Home > Canon > Projector > Canon Projector WUX5000 User Manual

Canon Projector WUX5000 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon Projector WUX5000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							111
    Selecting an Image Quality
    User’s ManualSettin
    g Functions from Menus
    When the desired save destination is 
    selected, press the OK button to accept 
    your setting and then press the [Return] 
    button.
     The saved settings consist of the brightness, 
    contract, sharpness, gamma, color adjust-
    ment, advanced adjustment, and lamp mode 
    (WUX4000).
     The number of displayed user memories is 5, 
    however it is possible to save different set-
    tings for when the connected equipment is a 
    computer (ANALOG PC, DIGITAL PC or 
    HDMI (when [HDMI In] (P127) is [Computer]) 
    and when AV equipment is connected (COM-
    PONENT, HDMI (when [HDMI In] (P127) is 
    [Auto])). As a result, it is possible to save up 
    to 10 settings.
     The image mode name which was the basis 
    for the settings change is also saved in the 
    user memory. When a user memory is 
    selected as the image mode, the image 
    mode that was the base for that user memory 
    is displayed in the menu as [Baseline image 
    mode].
    Adjusting the Brightness
    [Brightness]
    You can adjust the brightness of images.
    MENU > [Image adjustment] > [Brightness]
    (The screen is for the WUX5000.)
    MENU > [Image adjustment] > [Brightness]
    When you have completed the adjust-
    ment, press the OK button to accept your 
    setting and then press the MENU button 
    or EXIT button (WX6000 / SX6000).
     The adjustment you have made is stored 
    as adjusted values for the input signals 
    and image mode of the current projection.
    HDMIComponent
    Digital PCAnalog PC
    [ ] Increases the brightness of an image.
    [ ] Decreases the brightness of an image. 
    						
    							Selecting an Image Quality
    112
    Adjusting the Contrast
    [Contrast]
    You can adjust the contrast of images.
    Adjust the difference between the light and 
    dark parts of the image to produce an 
    image with emphasized contrast or an 
    image that is soft.
    MENU > [Image adjustment] > [Contrast]
    (The screen is for the WUX5000.)
    MENU > [Image adjustment] > [Contrast]
    When you have completed the adjust-
    ment, press the OK button to accept your 
    setting and then press the MENU button 
    or EXIT button (WX6000 / SX6000).
     The adjustment you have made is stored 
    as adjusted values for the input signals 
    and image mode of the current projection.
    HDMIComponent
    Digital PCAnalog PC
    [ ] Increases the contrast of an image. 
    This emphasizes the darker and 
    brighter parts of the image on the pro-
    jected image.
    [ ] Decreases the contrast of an image. 
    The image becomes less vivid. 
    						
    							113
    Selecting an Image Quality
    User’s ManualSettin
    g Functions from Menus
    Adjusting the Sharpness
    [Sharpness]
    You can adjust the sharpness of images.
    MENU > [Image adjustment] > [Sharpness]
    (The screen is for the WUX5000.)
    MENU > [Image adjustment] > [Sharpness]
    When you have completed the adjust-
    ment, press the OK button to accept your 
    setting and then press the MENU button 
    or EXIT button (WX6000 / SX6000).
     The adjustment you have made is stored 
    as adjusted values for the input signals 
    and image mode of the current projection.
    Performing Gamma Cor-
    rection
    [Gamma]
    You can correct portions of an image that 
    are difficult to see because they are too 
    dark or bright.
    For the WUX5000 / WUX4000, correction 
    can be made by using the GAMMA button 
    on the remote control.
    MENU > [Image adjustment] > [Gamma]
    (The screen is for the WUX5000.)
    MENU > [Image adjustment] > [Gamma]
    When you have completed the adjust-
    ment, press the OK button to accept your 
    HDMIComponent
    Digital PCAnalog PC
    [ ] Increases the sharpness of an image.
    [ ] Decreases the sharpness of an image.HDMIComponent
    Digital PCAnalog PC
    [ ] Brightens the dark portion
    [ ] Darkens the bright portion 
    						
