Canon scanner imageFORMULA DR6030C User Manual

							Document Scanner
User’s Guide
Please read this manual before using this unit. After you finish
reading this manual, keep it in a safe place for future reference. 
						

							
Document Scanner DR-6030C
Easy Start Guide
This manual describes the procedures for setting up the scanner for use. For details on how to use the scanner, 
read the after p. 1.
Checking the Package Contents
If any of the items listed below are missing or damaged, contact your local authorized Canon dealer or 
service representative. Keep the package and packing materials for storing or transporting the scanner.
Items included in this package are subject to change without notice.
Removing the Packing Materials
Perform the following steps to remove all the orange tape and protective materials from it. After removing 
them, replace the cover and unit.
Installing the Software
Install the “DR-6030C driver” to use the scanner and the “CapturePerfect 3.1” to use scanning function.
1.Peel off the orange tape.2.Carefully open the 
document feed tray.3.Peel off the orange tape.
4.Open the upper unit.5.Remove the packing materials.
CANON  CANADA  INC.
6390  DIXIE  RD
MISSISSAUGA   ON   L5T   9Z90880281099-L5T1P7-BR01
DR-6030C Power Cord Document Eject Guide USB Cable
User’s Guide 
(This Manual)
DR-6030C
Setup Disc* Registration Card
(U.S.A and Canada only)
* This setup disc is inserted in this manual. For details on the disc, refer to “About the Setup Disc”(See p. 17).
Warranty Card
(U.S.A and Canada only)Cleaning Cloth (1)
Do not grab this 
protrusion.
6.Remove the roller cover and take out the packing materials.
1.Insert the DR-6030C Setup Disc 
into the computer’s CD-ROM 
drive.
The setup wizard automatically starts 
up when you insert the CD-ROM into 
the CD-ROM drive. If the setup 
wizard does not start up, run the 
setup.exe application on the CD-
ROM.
2.Click [Typical Installation] and follow the 
instructions to install the software.3.After the installation click [Exit] to close the 
installation window.
‰ Log on to Windows with an account that has administrator privileges.
‰ Close all other applications before installing the software.
For Windows Vista
When the “User Account 
Control” screen appears, 
log on as an administrator 
and click [OK]. 
						

							
Connecting the Scanner to Your PC
Connect the scanner with the following 1 to 5 procedures. The scanner can be connected to a computer in 
two ways. Select a connection method appropriate to your computing environment.
• “USB connection”…connecting to a standard USB port on the computer.
• “SCSI connection”…connecting an SCSI card to one of the computer’s expansion slots.
Turning On the Power (Scanner Recognition)
When you turn the scanner connected to the PC ON, the plug-and-play function recognizes the scanner, and the 
device driver is automatically installed.
1.Check the connection between the 
scanner and the computer.
2.Turn ON the scanner.
3.Turn ON your computer (when 
connecting by SCSI).
4.Windows recognizes the scanner 
and performs installation 
automatically.
Selecting the Scanner
You must select your scanner before using it with an  ISIS- or TWAIN- compatible scanning application or 
“CapturePerfect 3.1” installed on step 3.
When you select your scanner with the “Using CapturePerfect 3.1.” (p. 32)
If you use another application, refer to the manual  for your scanning application when selecting the 
scanner.
1.Turn OFF the scanner.
2.Plug the power cord into the 
power connector of the scanner.
3.Plug the power cord into the 
power outlet.
4.Turn OFF your computer 
(when connecting by SCSI).
5.Connect the USB cable or the 
SCSI cable to your computer.
Turn OFF 1.
2. 3.
4.  Tur n OFF
(when connecting by SCSI)
5.  USB cable
(when connecting by USB) 5.
 SCSI cable
(when connecting by SCSI)
Type B
Type A
Power cord
‰ Do not use both a USB connection and an SCSI connection at the same time.
‰ Use only the supplied power cord.
‰ SCSI cable is not supplied. Acquire an SCSI cable beforehand that matches the shape of the connectors 
on your SCSI card and the scanner.
‰ When using the scanner in a daisy chain connection with other SCSI devices, pay attention to the 
following points:
zThe default setting for the SCSI ID is “SCSI 
ID=2.” Set the dip switches so that the 
scanner’s SCSI ID is different from all other 
SCSI devices on the chain.
z The scanner has a built-in SCSI terminator that 
is permanently set to [ON]. When using the 
scanner in a daisy chain connection, make 
sure that it is connected as the terminating 
device and that the terminators of all other 
SCSI devices in the chain have been set to 
[OFF].
OFF
ON 12SCSI ID SW1 SW2
2 OFF OFF
3 ON OFF
4 OFF ON
5ONON
Dip Switches
Default Position (SCSI ID=2)
Power Switch
ON Position
‰ When the scanner is connected by an SCSI cable, always turn on the scanner before the computer. 
Turning on the computer first may prevent it from recognizing the scanner properly.
‰ Log on to Windows with an account that has administrator privileges.
‰ Wait at least 10 seconds before turning the scanner on again after turning it off.
‰ When the scanner’s Auto Power OFF function is enabled, the scanner will turn OFF automatically if no 
operations are performed for 4 hours. To turn the power back on again, turn off the power switch and then 
turn it back on again. When doing this, wait at least 10 minutes after operation of the Auto Power OFF 
function before turning the power back on again.
zWhen installation is finished, a balloon help pop-up appears.
z The scanner is registered on the computer as “CANON DR-6030C USB” (or “CANON DR-6030C SCSI”) in 
the “Imaging Device” directory of the Device Manager.
The setup is now complete. 
						

