Canon Projector WUX5000 User Manual

							Useful Functions Available 
During a Presentation
User’s Manual
Safety Instructions
Before Use Table of Contents
Appendix
Index
Appendix
Installation
Connecting to a NetworkProjecting an Image
Setting Functions from Menus
Maintenance
Installation Manual
81
Useful Functions 
Available During 
a Presentation 
						

							82
Useful Functions Available During a Presentation
Temporarily Blacking Out 
an Image
Press the BLANK button to black out the 
image.
Press the BLANK button again to show the 
image.
 You can set the screen state while black-
ing out the image in the menu. (P106)
 The lamp remains illuminated while the 
image is blacked out.
Freezing the Picture
Press the FREEZE button to freeze the 
moving image. The projector shows the 
following icon.
Press the FREEZE button again to cancel 
the FREEZE function.
 It is also cancelled when the input signal is 
terminated.
Useful when:
• You have finished the presentation.
• You want to divert attendees’ attention from 
the screen.
Remote control
Useful when:
• You want to perform a computer operation 
which is irrelevant to the proceedings of the 
presentation.
• You want to stop a moving image.
Remote control
Screen 
						

							83
Useful Functions Available During a Presentation
User’s ManualUseful Functions Available During a Presentation
Adjusting the Volume
Press the VOL button. The following 
screen appears.
 You can also adjust the volume level with 
the 
[] / [] buttons of the projector.
 Adjust the volume or mute setting on the 
computer if the volume level is too low.
 You can also adjust the volume level of the 
speakers connected via the audio output 
terminal.
Muting the Sound
Press the MUTE button to mute the sound. 
The projector shows the following icon.
Press the MUTE button again to cancel the 
mute function.
 You can also mute the sound of the speak-
ers connected via the audio output termi-
nal.
For the WX6000 / SX6000, depending 
on whether the AUDIO IN terminal has 
been set in the Audio in terminal select 
screen (P139), there may be no audio 
output in some cases.
Useful when:
• You want to adjust the volume level of the 
projector or external speakers.
Remote control
Useful when:
• You want to temporality mute unnecessary 
sound.
• You want to immediately mute the sound.
Remote control
Screen 
						

							Useful Functions Available During a Presentation
84
Zooming an Image
Press the + D.ZOOM button to enlarge a 
part of the image. Press the - D.ZOOM 
button to reduce the image size.
 The magnification appears on the screen.
You can move the area you want to zoom in 
on by using the 
[] / [] / [] / [] buttons.
You can restore the original size of the 
image by pressing the OK button.
Useful when:
• Zooming in on an object such as a small 
graph during a presentation (up to 12x).
• Focusing on the current subject.
µ«æ”ïScreen Remote control
Screen
Remote control 
						

							85
Useful Functions Available During a Presentation
User’s ManualUseful Functions Available During a Presentation
Showing the Elapsed 
Time
Press the P-TIMER button to start counting.
 The elapsed time is displayed on the lower 
right corner of the screen.
 Time is counted up to 59:59. The timer 
then returns to 00:00.
Press the P-TIMER button again to stop 
the timer.
 Press the P-TIMER button while the timer 
is stopped. The timer disappears from the 
screen. Then press the 
P-TIMER button to 
start counting from 00:00.
Useful when:
• You want to manage the timing of the presen-
tation.
Screen
Remote control 
						

							86 
						

							Projecting an Image Safety Instructions
Before Use Table of Contents
Useful Functions Available 
During a Presentation
Setting Functions from Menus
User’s Manual
Installation
Connecting to a Network
Maintenance
Appendix
Index
Appendix Installation Manual
87
Setting Func-
tions from Menus 
						

							88
How to Use Menus
Use the menus to set the operation of the projector in detail.
■Menu Configuration
The menu screen is divided into 5 tabs as shown below.
Input Signal Types for which a Menu Item is Displayed
Different menu items are displayed for different input signal types.
In the following explanation of each menu item, the input signal type for which the 
menu item is displayed is indicated as follows:Contents of menu
Menu items
[Display settings] tab
You can set the type of signal 
or the method of projection of 
the images input. [System settings] tab
You can set the operation of the projector.
[Image adjustment] tab
You can adjust the image quality 
and colors according to your 
preference.
[Network setting] tab
These settings are for when using the 
projector from a PC via a network.
For the network settings, refer to page 
165.
[Information] tab
You can check information about the 
signal types of the images projected 
and other projector-specific informa-
tion.
HDMIComponent
Digital PCAnalog PC
Input signal for which the 
menu item is displayed
Input signal for which the 
menu item is not displayed 
						

							How to Use Menus
89
User’s ManualSettin
g Functions from Menus
The menu screen is divided into 6 tabs as shown below.
Contents of menuMenu items
[Input settings] tab
You can set the type of signal or
the method of projection of the
images input.
[Image adjustment] tab
You can adjust the image qual-
ity and colors according to your
preference.
[Network setting] tab

These settings are for when using the
projector from a PC via a network.
For the network settings, refer to page 
165.
[Information] tab
You can check information about the
signal types of the images projected
and other projector-specific informa-
tion.
[Install settings] tab
This setting is used when installing the projector.
[System settings] tab
You can set the operation of the projector. 
						

							How to Use Menus
90
■Basic Menu Operations
The menus shown below are for WUX5000.
1Press the [MENU] button to display the menu window.
2Use the [] / [] buttons to select a tab.
 If the tab position is not highlighted in orange, use the [ ] / [ ] buttons to move the 
highlight to the top.
Remote control
ProjectorRemote control
Remote control
ProjectorRemote control