    							Selecting an Image Quality
    114
    setting and then press the MENU button 
    or EXIT button (WX6000 / SX6000).
     The adjustment you have made is stored 
    as adjusted values for the input signals 
    and image mode of the current projection.
     More detailed adjustment is possible by 
    using the detailed gamma correction 
    (P118).
    Adjusting Color
    [Color adjustment]
    You can adjust the color depth and hue of 
    images for each primary color, red, green 
    and blue. The color temperature can also 
    be adjusted.
    MENU > [Image adjustment] > [Color adjust-
    ment]
    When you have completed the adjust-
    ment, press the OK button to accept your 
    setting and then press the MENU button 
    or EXIT button (WX6000 / SX6000).
     The adjustments you have made are 
    stored as adjusted values for the input sig-
    nals and image mode of the current pro-
    jection.
    HDMIComponent
    Digital PCAnalog PC
    Color 
    levelAdjusts the intensity of each color.
    [ ] Increases the intensity of color.
    [ ] Decreases the intensity of color.
    Color 
    balanceAdjusts the color balance of a purplish 
    or greenish image.
    [ ] Corrects a purplish image.
    [ ] Corrects a greenish image.
    Color 
    temper-
    atureAdjusts the color temperature of the 
    image.
    []
    Changes to a bluish color (cold color).[]Changes to a reddish color (warm color).
    R / G / B 
    GainAdjust the intensity of each color.
    [ ] Increases the color intensity.
    [ ] Decreases the color intensity.
    R / G / B OffsetAdjusts the color reproducibility of 
    dark portions of each color.
    [ ] Increases the color reproducibility.
    []
    Decreases the color reproducibility. 
    						
    							115
    Selecting an Image Quality
    User’s ManualSettin
    g Functions from Menus
    Correcting the Image 
    According to the Ambi-
    ent Light
    [Ambient light]
    You can correct and more effectively 
    project an image according to the ambient 
    light on the screen.
    MENU > [Image adjustment] > [Advanced 
    adjustment] > [Ambient light]
    Examples of Ambient Light Level Settings
    Press the OK button to accept your setting 
    and then press the MENU button or EXIT 
    button (WX6000 / SX6000).
     [Off] is the factory default.
     [Ambient light] can be set only in the fol-
    lowing image modes.
    -HDMI (when [HDMI In] is [Auto]) or 
    COMPONENT:
     Video, Cinema, Photo/sRGB
    -HDMI (when [HDMI In] is [Computer]), 
    DIGITAL PC or ANALOG PC:
     Photo/sRGB
    HDMIComponent
    Digital PCAnalog PC
    OffProjects an image with no correc-
    tion.
    AdjustYou can specify the type and 
    level (brightness) of the ambient 
    light.
    TypeTungsten Select this if the 
    ambient light 
    source is a light 
    bulb or bulb color 
    fluorescent.
    Fluorescent Select this if the 
    ambient light 
    source is a day 
    white fluorescent.
    Fluorescent H Select this if the 
    ambient light 
    source is a day-
    light color fluores-
    cent.
    LevelL Select this if the ambient light 
    is low.
    M Select this if the ambient light 
    is normal.
    H Select this if the ambient light 
    is high (bright).
    LevelExample Location
    LProjection room, sports bar, etc.
    MPhoto studio, gallery
    HConference room, lecture room 
    						