							
i
FCC REGULATIONS (For 120 V model)
Document Scanner, Model M111061
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.
Note:
 This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 
- Reorient or relocate the receiving antenna. 
- Increase the separation between the equipment and receiver. 
- Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected. 
- Consult the dealer or an experienced radio/TV technician for help. 
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the eq uipment unless otherwise specified in the manual. If 
such changes or modifications should be made, you could be required to stop operation of the 
equipment. 
Canon U.S.A. Inc.
One Canon Park, Melville, NY 11747, U.S.A.
Tel. No. (800)652-2666
RADIO INTERFERENCE REGULATIONS (For 120 V models)
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus 
as set out in the Interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the 
Industry Canada.
RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE (For 120 V models)
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils 
numériques de Classe B prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques”, 
NMB-003 édictée par l’Industrie Canada.
MODEL NAMES
The following names may be provided for the sefety regulations in each sales region of this Document 
Scanner.
Model DR-6030C: M111061 
						

							ii
READ CAREFULLY BEFORE OPENING THE SEALED DISK PACKAGE
CANON SOFTWARE LICENSE AGREEMENT
IMPORTANT-READ THIS AGREEMENT BEFORE OPENING THE SEALED DISK PACKAGE! BY OPENING THE 
SEALED DISK PACKAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY THIS AGREEMENT. 
This legal document is a license agreement between you and Canon Electronics Inc. (“Canon”). BY OPENING THE SEALED DISK 
PACKAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE 
TERMS OF THIS AGREEMENT, DO NOT OPEN THE SEALED DISK PACKAGE AND PROMPTLY RETURN THE CANON SCANNER, THE DISK PACKAGE CONTAINING SCANNER DRIVER SOFTWARE PROGRAMS AND/OR SCANNER UTILITY SOFTWARE PROGRAM PROPRIETARY TO CANON OR ITS LICENSOR (THE “SOFTWARE”) AND THE ACCOMPANYING DOCUMENTATION AND OTHER ITEMS TO THE PLACE WHERE YOU OBTAINED THEM FOR A REFUND BEFORE THEY ARE USED OR OPENED OR UNPACKED.
In consideration of the right to use the SOFTWARE, you agree to abide by the terms and conditions of this Agreement.
1. GRANT OF LICENSE: Canon grants you the personal, non-exclusive right to use the SOFTWARE only on a single computer. You 
shall need to obtain multiple licenses separately from Canon when you shall install the SOFTWARE on multiple computers.
You shall not assign, sublicense, sell, rent, lease, loan, convey or transfer to any third party, or send or bring the SOFTWARE out of the 
country where you originally obtain it to other countries without required authorization of applicable governments, or copy, duplicate, translate or 
convert to another programming language the SOFTWARE or accompanying documentation, except as expressly provided herein. 
Except as expressly permitted under the applicable law, you shall not alter, modify, disassemble, decompile or otherwise reverse engineer 
the SOFTWARE or accompanying documentation and you also shall not have any third party do so.
2. BACK-UP COPY: You may make one copy of the SOFTWARE solely for a back-up purpose or copy the SOFTWARE onto the 
permanent storage device (e.g. a hard disk) of your computer and retain the original for a back-up purpose. Except as expressly permitted under the 
applicable law, any other copying of the SOFTWARE is a violation of this Agreement. You must reproduce and include the copyright notice on the 
back-up copy.
3. SUPPORT AND UPDATE: Canon, Canon’s affiliate, their distributor or dealer is not responsible for maintaining or helping you to use 
the SOFTWARE. No updates, fixes or support will be made available for the SOFTWARE.
4. LIMITED WARRANTY AND DISCLAIMER OF INDEMNITY: Canon, Canon’s affiliate, their distributor or dealer will not 
guarantee uninterrupted service, or absence or correction of errors. Therefore, the SOFTWARE is licensed on an “AS IS” basis without warranty of 
any kind. The diskette on which the SOFTWARE is recorded is warranted against defective material or workmanship under normal use for a period of 
ninety (90) days from the date you purchased the same as evidenced by a receipt or otherwise. The limited warranty does not apply if the failure of the 
diskette resulted from accident, abuse or misapplication of the SOFTWARE and shall not extend to anyone other than the original user of the 
SOFTWARE.
CANON, CANON’S AFFILIATE, THEIR DISTRIBUTOR OR DEALER DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING 
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE OR 
ACCOMPANYING DOCUMENTATION.
NEITHER CANON, CANON’S AFFILIATE, THEIR DISTRIBUTOR NOR DEALER IS LIABLE FOR ANY LOSS OR DAMAGE 
INCLUDING CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE SUCH AS LOSS OF PROFITS, EXPENSE OR INCONVENIENCE, 
WHATSOEVER CAUSED BY OR ARISING OUT OF THE SOFTWARE, ACCOMPANYING DOCUMENTATION OR THE USE THEREOF.
CANON, CANON’S AFFILIATE, THEIR DISTRIBUTOR OR DEALER SHALL HAVE NO OBLIGATION TO INDEMNIFY YOU 
AGAINST ANY CLAIM OR SUIT BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE, ACCOMPANYING 
DOCUMENTATION OR THE USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY.
THE ABOVE IS CANON’S ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDY IN CONNECTION WITH THE SOFTWARE 
AND ACCOMPANYING DOCUMENTATION.
5. TERM: This Agreement is effective upon opening the sealed disk package and remains in effect until terminated. You may terminate 
this Agreement by destroying the SOFTWARE and any copy thereof. This Agreement will also terminate if you fail to comply with any of the terms 
of this Agreement. In addition to Canon enforcing its respective legal rights, you must then promptly destroy the SOFTWARE and any copy thereof.
6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE: The SOFTWARE is provided with RESTRICTED RIGHTS. Use, 
duplication or disclosure is subject to restrictions as set forth in either subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software 
clause at DFARs 252.227-7013 or subparagraph (c) (1) and (2) of the Commercial Computer Software Restricted Rights Clause at FAR 52.227-19, as 
applicable.
7. SEVERABILITY: In the event that provision of this Agreement is declared or found to be illegal by any court or tribunal of competent 
jurisdiction, such provision shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions of this 
Agreement shall remain in full force and effect.
8. ACKNOWLEDGEMENT: BY OPENING THE SEALED DISK PACKAGE, YOU ACKNOWLEDGE THAT YOU HAVE READ 
THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU ALSO AGREE THAT 
THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON 
CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR 
WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND CANON RELATING TO THE SUBJECT MATTER HEREOF. NO 
AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED REPRESENTATIVE OF 
CANON.
Should you have any questions concerning this Agreement, or if you desire to contact Canon for any reason, please write to Canon’s local affiliate. 
						

