Canon scanner imageFORMULA DR6030C User Manual

Using the Scanner45
Chapter 2
5. Using Patchcode Sheets
The DR-6030C ISIS driver and CapturePerfect 3.1 both support the automatic 
file separation function with patchcode sheets.
Patchcode patterns are printed on patchcode sheets which are used to 
automatically separate files. When the scanner recognizes a patchcode sheet 
during scanning, the files are automatically separated at the patchcode sheet or 
at the image of the next document.
Note
• Access “ISIS/TWAIN Driver Help” for information about...

46Using the Scanner
About Patchcode Sheets
Patchcode sheets are data in a portable document format (PDF). There four 
types; [PATCH II (A4)], [PATCH II (LTR)], [PATCH T (A4)], [PATCH T 
(LTR)] according to the paper size and pattern.
Click on the Windows start button, open [All Programs] - [Canon DR-6030C] - 
[PATCH X (XX)]. Print the patchcode sheet to use it.
Note
• To open patchcode sheets you need CapturePerfect 3.1, which is provided 
with the scanner, or an application associated with PDF format...

Using the Scanner47
Chapter 2
Patchcode Pattern Function
There are two types of patchcodes and their function changes according to 
their pattern.
„PATCH T (FILE A)
„PATCH II (FILE B)
How to Use Patchcode Sheets
1.
Print patchcode sheets on a printer. Print the patchcode sheets at their original 
size on paper that is the same size as the data.
Note
• Print [PATCH II (A4)] and [PATCH T (A4)] on A4 size paper.
• Print [PATCH II (LTR)] and [PATCH T (LTR)] on letter size paper.
IMPORTANT
Be careful to keep...

48Using the Scanner
IMPORTANT
Note the following points when copying a patchcode pattern to create a 
different size patchcode sheet.
• When copying a patchcode pattern, the copy should be the same size and 
density as the pattern on the original. Extremely dark or light copies may not 
be scanned correctly.
• Adjust the patchcode so that it fits into the effective area for detecting 
patchcode patterns.
(Effective area for detecting patchcode patterns.)0.2 (5 mm) 0.2 (5 mm)
Patchcode Patterns
0.2 
(5...

Using the Scanner49
Chapter 2
6. Clearing a Paper Jam
When paper jams occur during scanning, use the following procedure to clear 
them.
CAUTION
Be careful when removing jammed paper. It is possible to cut your 
hand on the edge of a sheet of paper.
1.Remove any documents that have been left in the eject tray.
2.Close the document eject tray.
IMPORTANT
If document ejection is stopped part way, perform this operation with the 
document eject tray extention open. Attempting to force the document eject...

50Using the Scanner
4.Remove the jammed document.
„When the jam occurred in the feed section
„When the jam occurred in the eject section
IMPORTANT
Be sure to pull the document out carefully, without applying too much force.
Should the document tear, be sure to remove any part remaining in the scanner.
5.Close the upper unit slowly. Be sure that the upper unit is completely closed by 
pushing on both edges with both hands until you hear a click.
IMPORTANT
Do not force the upper unit to close. Doing so may...

Using the Scanner51
Chapter 2
Note
• After removing the jammed paper, check to see if the last page was scanned, 
and then continue scanning.
• If a paper jam happens when “Rapid recover system” is enabled in the ISIS/
TWAIN driver settings, the image of the document is not saved and scanning 
stops. This allows you to continue scanning from the document that caused 
the paper jam after the paper jam is fixed. (See “[Rapid Recovery System] 
Check Box,” on p. 81.) 

52Using the Scanner
7. Other Functions
This scanner also supports the scanning functions described below.
Double Feed Detection Function ....................................... P. 52
Skew Detection Function ................................................... P. 53
Long Document Mode ........................................................ P. 53
Standby Mode Settings ...................................................... P. 59
MultiStream Function ............................................................

Using the Scanner53
Chapter 2
Skew Detection Function
If long documents are skewed, then they may rub against the feed slot or the 
edges of the feed path and be damaged. The scanner is equipped with a skew 
detector function that detects when a skewed document hits the edge of the 
feed slot. When a skewed document is detected, an error message is displayed 
and scanning stops.
Note
Small documents are not detected by the sensor even if they are skewed.
Long Document Mode
Normally the scanner can scan...

54Using the Scanner
Long Document Mode Settings
Follow the procedure below to set the long document mode.
1.Use the following procedure to open the [CANON DR-6030C USB Properties] 
(or [CANON DR-6030C SCSI Properties]).
1. Click the [Start] button, and then click [Control Panel].