    							Selecting an Image Quality
    116
    Noise Reduction
    [Noise reduction]
    You can reduce image noise.
    MENU > [Image adjustment] > [Advanced 
    adjustment] > [Noise reduction]
    Press the OK button to accept your setting 
    and then press the MENU button or EXIT 
    button (WX6000 / SX6000).
     The factory default for HDMI (when [HDMI 
    In] (P127) is set to [Auto]) is [Off] and 
    when Component is used, it is set to 
    [Weak].
     Noise reduction may produce motion arti-
    facts when projecting fast-moving images.
     Select [Weak] for fast-moving images. 
    Select [Strong] for slow-moving images.
     The adjustment you have made is stored 
    as adjusted values for the input signals 
    and image mode of the current projection.
     When [HDMI In] (P127) is [Computer], this 
    setting is not displayed.
    Dynamic Gamma
    [Dynamic gamma]
    You can adjust the gradation representa-
    tion of light and dark portions of an image 
    automatically.
    MENU > [Image adjustment] > [Advanced 
    adjustment] > [Dynamic gamma]
    Press the OK button to accept your setting 
    and then press the MENU button or EXIT 
    button (WX6000 / SX6000).
     The factory default settings are [Off] when 
    the connected equipment is a Computer 
    (ANALOG PC, DIGITAL PC, HDMI (when 
    [HDMI In] 
    (P127) is [Computer])) and 
    [Weak] when the connected equipment is 
    AV equipment (COMPONENT, HDMI 
    (when [HDMI In] (P127) is [Auto])).
     The adjustment you have made is stored 
    as adjusted values for the input signals 
    and image mode of the current projection.
    HDMIComponent
    Digital PCAnalog PC
    OffDisables noise reduction.
    Weak
    Middle
    StrongSpecifies the intensity of the noise 
    reduction in three steps.
    HDMIComponent
    Digital PCAnalog PC
    OffDynamic gamma is disabled.
    Weak
    Middle
    StrongSpecifies the intensity of the 
    dynamic gamma in three steps. 
    						
    							117
    Selecting an Image Quality
    User’s ManualSettin
    g Functions from Menus
    Memory Color Correction
    [Mem. color correct]
    This function produces beautiful skin 
    tones, blues, and other colors.
    MENU > [Image adjustment] > [Advanced 
    adjustment] > [Mem. color correct]
    Press the OK button to accept your setting 
    and then press the  MENU button or EXIT 
    button (WX6000 / SX6000).
    • The factory default settings are as follows.
    - For HDMI (when [HDMI In] ( P127) is set
    to [Computer]), Digital PC and Analog
    PC, when any image mode is used
    except [VividPhoto], the default setting
    is [Off]. When [VividPhoto] is used, the
    default setting is [M]. 
    - For HDMI (when [HDMI In] ( P127) is set
    to [Auto]) and Component, the default
    setting is [L], regardless of the image
    mode. 
     The adjustment you have made is stored  as adjusted values for the input signals 
    and image mode of the current projection.
    6-axis Color Adjust 
    (Detailed Color Adjust-
    ment)
    [6-axis color adjust]
    You can make fine adjustments to the 
    image colors with RGB (red, green, blue) 
    and CMY (cyan, magenta, yellow).
    MENU > [Image adjustment] > [Advanced 
    adjustment] > [6-axis color adjust]
    When you have completed the adjust-
    ment, press the  OK button to accept your 
    setting and then press the MENU button 
    or  EXIT  button (WX6000 / SX6000).
     [Off] is the factory default.
     The adjustments you have made are stored 
    as adjusted values for the input signals and 
    image mode of the current projection.
    HDMIComponent
    Digital PCAnalog PC
    Off Disables the memory color correc-
    tion function.
    L
    M
    H Specifies the intensity of the memory 
    color correction in three steps.
    HDMIComponent
    Digital PCAnalog PC
    Off Disables 6-axis color adjustment.
    If you select [Adjust], the previous 
    setting of 6-axis color adjustment 
    becomes active again.
    Adjust Enables 6-axis color adjustment.
    Use the [ ] / [ ] buttons to select 
    [ Hue], [  Saturation], or [
    * Bright-
    ness], then adjust them with the [ ] / 
    [ ] buttons.
    When color adjustments are com-
    pleted, press the  OK button.
    Reset Returns all adjustment values to zero. 
    						