							
iii
Trademarks
• Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks 
or registered trademarks in other countries.
 Microsoft, Windows, Windows Vista and SharePoint are registered trademarks of Microsoft Corporation in the  United States and other countries.
 ISIS is a trademark of EMC Corporation, in the United States.
 Intel and Pentium are registered trademarks of Intel Corporation.
 Adaptec is registered trademark of Adaptec Inc.
 Adobe, the Adobe logo, Acrobat, the Adobe PDF logo, and Adobe Reader are either registered trademarks or  trademarks of Adobe Systems Incorporated in the United States and/or other countries.
 Other product and company names herein may be the trademarks of their respective owners.
Copyright
Copyright 2010 by CANON ELECTRONICS INC. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or 
mechanical, including photocopying and recording, or by any information storage or retrieval system 
without the prior written permission of CANON ELECTRONICS INC.
Disclaimers
The information in this document is subject to change without notice.
CANON ELECTRONICS INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS 
MATERIAL, EITHER EXPRESS OR IMPLIED, EXPECT AS PROVIDED HERE IN, INCLUDING 
WITHOUT LIMITATION, THERE OF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, 
FITNESS FOR A PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT. CANON 
ELECTRONICS INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR 
CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM 
THE USE OF THIS MATERIAL. 
						

							INTRODUCTION1
INTRODUCTION
Thank you for purchasing the Canon DR-6030C document scanner. Please 
read this manual thoroughly before using the machine to familiarize yourself 
with its capabilities, and to make the most of its many functions. After reading 
this manual, store it in a safe place for future reference.
Manuals for the Scanner
The DR-6030C Scanner has a User’s Guide (this manual) included in the 
package, a CapturePerfect 3.1 Operation Guide, and Online Help.
For details on checking the packing list, software installation, computer 
connections, and scanner setup, see the Easy Start Guide on foldout page in 
this manual. For details on preparing the scanner, and details on scanning and 
how to handle the scanner, see the User’s Guide.
The following describes the manuals packaged with the scanner. Before you 
start using the scanner, be sure to read this User’s Guide.
Easy Start Guide (foldout page in this manual)
This manual describes the procedure for removing the scanner from its box 
through to setting up the scanner for scanning.
User’s Guide (this manual)
This manual describes the basic operations for using the scanner, performing 
routine maintenance, and troubleshooting, and provides the scanner 
specifications.
CapturePerfect 3.1 Operation Guide (PDF manual)
CapturePerfect 3.1 and its Operation Guide are both installed on your 
computer with CapturePerfect 3.1 Operation Guide. (See p. 34.) 
						

