Canon scanner imageFORMULA DR6030C User Manual

Software Setup65
Chapter 3
[Basic] Tab Sheet
This [Basic] tab sheet is displayed when the driver is called directly and not from 
another settings dialog box. The driver is called directly when using applications 
that do not have their own scanner setting or scanning dialog boxes, such as 
CapturePerfect and Job Registration Tool.
Basic Tab Sheet (ISIS/TWAIN driver)
This [Basic] tab sheet is displayed when the driver is called directly and not from 
another settings dialog box. The driver is called...

66Software Setup
☞Refer to the descriptions of the following function for details about “Skip 
Blank Page,” “Auto Color Detection,” “Detect Page Size,” “Text Enhanced 
Enhancement Mode” and “Margin.”
• Skip Blank PageÆ [Scanning Side]
• Auto Color DetectionÆ [Mode]
• [Detect Page Size]Æ [Page Size]
• [Text Enhanced Mode]Æ [Mode]
•MarginÆ Scan Area Dialog Box
User Preferences
Click [Save] to open the [Save User Preference] dialog box.
The [Save User Preference] dialog box saves the current settings under...

Software Setup67
Chapter 3
☞Depending on the application program, operation may become unstable 
when [Auto Color Detection] is enabled. In that case, [Auto Color 
Detection] should be disabled.
☞When using an application that supports the MultiStream function (such as 
CapturePerfect), if [Auto Color Detection] is selected, the MultiStream 
function is disabled.
[Black and White]
Use this mode to scan text and line drawing documents as black and while 
(binary) images.
[Error Diffusion]
Use this mode to...

68Software Setup
Mode-Dependent Function Limitations
The following tab sheet functions are partially disabled according to the 
selected mode. Refer to “[Brightness] Tab Sheet,” on p. 74 for the [Brightness] 
tab sheet settings.
✓: Available for setting
— : Not available for setting
Page Size
Select the page size of the document to be scanned.
☞Select [Auto-detection] to scan the following kinds of documents.
• Documents of undetermined size
• Documents including mixed page sizes
• When using the Long...

Software Setup69
Chapter 3
• When scanning a page with a dark area at the left or right edge
• When scanning a glossy or reflective document
• When the brightness setting is incorrect
• When Custom setting is selected in the Gamma Settings dialog box
☞Depending on the application program, operation may become unstable 
when [Auto-detection] is enabled. In that case, [Auto-detection] should be 
disabled.
Dots per inch
Select the scanning resolution. 
☞Higher resolutions provide clearer images, but produce...

70Software Setup
The Content density should be adjusted according to document content, so 
that only blank pages are skipped: increase the setting if they are not 
skipped, and decrease the setting if non-blank pages are skipped.  
☞The Skip Blank Pages function may not work properly if the [Custom] 
setting is enabled in the Gamma Settings dialog box.
☞When the [Scan Single Page] scanning option is selected in the [Basic] tab 
sheet of the TWAIN driver, the [Simplex] scanning side setting is selected...

Software Setup71
Chapter 3
Image Quality
When 400 or 600 dpi resolution is selected, you can enable this and select 
either [Speed Priority] or [Image Quality Priority Image].
[Speed Priority]
This mode gives priority to scanning speed, and generates 400 or 600 dpi 
images from images scanned at 300 dpi. 
Although scanning speed is fast, image quality is slightly reduced.
[Image Quality Priority]
This mode gives priority to image quality, and scans at 600 dpi. 
When 400 dpi resolution is selected, 400...

72Software Setup
[Auto Color Detection Settings] Dialog Box
This dialog box appears when you select [Auto Color Detection], where you can 
make settings for detecting whether scanned images are color or black and white, 
and select the mode to use when an image is detected as black and white.
Color Sensitivity/Color Pixel Ratio
These settings are used to determine whether a document is a color document.
The scanner detects document colors according to the color sensitivity setting, 
and determines that...

Software Setup73
Chapter 3
[Scan Area] Dialog Box
In this dialog box you can define the area of the document page to scan on a 
selected page size, and register non-standard document page sizes. 
The Scan Area dialog box is different for ISIS and TWAIN drivers.
Scan Area Dialog Box (ISIS Driver)
Scan Area Dialog Box (TWAIN Driver)
Page Size
This setting is linked to the [Page Size] setting, for selecting the size of 
document pages to scan.
☞Clicking the [Custom] button opens the [Custom Page Size]...

74Software Setup
Area
Select the area to be scanned. 
☞Area settings here are overridden in the following cases:
• When the [Auto-detection] page size is selected
• When [Text Orientation Recognition] is enabled on the [Image 
processing] tab sheet
☞When [Deskew] is enabled on the [Basic] tab sheet, the specified area may 
be displaced when scanning.
Area Window
The size indicated for the Area window corresponds to the page size setting, 
and the area within the panel indicates the current scanning area....