    							Selecting an Image Quality
    118
    Detailed Gamma Correc-
    tion
    [Fine-Tune Gamma]
    The four gamma curves (white, red, green, 
    blue) can be adjusted. When the white 
    curve is adjusted, the adjustment is also 
    applied to the other three colors. This func-
    tion allows more fine-tuned gamma correc-
    tion. When either of these two functions is 
    adjusted, the settings of the other are over-
    written.
    MENU > [Image adjustment] > [Advanced 
    adjustment] > [Fine-Tune Gamma]
    Select [Fine-Tune Gamma] then press the 
    OK button. The following [Fine-Tune 
    Gamma] screen for confirmation appears.Use the [ ] / [ ] buttons to select the 
    color, then press the OK button. Next use 
    the [ ] / [ ] buttons to select a point on 
    the gamma curve, and use the [ ] / [ ] 
    buttons to adjust the position of the point. 
    When you have completed the adjust-
    ment, press the OK button to accept your 
    setting and then press the MENU button 
    or EXIT button (WX6000 / SX6000).
     The adjustments you have made are 
    stored as adjusted values for the input sig-
    nals and image mode of the current pro-
    jection.
     For details of gamma correction, refer to 
    page 113.
    HDMIComponent
    Digital PCAnalog PC 
    						
    							119
    Selecting an Image Quality
    User’s ManualSettin
    g Functions from Menus
    Reducing the Lamp 
    Brightness
    [Lamp mode]
    Reducing the lamp brightness reduces 
    power consumption and cooling fan noise.
    For the WUX4000, you can also enable or 
    disable this mode with the LAMP button on 
    the remote control.
    MENU > [Image adjustment] > [Lamp mode]
    Press the OK button to accept your setting 
    and then press the MENU button.
     [Normal] is the factory default.
     The adjustment you have made is stored 
    as adjusted values for the input signals 
    and image mode of the current projection.
    Resetting the Image 
    Adjustment Settings
    [Reset]
    You can reset the current image adjust-
    ment settings to the default settings. If 
    reset is performed when user setting 1 - 5 
    is selected for [Image mode], the settings 
    are returned to the settings that were 
    saved in [User setting 1 - 5].
    MENU > [Image adjustment] > [Reset]
     Only the setting for the combination of 
    input signal and image mode for the cur-
    rent projection is reset.
    HDMIComponent
    Digital PCAnalog PC
    NormalProjects an image at the normal 
    brightness level.
    QuietReduces the lamp brightness and 
    cooling fan noise.
    HDMIComponent
    Digital PCAnalog PC
    OKResets the image adjustment set-
    tings.
    CancelCancels resetting of the image 
    adjustment settings. 
    						
    							120
    Setting Various Functions
    Selecting the Power Man-
    agement Mode
    [Power management mode]
    You can turn off the lamp or projector auto-
    matically in order to save power when the 
    projector is not in use.
    MENU > [System settings] > [Power manage-
    ment mode]
    MENU > [System settings] > [Power manage-
    ment mode]
    Press the OK button to accept your setting 
    and then press the MENU button or EXIT 
    button (WX6000 / SX6000).
     [Off] is the factory default.
     During standby mode, the [POWER ON] 
    indicator and [STAND BY] indicator flash 
    alternately.
     You cannot enable the [Direct power on] 
    function (see the next item), if you select 
    [Off].
    HDMIComponent
    Digital PCAnalog PC
    OffDisables the power management 
    mode.
    StandbyIf no input signal is received for 30 
    seconds, the countdown will be dis-
    played and after 5 minutes, the 
    lamp will turn off.
    If it receives an input signal or is 
    operated during this period, it 
    resumes projection.
    ExitIf no input signal is received for 30 
    seconds, it displays the countdown 
    and turns off the projector after 5 
    minutes. 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon Projector WUX5000 User Manual