							2INTRODUCTION
Symbols Used in This Manual
The following symbols are used in this manual to explain procedures, 
restrictions, handling precautions, and instructions that should be observed for 
safety.
WARNING
Indicates a warning concerning operations that may lead to death 
or injury to persons if not performed correctly. To use the machine 
safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury 
to persons, or damage to property if not performed correctly. To 
use the machine safely, always pay attention to these cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read these items 
carefully to operate the machine correctly, and avoid damage to the machine.
Note
Indicates a clarification of an operation, or contains additional explanations for 
a procedure. Reading these notes is highly recommended. 
						

							Contents3
Contents
Easy Start Guide .......................................................... Foldout
INTRODUCTION ...................................................................... 1
Manuals for the Scanner ............................................................... 1
Symbols Used in This Manual ....................................................... 2
Chapter 1 Before Using the Scanner ................................. 5
1. Important Safety Instructions ..................................................... 6
Installation Location ................................................................ 6
Power ...................................................................................... 7
Moving the Scanner ................................................................ 7
Handling .................................................................................. 8
Disposal .................................................................................. 9
2. Features of the DR-6030C Document Scanner ....................... 10
3. Names and Functions of Parts ................................................ 13
4. Installation Requirements ........................................................ 15
5. About the Setup Disc ............................................................... 17
Chapter 2 Using the Scanner ............................................ 19
1. Documents ............................................................................... 20
2. Preparing the Trays ................................................................. 22
Setting Up the Document Feed Tray .................................... 22
Document Eject Tray ............................................................ 23
Installing the Document Eject Guide ..................................... 25
3. Placing Documents .................................................................. 27
How to Feed with the Page Separation Mode ...................... 27
How to Feed with the Bypass Mode ..................................... 30
4. Scanning Documents ............................................................... 32
Using CapturePerfect 3.1 ...................................................... 32
Starting CapturePerfect 3.1 with the Start Button ................. 40
5. Using Patchcode Sheets ......................................................... 45
About Patchcode Sheets ...................................................... 46
Patchcode Pattern Function .................................................. 47
How to Use Patchcode Sheets ............................................. 47
6. Clearing a Paper Jam .............................................................. 49
7. Other Functions ....................................................................... 52
Double Feed Detection Function .......................................... 52
Skew Detection Function ...................................................... 53
Long Document Mode ........................................................... 53
Standby Mode Settings ......................................................... 59
MultiStream Function ............................................................ 60
Auto Power OFF Function .................................................... 60 
						

							4Contents
Chapter 3 Software Setup ................................................. 63
1. ISIS/TWAIN Driver Properties Dialog Box ............................... 64
[Basic] Tab Sheet .................................................................. 65
[Brightness] Tab Sheet ......................................................... 74
[Image processing] Tab Sheet .............................................. 78
[Others] Tab Sheet ................................................................ 81
[Addon] Dialog Box ............................................................... 85
2. Practical Examples .................................................................. 92
Scanning Both Sides of Pages ............................................. 92
Scanning Non-Standard-Size Documents ............................ 93
Adjusting the Scan Area ....................................................... 93
Scanning Multiple Documents .............................................. 94
Image Adjustments for Scanning .......................................... 96
Prescan ................................................................................. 99
Preserving Your Settings ...................................................... 99
Chapter 4 Appendices ..................................................... 101
1. Regular Maintenance ............................................................. 102
Cleaning the Scanner ......................................................... 102
Cleaning the feed path ........................................................ 102
Cleaning the Sensor Glass, Shading Boards, 
and the Rollers .................................................................... 103
Cleaning the Shading Boards ............................................. 106
2. Removing and Attaching the Rollers ..................................... 108
Roller Replacement Cycle .................................................. 108
Resetting the Counter ......................................................... 109
Removing and Attaching the Pickup Roller ......................... 113
Removing and Attaching the Feed Roller ........................... 116
Removing and Attaching the Retard Roller ......................... 119
3. Troubleshooting ..................................................................... 123
4. Uninstalling Software ............................................................. 131
5. Specifications ......................................................................... 134
Specifications ...................................................................... 134
Options ................................................................................ 136
Replacement parts .............................................................. 136
External Dimensions ........................................................... 137
Index .................................................................................... 138