “User Preferences,” on p. 66.)
Adjusting the Scan Area
• To scan only part of the document page
You can specify any area on the page in the Scan Area dialog box. However, 
scan area settings are ignored when [Auto-detection] is selected as the [Page 
Size]. (See “[Scan Area] Dialog Box,” on p. 73.) 
						

							94Software Setup
With the TWAIN driver, load a document in the scanner and click the 
[Preview] button to scan one page. The scanned image is displayed in the Area 
window so that you can adjust the scan area while viewing the preview image. 
(See “Preview Button (TWAIN driver only),” on p. 74.)
With CapturePerfect, the last scanned image appears in the Area window. After 
executing [Scan Single Page], open the Scan Area dialog box to view the 
scanned image in the Area window, where you can set the scan area while 
viewing the preview image.
• To avoid losing the edges of an image due to shifting of the 
document page, or to remove black frames from around images
Adjust the scan area using the [Margin] slider in the Scan Area dialog box.
If the edges are missing from the image, move the slider to the right to expand 
the scanning area. Alternatively, to eliminate the black frame around scanned 
images, move the slider to the left to reduce the scanning area.
Scanning Multiple Documents
• To scan a document that cannot be loaded all at once as multiple 
separate batches
Set the [Feeding Option] on the [Basic] tab sheet to either [Automatic Feeding] 
or [Panel Feeding]. (See “Feeding Option,” on p. 83.)
When [Automatic Feeding] is selected as the [Feeding Option], the scanner 
detects documents and starts scanning as they are loaded, so continuous 
scanning is available just by loading the document batches repeatedly.